Photoshop :: Variable Data Printing

Apr 25, 2008

I work with a lot of variable data printing and data driven graphics. A lot of the time I lean on third party plugins and extensions for this kind of work.

Illustrator, Photoshop and Indesign all support variables and variable data printing natively nowadays. However its implementation is fairly limited compared to some of the afore mentioned thirdparty plugins and extensions.

One thing in particular that bothers me with the native controls is text overflow. Native variable support in these apps doesn't seem to be able to handle or resize text in the case of text overflow. Has anyone dealt with VDP, overcome this problem or have some insight.

View 8 Replies


ADVERTISEMENT

Photoshop :: Variable Printing With Pictures?

Oct 15, 2012

I know Photoshop can handle variables in text format so for example and that you can set a variable to be an image that'll change with alternate images but can Photoshop use a mix of the two to create images with variable fields for text?
 
Heres some examples:
 
These have been done in Directsmile (not by me) which after playing with the demo lets you import image sets of all the letters and it then uses those to make up the variable data for each print imported as a CSV file. They're not text with filters applied, they are tiffs with masks:
 
Now Directsmile obviously does all this, but seeings as Im paying for Photoshop CS6, I wondered if it could handle it?. If not Ill have to focus on Directsmile, even though it is PC only

View 3 Replies View Related

CorelDRAW X4 :: Plugin Variable Data Print System

Jan 15, 2009

I have a question if there is some kind of plug in for Coreldraw to easy make personalized printing?

For example Kodak calls it Variable Data Print System and you can easy starts personalizing your bussiness cards.

Is there some kind of plug in aviable?

View 5 Replies View Related

AutoCAD Inventor :: Variable IProperty Data On Placed Components In Assembly

Apr 15, 2013

I want to create numerous custom properties for a part. Some of these will be the same for all instances of the part (i.e. vendor, part number, etc).  But some have to vary from instance to instance.

So, as an example - if I place 5 identical tanks into my assembly I need to assign unique text entries for each of these 5 instances (i.e. TANK-01, TANK-02, TANK-03, etc)

Furthermore, all these textual properties have to be able to be shown physically on the part (for identification on plots) and extractable for BOMs, etc. It seems that any custom i Properties I set up are global for all instances of the part.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Variable Data / Merge File Stacked Text

Sep 7, 2012

I am attempting to create a tag system that will have a 5 digit number but must be printed as shown below

1

2

3

4

5

We have to create a file to be engraved that has 2000 consecutive numbers and we cannot figure out how to make them appear stacked using the merge feature.

View 4 Replies View Related

CorelDRAW Graphics Suite 12 :: Data In Buffer 1 GRC-50 Not Printing?

Sep 23, 2011

I tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.

View 2 Replies View Related

GIMP :: Unbound Variable Error With No Variable?

Nov 5, 2013

I'm attempting to write a batch script to add some layers to a pre-existing image and save a copy. I've gone through the tutorial, and have run the demo code from Basic_Batch with no errors, but my (what I think of as simple) script throws an "Error: eval: unbound variable: ?" It also seems to cascade the error to other scripts, as I then get "unmatched parentheses: 2" errors from what I assume to be the script immediately following my own during Script-Fu load. This occurs whether running from batch or clicking "Refresh Scripts" from the Script-Fu menu.

What I could find on this forum and Google suggests that I may be required to 'define' one or more of my variables before using it, but for the life of me, I can't figure out which one that would be, and the error (reporting that '?' is undefined!?) I've quintuply (probably more ~_^) checked my parenthesis matching, but they look fine to me.

In case this was an encoding issue, I've tried saving my .scm file as both UTF-8 and ANSI. I should also note that I'm running Windows 7 x64 in English-US.

Script:

(define (script-fu-build-imagebasefilemytext)(let*((image (car (gimp-file-load RUN-NONINTERACTIVE basefile basefile)))(drawable (car (gimp-image-get-active-layer image)))(title (car (gimp-text-layer-new image mytext "Courier" 18 UNIT-POINT))))(gimp-image-add-layer image title -1)(gimp-image-clean-all image)(gimp-file-save RUN-NONINTERACTIVE image drawable "K:\\Images\\Temp.gif" "Temp.gif")));

Since I intend for this script to only be run from batch, I haven't bothered including the typical register stuff.

View 6 Replies View Related

AutoCAD Print / Plot :: Data Table Text Not Printing?

