When I use the 3D tools in PS CS6, the render is 'warping' the clean lines in an odd manner.Notice the curves on the C and O are getting points and straight lines in the top left corners? And the inside of the O is showing some strange distortion.
View 2 RepliesI pasted a vector object into PS CS6 (13.0.1 x32) today directly from Illustrator CS6 (16.0.1 x32), and selected "Paste as Smart Object" (Windows XP Pro SP3).
I then tried to warp the pasted object using the Free Transform tool by dragging one of the corner handles with CTRL held down (Windows).
This usually warpsdistorts the object, but instead, this launched a skew operation.
If I paste as Shape Layer or as Pixels then apply Free Transform, <Ctrl + corner handle drag> performs a warpdistort operation. Also, if I rasterise the pasted AI object, and then convert to a Smart Object I can warpdistort.
Is it not possible to paste an Illustrator vector in as a Smart Object, and then warpdistort it directly using this technique?
I am trying to use the warp text tool to create an arch with my text. However, when I make my arch, the font becomes very distorted and I cannot figure out why. By distorted, I mean the font is not holding it's true shape while making the arch.
View 1 Replies View RelatedI'm trying to warp the shadow of some text for a logo much like the image attached. I can't figure it out at the moment, as when I use the warp tool it's changes the actual text.
I would like to keep the actual text as normal and then warp it's shadow.
If you have a text layer on the Video timeline in PS CS6, there is an option to use key frames with Text Warp. Unfortunately, unlike other key framed animations, the change from one warp state to another is not gradual. It simply jumps from one warp selection at one key frame to another warp selection at the next key frame. Converting it to a Smart Object removes the Warp Text animation option but retains the animation.
Is this behavior by design?
I am trying to make warp text like this picture. But when I do "warp text" it never comes out like that. I try the different "lower and upper arc), my text becomes a little rounded at the bottom (its suppose to be straight). Is there a special to create this type of warp text?
View 4 Replies View Relatedbending text around the outside of a circle. The arc command under warp text doesnt quite arc it as much as I want it to. Is there another way to arc/bend text?
View 9 Replies View Relatedhow can I make my font look round like this one,
View 9 Replies View RelatedI opened an old file, probably from photoshop 7 or something, where I was using 'warp text' - just a simple 6 degree arc. Now, in CS4, I attempt to change the text written, or make any changes at all to the type, and the font becomes distorted. It doesn't matter what font, and it does it from scratch as well as editing existing warped text. Did my warp feature become corrupted somehow?
View 11 Replies View RelatedSo I have text that I would like warp in an Arc. I will be cutting this on a plotter. WHen I use the envelope distort the envelope blocks my text in outline mode. If I go to Effect>Arc the warp only occurs in preview but the outlines do not change as the plotter would see it.
I'm sure there is some way to warp text into an arc and have the outlines remain visible and warped for the plottter to cut, no?
How to do a text warp like the top of a class ring similar to this image.
I have tried to work with the mesh envelope tool, but the letters get all distorted and don't run evenly around the corner. I can't seem to get a nice consistent look like this.
I have read illustrator js doc many time but could not find any function that is responsible for ARC the text like.
Warp options in illustrator object->Envolop Distort -> Make with Warp.
I am completely new in PSP X6. I am watching all possible videos in youtube, but after user curve effect on my txt, I can't simply select to edit it.
View 1 Replies View RelatedIn a layout for an ebook I have some important black and white bitmap illustrations in tiff., 300 dpi. These have appeared ok on print, but on screen, reading the same pdf-file, they're unacceptable, especially some texts in fontsize 5-6 pt are unclear. I have to convert the drawings, or at least the texts, to vector graphics. Can I open these tiff.s in Photoshop, change only the texts to vector graphics and then save in a format, that can be inserted in the Word2010 layout?
View 2 Replies View RelatedIs there any way to convert simple text to vector text in photoshop ?
View 4 Replies View RelatedHi, I have this huge problem where I can make everything look great in photoshop (as great as i can and that I want it to look, lol) but.....text always blurs and looks horrible.
I thought since photoshop 6.0 they added vector graphics/text to fix this problem...but...how do i type in Vector instead of raster?
And this is during working to that it looks bad. Not just after saving, so its not a quality issue.
I am using CS2 and need to create an effect as vector. I am trying to get a ribbon-like object to appear to weave between letters. I know that if I rasterize the layers and make dups.
View 18 Replies View RelatedI'm trying to File > Save As an Adobe Photoshop CS6 PDF and then be able to open it and edit the text in Adobe Acrobat X. Whenever I attempt to edit the text it is a raster image and it doesnt matter what I do in the photoshop pdf settings.
