Photoshop :: Best Way To Change Parts Of The Body?
Nov 4, 2013What's the best way to change parts of the body? Should I be using masking?
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Split Body Into Multiple Parts?
Oct 30, 2013I have an insert that I'd like to split into several layers. Is it possible to do this with the split tool, or is it limited to only one "split tool" at a time?
In the picture, the wireframe is the 'insert', the letters indicative of cavities cut into the insert. The purple sketch lines would be typical of where the solid part would be split into multiple parts.
INVENTOR 2014 STANDARD
IOSX and PARALLELS
AutoCAD Inventor :: Error In Multi-body Parts
Apr 26, 2012what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
AutoCAD Inventor :: Multi Body And Importing Parts
Jan 27, 2012I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies View RelatedAutoCAD Inventor :: Moving Solids In Multi-body Parts?
Jan 26, 2013I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
AutoCAD Inventor :: Separating One Body That Is Made Up To Two Separate Parts?
Jan 9, 2012How do you separate two objects that are considered to be the same body.
I have an car airbox made up of two separate solid objects. How can I separate them? see the attached image for a better understanding of my situation.
AutoCAD Inventor :: Multi Body Parts Not Working In 2013 Pro And Standard?
Jun 7, 2012So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
AutoCAD Inventor :: Suppressing Bodies In Multi-body Parts In Drawing Views
Apr 17, 2013When I try to suppress the bodies in the multi-bodies part to clarify the drawing view, I can not do that the way I normally do that if I had an assembly and suppressed the component.
Is it something Autodesk can improve on or rather something I overlook.
Photoshop :: How To Change Body Silhouette Portions
Jun 6, 2011I want to reduce the length of the legs a bit and straighten the back one out a bit.How can you go about this without changing a lot of the anchor points? Is there a way to select a portion of the leg or image and move it separately?
View 3 Replies View RelatedPhotoshop :: How To Change Face Shape And Body Structure In CS5
Dec 5, 2011What are the steps to change face shape or body structure in Photoshop CS5?
View 7 Replies View RelatedAutoCAD 2010 :: Can't Change Radius Of Solid Body
Mar 19, 2012i can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
AutoCAD Inventor :: How To Export Body From Multi-body Part
Sep 12, 2013Can I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedAutoCAD Inventor :: How To Convert Surface Body In Solid Body
Mar 8, 2012How can I convert a surface body in a solid body?
I attach my file.
AutoCAD Inventor :: Creating Parts With Costs That Change With Dimension Change For BOM
Nov 16, 2011How do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
AutoCAD Inventor :: Change Material In BOM -> Not Possible For All Parts
Jan 10, 2013If I need to change the material of all parts in an assembly I find it convenient to do this in the BOM. In the 'parts only' view I add the material column, change the first one and just drag it down like in Excel.
There are however some parts where the material is greyed-out (see attached image) and I cannot change them in to something else. I already traced this to parts which are present in multiple different sub-assemblies. I guess that's also the reason for the blueish/red icon instead of a normal part icon.
If I open one of the sub-assemblies the part is fine and I can change the material.
Inventor 2013
AutoCAD Inventor :: Change Color Of Parts
Dec 23, 2012Inventor pro 2013 - how do I change the color of a part.Inventor 2012 had a menu called Color Override that I can't find now.
View 6 Replies View RelatedGIMP :: How To Change Parts Of Images Colour
May 22, 2013This video [URL]....be explains what I need best.
View 5 Replies View RelatedAutoCAD Inventor :: How To Change Or Edit A Link Between Parts
Feb 25, 2012I have two parts, one uses some parameters from another one by link.
Now I have copied both and need to update ties between copies since a copy still has a link to original part.
Seems like there is no possible to just change or edit a link from one part to another in Parameters window.
Instead to update a new link I should clean all borrowed parameters in all sketches, delete the folder, make new link and set all parameters back. is it possible to change or edit the link in some easy way?
AutoCAD Inventor :: Change Parts To Unique Layers In IDW
Nov 26, 2012Any macro to do it automatically....
i still have the change occurrence layer based on material macro but cant seem to find the change layer based on part...
yes we are still using autocad in conjunction with inventor, and on a side note have been quite enjoying the new parameters, dynamic blocks, easy scripts and customization features in autocad.
AutoCAD Inventor :: Cannot Change Material For The Some Parts In The Assembly BOM
Nov 9, 2013I wish I can open my general assembly BOM and set the proper Materials to my all my parts after migration from 2012 release.
But I cannot change Material for the some custom part in the assembly BOM in the Parts Only tab. Parts refusing to change a Material have special symbol and I guess it means “promoted assembly” – no info regarding these symbols.
I can change any Material in Structured and Model Data tabs but it is extremely inconvenient for the big assembly.
[URL]....
The questions is: Why those promoted assemblies have inaccessible Material in the Parts Only tab?
