I opened an old file, probably from photoshop 7 or something, where I was using 'warp text' - just a simple 6 degree arc. Now, in CS4, I attempt to change the text written, or make any changes at all to the type, and the font becomes distorted. It doesn't matter what font, and it does it from scratch as well as editing existing warped text. Did my warp feature become corrupted somehow?
View 11 Replieshow to distort some lines of text. I have a 3D-looking image. It's a box where the top surface appears to get smaller as it moves back. I am trying to draw a bounding box on the top surface, and then distort the bounding box so that my text will appear to have the proper perspective. However, I cannot access the distort command under "edit" after I've drawn the box or when there is type in the box. All I can is distort the type. But this won't allow me to properly match the perspective. I need to somehow distort the bounding box (independently control all four corners) and then have the type size accordingly.
View 1 Replies View RelatedI am trying to use the warp text tool to create an arch with my text. However, when I make my arch, the font becomes very distorted and I cannot figure out why. By distorted, I mean the font is not holding it's true shape while making the arch.
View 1 Replies View RelatedI'm trying to warp the shadow of some text for a logo much like the image attached. I can't figure it out at the moment, as when I use the warp tool it's changes the actual text.
I would like to keep the actual text as normal and then warp it's shadow.
When I use the 3D tools in PS CS6, the render is 'warping' the clean lines in an odd manner.Notice the curves on the C and O are getting points and straight lines in the top left corners? And the inside of the O is showing some strange distortion.
View 2 Replies View RelatedIf you have a text layer on the Video timeline in PS CS6, there is an option to use key frames with Text Warp. Unfortunately, unlike other key framed animations, the change from one warp state to another is not gradual. It simply jumps from one warp selection at one key frame to another warp selection at the next key frame. Converting it to a Smart Object removes the Warp Text animation option but retains the animation.
Is this behavior by design?
I am trying to make warp text like this picture. But when I do "warp text" it never comes out like that. I try the different "lower and upper arc), my text becomes a little rounded at the bottom (its suppose to be straight). Is there a special to create this type of warp text?
View 4 Replies View Relatedbending text around the outside of a circle. The arc command under warp text doesnt quite arc it as much as I want it to. Is there another way to arc/bend text?
View 9 Replies View Relatedhow can I make my font look round like this one,
View 9 Replies View RelatedSo I have text that I would like warp in an Arc. I will be cutting this on a plotter. WHen I use the envelope distort the envelope blocks my text in outline mode. If I go to Effect>Arc the warp only occurs in preview but the outlines do not change as the plotter would see it.
I'm sure there is some way to warp text into an arc and have the outlines remain visible and warped for the plottter to cut, no?
How to do a text warp like the top of a class ring similar to this image.
I have tried to work with the mesh envelope tool, but the letters get all distorted and don't run evenly around the corner. I can't seem to get a nice consistent look like this.
I have read illustrator js doc many time but could not find any function that is responsible for ARC the text like.
Warp options in illustrator object->Envolop Distort -> Make with Warp.
I am completely new in PSP X6. I am watching all possible videos in youtube, but after user curve effect on my txt, I can't simply select to edit it.
View 1 Replies View RelatedI was working on a project and I had recently installed a new font. Now all of a sudden whenever I make a new text box and type some text in nothing shows up. I can only see a tiny black line which isn't even text, even tho its set to 36ft. I changed the font and size to see if it made a difference, and nothing worked. I restarted PS and my computer several times, and still the same thing...
View 4 Replies View RelatedI need to resize an image that is 1600 pixels by 1200 pixels to 198 by 286.
How do I do this without distorting the image?
I've found that photoshop is distorting the image when resizing. If you have an image and you duplicate the layer, then with the bottom layer set its size (by free transform) to 99% (width and height), then set the top layers opacity to 50%, the image should be evenly blurred but it's not. It is in focus in the middle and blurred around the edges.
View 2 Replies View RelatedI have a graphic which I need to distort to follow the shape of a pen. I have tried wrapping it but it begins to mess with the flow of the type. I have CS6 Extended and am trying to come up with a solution that works. I need the graphic itself shaped and on its own layer, not applied to a created cylinder. Attached is a simple example of what I am trying to do. I am very knowledgeable in Photoshop but Extended is new to me.
