Photoshop :: Why Is The Polar Coordinates Option Disabled?
Nov 9, 2008Why is the Polar Coordinates option disabled?
View 2 Replies
ADVERTISEMENT
Photoshop :: Polar Coordinates Filter
Apr 1, 2013I am trying to use the Polar Coordinates filter. But when I select it, I only get 180 Degree of the coordinates with a big hole in the center like a donut. I How can I get it to reset so I get the full 360 from a center point? I will attach a screen shot.
View 2 Replies View RelatedAutoCad :: Determining Polar Coordinates On Hard Copy Drawing
Aug 19, 2012I just started my CAD classes. I have been doing basic 2d drawing and just learning the commands etc.
My question concerns polar coordinates. I know how they work, but are you expected to be able to get polar coordinates off lets say a hard copy drawing with no annotations.
My homework so far has always had the length of the lines depicted on the drawing but not the angles. So if I was required to replicate a drawing that had no annotation is there any way other than guessing or whipping out my protractor.
This is just a nagging thought as I strive to understand CAD.
AutoCAD Visual LISP / AutoLISP :: Defining A Grid Of Points With Polar Coordinates
Jun 20, 2011I'm trying to define a grid based on polar coordinates.
Can be produced using the following MATLAB
n=1:50000;r=sqrt(n);t=360/((sqrt(5)+1)/2)+1)*pi/180*n;plot(r.*cos(t),r.*sin(t),'o')
I need to insert points based on the polar coordinates defined by the equations. I knew a little bit of LISP 10 Years ago, now it's a total blank. I've been trying to write a script to make this work but after 5 days I'm still without sucess.
Photoshop :: CS6 / View > Show > Selection Edges Option Appears Disabled?
Jan 31, 2013I use PS CS6 for Windows. When I select a layer by mean of Ctrl-Click on layers palette, selection edges is not shown. When I go to menu View > Show > Selection Edges i realize that option is disabled.
View 2 Replies View RelatedAutoCAD Inventor :: How To Change File Check In / Out Status (option Is Disabled / Greyed)
Feb 15, 2012I am trying to use a shared project with my other colleagues. Problem we are having that we are not getting into how to change the File Check in/out Status (option is disabled/greyed) . Do we required administrative rights to do that?
Note: We don't have vault.
Photoshop :: 3D Functionality Is Currently Disabled Due To OpenGL Being Disabled
Nov 6, 2013I opened a file I had been working on yesterday on a different Mac, and got the error message: "3D functionality is currently disabled due to OpenGL being disabled." I am currently using MacBook Pro (2008), running Mac OS 10.9, using PhotoShop CC. I've already looked at Ps Preferences>Performance and I see this.
View 15 Replies View RelatedAutoCAD Civil 3D :: Translate Point Coordinates From Paperspace To World Coordinates In Modelspace
Jun 18, 2012i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
AutoCad :: Converting Northing And Easting Meters Coordinates To Map Coordinates
Aug 21, 2013I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedRevit :: Coordinates To Real World Projection Coordinates?
Aug 15, 2012The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
Photoshop :: Polar Panorama
Oct 15, 2007how this was done?
View 3 Replies View RelatedPhotoshop Elements :: Where To Find Feather Option And Smooth / Refine Edges Option In Adobe E7
Sep 19, 2012Where can I find feather option and smooth/refine edges option in Adobe Element 7.
View 1 Replies View RelatedPhotoshop :: Layer Blending Option Mess With Other Layers Option
Oct 2, 2011As you might see in layer panel. there is a blending option applying on text. and when i try to applying new blending option i-e drop shadow or inner shadow to layer shape 5. it will mess with also to text layer.
View 6 Replies View RelatedAutoCad 2D :: Use Polar When Using Snap From Command?
Jan 13, 2012I've got the very basics down on autocad 2012 but was just wondering if you can use the polar command while using snap from, like for example if i want to draw a circle 180mm from another point at 45deg (@180<45)
View 6 Replies View RelatedAutoCad :: Polar Tracking Not Working
May 5, 2009I'm working in Autocad 2009 full, I've "polar tracking" ON, "Object snap", as well as "Object snap tracking" but still my polar tracking doesn't work. How to resolve this problem?
View 9 Replies View RelatedAutoCad :: Polar Tracking Preset Are All At Zero Now?
Sep 29, 2011All my polar tracking options are turned to Zero.
strangly enough its does give me one tracking option (read line) wile drawing at 5°
and when i draw a square it seems like my plane is off a bit (prolly 5°, looks like a perspective)
Tried fiddling around with the DSETTINGS command but nothing goes.
so i s my plane off, UCS off, also i get sometimes 1 out of 10 times an innorect SNAP ( snap to a point and its off by a 0,x margin. i
Photoshop :: CS6 3D Disabled
Dec 29, 2012Yesterday I signed up for Adobe Creative Cloud and delightedly started exploring the 3D features in Photoshop CS6. It worked perfectly well and there were no crashes.
