I have been trying to upload some jpeg pics (saved for web) created in Photoshop 7.0. Every time I try to upload to a particular site, I get the message that there is an error, file name must not contain spaces. Now, I upload to other sites (E-Bay, etc) with no problem. I am using an I-Mac, which may well be the problem, but, then, other people use the same computer and have no problem.
I have tried saving the files using Graphic Converter, but no change.
I am renaming a bunch of blocks that had non-descriptive code names with new descriptive names for our power substation division. Example: 2002 -> Strain Clamp U Bolt.
I am debating whether I should put spaces in the new names or use the under-bar '_' for spaces. If I use spaces the names will look nicer and may word wrap better when I put these blocks into a tool palette. But I'm paranoid about using spaces because of the nagging feeling it might be a problem down the road, say with parsing in lisp code or something.
I've looked at adding spaces to a plan that is simply lines and arcs... no intellegent objects.
It could get somewhat messy doing Generate Spaces... if the doors and swings are frozen the bounding objects don't get found... but if the doors and swings are on... the spaces go in fairly well... but then the door swing is used as a boundardy.
First off, I don't mind the save as a copy feature. If I have a psd file with layers and smart objects and such, and I Save As > JPG, I don't want the jpg open, I want the psd open. I like how PS does that behavior, but I don't like how that jpg gets " copy" added to it's file name. Yes it's easy to remove, but I'm using a batch action on over 300 pictures, I don't feel like renaming 300 jpg's. Yes it's supposed to be a safety net, but I basically never work from jpg's as original's, and if for some reason I do, I set them as read only and copy the files off to a safe location, so I don't need it.
I know it's possible because my old school's computers with Photoshop CS5 never saved jpg's with copy in the file name. So, how do I stop PS CS5 from adding copy to my file names? Because I need Photoshop to not add copy to my file names on my work computer.
I would like to add in the right down corner, the file name of the picture.... I did it in the past under Picture Lab but I do not know how to do it under VideoStudio... Is it possible ?
I want to image trace this photo to create logo. However the way the logo will be applied means that there can be no negative space less than .35mm or 1pt or the heat transfer will have them blend together.
How can I image trace while maintain all spaces (both positive and negative) are atleast 1pt sq?
which is your favorite sharpen skill for photo ? which skill do you use for a print or upload via web like flickr ,one exposure i like a lot this skill URL....every image has a sharpen skill but i would like to know your favorite or more used for print or web upload.
I have Photoshop Elements 11. I designed a book cover with Microsoft Word 2010 and saved the file as a Pdf. I want to upload an image of this book cover to various web sites that require a Jpeg image and the book cover has to cover at least 85% of the image and require a pure white back ground. Pixel size can be 1,000 or more. I did go to the library to get reference books but, I can't ascertain from these books how to do this. I am a beginner to Photoshop and realize I will have to get training for future projects. I wanted to upload an image from my computer to show you the book cover but there was a dialogue box that appeared saying the file was too large to upload. The book cover I designed is 8.5' x 11.0"
I created an image using the new Gimp 2.8 update, but when I try to upload the image to Facebook it gets all blurry. Any other photos I upload are fine, and I made another image in Gimp 2.6 of the same size (2400 pixels x 1800 pixels) which uploads normally, but for some reason no matter what I do the new picture made in 2.8 always uploads blurry.
I exported the image to jpeg format (although I also tried png) without messing with the export settings at all. Do I need to change them to make it upload to Facebook normally?
I am having diffuculty with the blend tool! I tried to upload the image but it said it was't allowed. Not sure how to correctly explain the problem but I'll do my best. I am have trouble getting the blend tool to recognize the images. I can only select the very edge of the images and then it doesn't look like it should when it does blend. How I can upload the file to show what I am trying to say?
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
1. How do you check the overall size of an image in Lightroom 4 before exporting. In Photoshop it is image/size so what is it in Lightroom?
2. I have Canon raw files and tiffs and want to upload to 500PX and other web site galleries in one action. Is it possible? How do you set up an action to convert an image, say a tiff, to a certain size and then save as a jpeg and upload to 500pX using the plugin all in one action? At the moment I am saving the tiff as a jpeg to a correct size using a pre set, but then exporting to another folder ready to either manually upload or re-import to Lightroom as a jpeg then upload.
I have a drawing with loads of images on it. All I want to do is print the image name so instead of a picture showing it should say "banana.jpg" or whatever the image name is.
I've tried unloading the images and plotting, but nothing happens.
Can the pictures file name be printed directly on to each image so that a preview book could be printed by Blurb with each photograph numbered.I can do this in slideshow but when I export the files for printing the numbers are gone.Several of my friend in the profession would also like the ability to apply the file names in this way.
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD: IMG_0001.NEF ... IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF ... IMG_0300 {shot by John Doe}.NEF
I have a text file with a list of image tile names with their bottom left hand easting and northing see attached. I have a lisp that asks for the name of the image then should insert the image at its coordinate with a predefined scale and rotation but it isn't working so I would like an alternative method to test.
I'm making an image that I want to have 5 different scales of. The scales are: 128x128, 64x64, 48x48, 32x32, 16x16. You guessed it, I'm making a favicon with multiple layers.
I create a canvas size 128x128 to start. Then I add my image to the canvas. I want the image to be transparent, so I remove the background by moving it up to layer 0 and deleting it. Now I hit (CTR + J) to create a copy of this layer to resize to a 64x64. The problem I have is when I copy the image it only copies the image and not the entire layer canvas size.the logo is about 126x90 so that’s what it copies. I need to make this image the entire 128x128, without losing transparency. Essentially what I am asking is can I add the extra 1 px to the width and 38 px to the height without actually changing the visual of the logo?
i am using PS CS4. this is my second day with photoshop. i am very familiar with GIMP but i needed PS for making web site layout. so i downloaded 1G trial and now i do not know how to add a new image as layer in existing image. i tried to drag and drop and tried import , open as but could not find a way to accomplish that.
in GIMP it is file->open as layer option but in PS i could not find similar option.
the reason i want to do is that i want to add a image in header of web page layout.
adding text to an image. I have followed the instructions in both books and videos on how to add text (using the text tool) and when I get to the point of typing text in, it doesn't go 'in'. The box that I assume it should show up in just stares at me - blank.
how to do for the life of me is make the phone look skinny like an hourglass look and the second I would like the opposite and make it look chubby. Advice on how to achieve this would be great, I tried the transform/skew%distort&perspective tools but am unable to achieve the effect I invision because when I try to move a corner the other corners and pull points are affected. Sorry probobly doesn't make much sense. The distort tool was the closest I could get to the hourglass look but it was too skinny..