View 5 Replies View RelatedI've found that photoshop is distorting the image when resizing. If you have an image and you duplicate the layer, then with the bottom layer set its size (by free transform) to 99% (width and height), then set the top layers opacity to 50%, the image should be evenly blurred but it's not. It is in focus in the middle and blurred around the edges.
View 32 Replies View RelatedI have been shooting several images of architectural interiors and stitching them together and the attached image is the result I get. I would like to be able to distort, or stretch the center of the image up and down without effecting the left and right ends of the image.
View 9 Replies View RelatedI have a photoshop file and the dominant color is blue, however then I am saving it as gif or jpg, the blue turns in to purple I am not sure why, I've checked all the settings and I am not sure what is causing it, see attachments for clarity, blue.jpg is what the photoshop file looks like purple.jpg is what it looks like then saved as jpg,
View 2 Replies View RelatedAny way I can distort a path in Illustrator like in PS. You know I must accept the changes I made. In Photoshop, I allowed to move this 4 points before I press the check button. But in Illy only 1 point can move and it will automatically accepted it.
View 9 Replies View Relatedthe top image is printed from Adobe Photoshop CS 5.1 57" wide and 137" tall to an HP DesignJet Z6200PS 60" color inkjet plotter. The print preview shows that the image looks good and should come out correctly (as the lower image did when printed to a DesignJet Z6200PS as a .PDF file from Adobe Acrobat Reader).
Why is the image printing correctly as a .PDF from Acrobat Reader but not as a JPEG from Photoshop CS 5.1 (same source image)?
Let me first say that I love using clipping path jpegs made in Photoshop. They can be used in InDesign of course, batched and converted to other formats which need transparency, and so on... The one irritating part is that there's no easy way to distort or scale the clipping path and image together after the file has been created, or at least not that I'm aware of.
For example, I'm working on a piece of furniture which already contains a clipping path, but the client wants the image straightened (or, the perspective from the camera removed, which I don't like actually). So, is there an easier/faster way to do this instead of having to first distort the image, then manually try to line up the clipping path, or worse, remake the clipping path?
Gimp 2.6.8 on Linux openSUSE 11.3
I need to extract text and font from a text layer. No problem, I thought, with gimp-text-layer-get-text and gimp-text-layer-get-font.
But I find that the original text layer was cropped withplug-in-autocrop-layer. Nevertheless Gimp lets me edit the text with the text edit tool - after a confirmation dialog.
But I can't get the text with script-fu. Is there a way to manage it? There are many files involved.
It was a picture and text was on top...and the picture was now on top of the text.
Holding the Option Key...Click?
to create the kind of text.
im basicly trying to recreate the halloween bash style for some work of my own, but i cant cant find a way.
ive tried different fonts, text effects, word wrapping etc but i just cant seem to do it. unless this is made using another program.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedVery difficult to change a font in Photoshop CS6: I select the font then go to the dropdown (either the side panel or the options panel at top; same results) and BEGIN TO scroll down to find the font I want to change to. After a couple seconds, the list pops back up to the top. Usually I cannot scroll past the fonts beginning with M or N before it overrides my scrolling and pops back to the top again, If I can select quickly, I can sometimes nab a different font that starts with a B or C, but hardly ever one I am seeking.
View 3 Replies View RelatedHow do I figure out what font is used on text layer on a .psd? I thought highlighting the text or selecting the layer would show me the font used, but it doesn't seem to work that way. Is there an info option or something that can give me this info?
View 3 Replies View Relatedwhen I try to add or edit text (in this case, as the screenshot shows, Franklin Gothic Heavy)-- It always adds a 'slight' italicized format to the text.
As you can see, the 'font style' drop down menu is greyed out.
I am currently using PhotoShop CS3 and having some trouble with a font. I had made a text/pic about 2 years ago and i wanted to go back and rename the actual text or make a new one with the same font.
However i can not find the same font i had used. Is there anyway to get the same font again maybe a trick or something? Heres a picture of what it looked like...