This morning the Adobe Application Manager said there was an upgrade for Photoshop CS6 with "New Features". While it was downloading I watched some 3D tutorials. Then when I opened a file in Photoshop with the intention of putting what I'd learned into practice, I got the following message:
"Photoshop has detected graphics hardware that is not officially supported for 3D, and has temporarily disabled 3D functionality. Updating the driver of your graphics card may resolve the issue.
Check the manufacturer's website for the latest software."
I have an iMac with an NVIDIA geforce 9400 256mb graphics card. It therefore cannot be upgraded as it is built-in, nor is there any sign of updated software either from Apple nor NVIDIA. So this is my introduction to the Adobe Creative Cloud. Something works for one day and then is "upgraded" and ceases to do so!
AutoCAD 2013 :: Polar Array Of A Circle
Dec 5, 2012I am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 Replies View RelatedAutoCAD Inventor :: Polar Equation Input
Sep 24, 2012I need to put in the polar equation r=e^theta. Is this even possible in autodesk? How can I do it? Should I spline through points instead?
View 4 Replies View RelatedAutoCAD 2013 :: Change Toggle Polar On / Off
Dec 12, 2013I am looking for a way to change the toggle polar On/Off from F10 to F6. I already did it with the "delete" and the "Ortho" keys but i can't find the macro for the toggle polar on/off.
Has you can see on the picture for Delete it's ^C^C erase;
For ortho it's ^O
Maybe for Polar it's ^P but i could validate with you before i do any changes. (;
AutoCAD 2010 :: Polar Array Function
Jul 2, 2013I have drawn a bar counter in 3d which has a top rectangular shape with curved corners. The front of the bar has 100mm wide wooden fascia panels and they need to follow the line of the bar. I am using the Polar Array function which works great except I cant seem to get the panels to follow the curves/arcs around the corners, but they sit neatly on all the straight edges of the bar. So in other words the panels are straight and lined up on the straight parts of the bar but the panels stay at 90 degrees instead of following the curved areas of the bar.
View 1 Replies View RelatedAutoCad 3D :: Edit Holes In Polar Array?
Dec 13, 2012I put the three holes in the outer ears/lugs with a Polar Array and want to change their diameter to make them smaller. If try to use Delete Faces to remove the holes it drastically effects one of the other lugs.
Is there a better way to edit holes in an array and is there a way to make arrays non-associative after the fact of creating them? The dwg is saved in 2007 but created with 2013
AutoCad :: Trimming Polar Arrayed Rectangle
Aug 4, 2012I drew the polar arrayed rectangle as attached and tried to trim the inside lines to create an octagon but i cant trim the object.
However, if i try the same thing without polar arraying ( i.e just by drawing the two rectangles similarly) it works. I would like to know what might be causing this.
AutoCad :: Polar Stretching In Dynamic Block
Feb 25, 2011I use autocad 2011 LT and I have some problem with polar stretching!I have to get from A(see picture) to B but C is always happening! I want to put in an angle in te propertieswindow so that I become B. the angle is variable but the middle stays the same length!
View 4 Replies View RelatedAutoCad :: Sequence For Creating Polar Array?
Apr 19, 2013sequence for creating a Polar Array? I have no problem with Rectangular Array but for some reason I have no success with Polar. include what it should say in the command line in the sequence. I am looking to place 22 .1" circles around a 1.5" circle. I am using v2000 if it matters, however I can use v2007 if need be.
View 8 Replies View RelatedAutoCad :: Polar And Linear Stretch Don't Work Together?
Jul 31, 2011Polar Stretch and Linear Stretch work properly independently, but when their "grip points" are overlayed and I'm trying to stretch the right side and stretch and rotate the bottom side of the drawing - Polar Stretch is screwing up.
The idea is to NOT to use them separately, but with one stroke having "grip points" overlayed all the time.
Photoshop :: Save For Web Disabled In CC?
Sep 14, 2013I had a problem with the Save for Web feature being disabled and just wanted to share the solution that I found. First, to describe the problem: Save for Web was grayed out and nothing I tried could get it back. It wasn't a problem with the image color mode, bit depth or anything like that. Rebooting my Windows 7 PC did not work.
Deleting my preferences did not work. Ultimately, what I had to do was uninstall/reinstall Photoshop CC. Now, it's working fine again.
Photoshop :: 3D Features Disabled
Sep 21, 2013I am interested in finding out how to enable Graphics features in Photoshop CC. I am using Windows 7, with Intel G41 chipset and even though the box is checked next to "Graphics Accelerator", I still cannot use the 3D features.
View 1 Replies View RelatedPhotoshop :: Save For Web Disabled
Sep 29, 2013all of a sudden my Save for Web is disabled in Photoshop CC for all files, including files that I have sliced and saved for web before. I have tried restarting to no avail.
View 1 Replies View RelatedPhotoshop :: CC - Save For Web Disabled
Oct 11, 2013I have photoshop cc and has been disabled "web save" get it working again?
View 6 Replies View RelatedPhotoshop :: Contract Disabled
Jan 2, 2009why can't I contract from the edge of my document in CS4? this worked fine in CS3... I use this method a lot for making 1px borders
Select All
Select > Modify > Contract (1px) done...
but in CS4 if the selection is touching all 4 corners this option is disabled!?!? or any corner that it is touching won't contract... help!