I have similar subassemblies built in similar way as you can see fro video, but one is treated as promoted assembly and other as promoted part, the question is what possible difference between those is?
AutoCAD Inventor :: How To Change BOM Structure Of Library Parts
Jun 25, 2013The BOM structure of the library parts is set up as "purchased" and I cannot change it for some reason..... is there any way to change this?
View 4 Replies View RelatedAutoCAD Inventor :: ILogic To Change Colors Of Parts
Mar 12, 2013I am looking for a rule that will search assembly down all levels and find .ipts with the material of plywood and when found change all plywoods to color Clear - Light.
View 9 Replies View RelatedAutoCAD Inventor :: Change Material For Multiple Parts At Once
Sep 20, 2011I need to change an entire assembly's parts to a different material. How can I do this without editing each part?
View 2 Replies View RelatedAutoCAD Inventor :: VBA / Change Materials For Standard Parts
Mar 13, 2003I couldn't found a way to change the materials of the standard parts in Inventor, so i made a (quick and dirty) VBA program so i can change the material and color of the publiced (and used in projects) parts.
View 1 Replies View RelatedAutoCAD Inventor :: Automate Change To IProperty Of Multiple Parts?
Jul 23, 2013Is there a way to change an iProperty, specifically the iProperties->Project->Project field for multiple parts automatically.
I use the iLogic Design Copy Tool to copy over an entire project, and for the most part the only changes is the project number.
I didn't see a way to change this in the Design Copy Tool, possibly there is some other tools that can do this that I don't know about. But if not, I am assuming a small script (VBA??) would be required to do this? whether it is in Inventor or just an outside program to carry out this change.
I found this old thread, but it seems that people just found another way to do this?
[URL]
My workflow would follow something like this:
-Use iLogic Design Copy Tool to copy over project to new folder
-Open up full assembly
-Run rule or script to update all parts in assembly with new Project iProperty
-Save
-update the drawings as I need, (they will all need to be reviewed as some parts will be modified anyways)
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: ILogic To Change Parts List Style
Feb 8, 2012Below are 2 rules that run in succession to create and save a parts list from a base view in a drawing.
I am now trying to set the parts list style to a custom style, ideally while creating the list.
Also, I have to manually go into the list to turn off visibility of certain items (based on material), does I can do this with Ilogic? I ask because these steps precede a rule that automates placing base views of all parts in the parts list. If I could get the style and visibility right, I could automate the entire process.
Looking for changing such a style with ilogic?
Inventor & Vault Pro 2012
Windows 7, 64bit
Core i7 920@2.67
8GB
CREATE PARTS LIST____
' Set a reference to the drawing document.
' This assumes a drawing document is active.
Dim oDrawDoc As DrawingDocument
oDrawDoc = ThisApplication.ActiveDocument
'Set a reference to the active sheet.
[Code] .....
AutoCAD Inventor :: Change Appearance Of Multiple Parts Simultaneously
Aug 1, 2013I have an assembly with multiple parts.
I wish to change the colour (how they're displayed) of a few of them.
When i right click on the part, i can select iProperties>Occurrence>Appearance
When i control + select multiple items, then right click, the Appearance tab is greyed out.
Not a huge problem at the moment, but in future, I may wish to make 30 + different parts a different colour and would like to do it in one step.
AutoCAD Inventor :: ILogic Rule To Change Parts List Style
Jul 2, 2013I need an ilogic rule to autmoatically change the style of the parts list in a drawing file.The parts list style already exist in the drawing.
View 2 Replies View RelatedAutoCAD Inventor :: Application Options Change When Opening Older Version Parts?
Feb 23, 2012These Application Options settings change not infrequently and for reasons that I cannot be certain of:
Sketch:
Enable Heads-up Display
Edit Dimension when created
Look at sketch...on...creation
Part:
No new sketch goes to x-y plane
This may happen after when I open parts from Inventor 2011 (maybe 2010) into 2012, then create a new part. I would expect the 2012 App Options to be the master, so I don't know why a legacy part would be allowed to change those settings.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
AutoCAD Inventor :: Change / Apply Sheet Metal Style To All Parts In Top Level Assembly
Oct 24, 2012I am using this code placed in the .ipt file to change Sheet Metal material
If Material_SM=1 TheniProperties.Material="Steel"SheetMetal.SetActiveStyle("RB_Mild Steel")ElseiProperties.Material="AISI316"SheetMetal.SetActiveStyle("RB_Stainless")End If
It works fine presuming code placed in every .ipt file to be ruled.
Is it possible to modify code in a way so when it placed in top assebly it runs through entire assembly finds all Sheet Metal parts and applys Material prpperties/Sheet metal style according Material_SM parameter.
Inventor 2013 SP2
Windows 7, 64 bits
RAM 18GB
Core TM2 Duo CPU 2,99 Gz
AutoCAD Civil 3D :: Pipe Network Parts Change To Default When Data Referenced Into Other Drawing?
Dec 21, 2010When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?
View 9 Replies View Related