I want to be able to do this so that the text is able to be searched by google / search engines when I make the PDF available online.
I am trying to make a text layer in photoshop and convert to a smart vector object, but it only gives me an option to convert to smart object, as opposed to vector smart object. The bad point about this is that the text becomes rasterised when exported to EPS or PDF (same with vector shapes within a smart object), unlike a regular vector layers which output correctly.
Is there anything i'm missing out on, or do I have to revert to importing all text from illustrator and set up my smart vectors like that?
Anyone know of a way to subtract text from an existing vector mask? I currently have a solid area of vector mask, and I want to make letter-shaped transparencies in it...
View 3 Replies View RelatedAny one know how to convert text into vector shapes in Pshop. I'd like to do this without interfacing with Illustrator, as that is what I do now. I'd like to take Illustrator out of the equation.
View 3 Replies View RelatedI use photoshop 3.0 and am familiar with basic functions, but now i need to create a vector image - this is for uploading to a t shirt design web site. The writing needs to be in Russian, which i have successfully cut and pasted into photoshop.
View 3 Replies View RelatedI have tried to no avail but how on earth do i shape a word into this shape. with the straight line on the top and pointed on the bottom. trying to convert this to vector.
View 6 Replies View RelatedIf i have a text layer manipulated in photoshop. how can i save it as vector image to import in swift 3d
when i choose export to eps and import in swift 3d it give me an error massege that the file does not contain outline or filled shapes
how can i change the text in phtoshop to vector shape.
We know that vector shapes, paths, text etc are independant of resolution and can be printed while maintaining the vector lines. So why when we zoom in do we see jagged pixels? Is it just a screen viewing thing??
View 6 Replies View RelatedUsing Photoshop CS2, when I open files with text layers (also created in CS2, just a few minutes earlier) I get a message: "Some text layers might need to be updated before they can be used for Vector output. . ."
I'm new to Photoshop and am wondering what this means and why it's happening? Is it normal?
When I put text into photoshop CS3, and then zoom into it, the edges are all fuzzy and jaggy.
I was of the opinion that all text were vectors in PS and so the edges should be smooth as. Unfortunately, the text prints out all jaggedy on my laser printer also just like it looks on the screen. I've also played with the anti-alias options somewhat. Obviously when I do this in Illustrator, it is spot on vector, but not in PS.
What am I doing wrong here? When I convert the text into a shape, sure... the nice vector lines appear around text. But shouldn't the text be vector straight up when I create a text layer in PS, and then I should be able to rasterize it when adding filter effects etc?
Is there any way for me to work with my text in Photoshop in sharp vector-resolution so that it's sharp at all resolutions? Let me describe a test I've done:
I open up a A4 300 ppi resolution document in Photoshop and simply type the word "Photoshop" at 72pt size Myriad Pro font. The anti-aliasing is set to 'Crisp'. Firstly, it doesn't look the best as it is on the screen with the edges 'jaggy'. Secondly, I hit print and it tells me I'm printing to a non-postscript printer (i.e my laser which I know IS postscript!!). When it prints out, it looks crap just like it did on my screen (edges jaggy).
I then open up a simple A4 document in Illustrator, type the word "Photoshop" at the same size text as outlined above. Looks great on screen OBVIOUSLY because it's vector-based and is sharp at all resolutions. I hit print, it it spits out the document perfectly printed as it is on screen.
I don't know if anyone else is experiencing this with Photoshop, but my text looks garbage only when using Photoshop. Not with any other program out there (ie. MS Word, Publisher, Illustrator, Serif Drawplus, Serif Pageplus, Serif Photoplus....)
I have five PSDs I want to make into one 5-page PDF.
I want the text to stay vector/selectable in the PDF (and not rasterized during the conversion process). Is there any way to do this?
I was designing a business card as usual and copying some vector images from Illustrator, but when I tried to enter some text it came up blank...the color shows a question mark (?) even after I attempt to change the color.
I've seen the question mark before but all I needed to do in the past was select that little button and change it.
I am making myself a logo in photoshop. I have made all the letters that will be used, but they are all seperate entities as most of you who have used vectors know. I would like to interconnect the letters, as well as an angel I have made to go above the letters. My question is, how can I join two seperate vector images into one vector image. For example, joining a letter E with a letter D. I wonder if theres a way to do this without having to delete part of each image and then re-draw, which is a pain. Sorry if this isn't really clear, but its hard to explain.
View 4 Replies View RelatedIs this possible? I'm in Windows, Photoshop 7.0. I also have a pretty early version of Illustrator, not sure which one.
View 3 Replies View Related