Oct 10, 2012

I have a table which is linked to a datalink from Excel. The table and contents (text) show up in paperspace; however, only the table frame shows up within the plot preview, or when I try to plot it. The text does not show up.

View 4 Replies View Related

AutoCAD Map 3D :: Poor Quality When Printing Raster Image Connected Through Data Connect

Aug 19, 2011

I am using two different types of raster ECW and MrSid. ECW file resolution goes way down when plotting. They look like blocks. MrSid files look fuzzy but alot better than ECWs. I've tried RASTERTHRESHOLD, and RASTERPERCENT. Both are set to 90. Using HP6100ps.

Images are fine when using Imageinsert.

Is there a setting i'm missing somewhere for them?

View 3 Replies View Related

Photoshop :: Make Composite Image From Layer Data Instead From Merged Data Section?

Jun 1, 2013

I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.

View 1 Replies View Related

Photoshop :: Tile Printing With High Resolution Printing?

Oct 2, 2006

i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.

i really need to be able to tile print this in high resolution on film. anyone know what i can do??

View 1 Replies View Related

AutoCAD Civil 3D :: Combining Feature Data (Adding Data To Shape File)

Apr 24, 2012

I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.

Ultimately I will use the information to do a map query and find out spatially where i need new water meters.

Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.

I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?

Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?

Note: I am running c3d 2012 on a  Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go. 

View 3 Replies View Related

AutoCAD Civil 3D :: Use FDO Data To Populate Custom Data Field Expression

Apr 10, 2013

say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.

when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.

lets say you print an fdo map label showing, say, the id_no, provided in the shape file.  Then in your custom parcel properties for id_no you type that in.

is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?

View 4 Replies View Related

AutoCAD Civil 3D :: Data Shortcuts Transferring Super Elevation Data

Jun 7, 2012

I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut.  I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed.  Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.

I pulled cross sections and it appears is has no clue there is any super elevation data.  Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing.  Data shortcuts are pretty much useless to me if super elevation data doesn't transfer. 

64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional

View 2 Replies View Related

AutoCad :: Performing Data Extraction And Linking To External Data With Formulas

Apr 19, 2012

I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.

View 2 Replies View Related

InDesign :: Events Or Attributes Triggered By Data Coming From Data File?

Mar 1, 2014

Without using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?

View 9 Replies View Related

AutoCAD Civil 3D :: Missing Data From Profile View Vertical Geometry Data Bands?

Sep 9, 2011

i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.

View 4 Replies View Related

AutoCAD Civil 3D :: Data Panel Is Missing / Data Connect Route Doesn't Work

May 3, 2013

I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues. 

1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes" 

2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.

View 1 Replies View Related

AutoCAD 2013 :: Embed Data In Table So That User Can Select From Group Of Data Within One Cell?

Oct 24, 2013

Is it possible to embedd data in a table so that a user can select from a group of data within one cell?

I use this technique quite often in Excel.  One cell in a table can have various values: A, B, C, or D.  While another cell can have a different set of values to choose from:  BLUE, RED, ORANGE, or PURPLE.  The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.

View 2 Replies View Related

AutoCAD Inventor :: Unwanted Data In Design Data Folder

Oct 12, 2011

I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...

I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.

What about the Optimisation, DXF-DWG.  I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.

View 1 Replies View Related

AutoCAD Map 3D :: Import Point Data With Object Data?

Jan 20, 2011

how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".

Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable. 

I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.

I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.

I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.

Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?

C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12

View 9 Replies View Related

AutoCAD Map 3D :: Adding Data To A Feature Data Table?

Jan 20, 2012

Is it possible to add data to a feature data table?  Example: The shape file data downloaded from NRCS only has the Soil number for the State.  As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.

View 2 Replies View Related

AutoCAD Map 3D :: Transfer Link Data To Object Data?

Mar 28, 2013

I have a drawing with Objects that have both Object Data and Linked data in an Access database. I need to get information from the linked table to a new linked table for each object.

I have thought that if I get the necessary information from the Linked table record to the object data for each object, I could then convert the Object data to a new link and am looking for a way to copy the data from a field in the Linked Table to the object data.  There is at least one field common to both the OD and Linked Table record.

Is there any automated way to transfer this data?

View 5 Replies View Related

AutoCAD LT :: Transfer Link Data To Object Data

Jun 25, 2013

In my company, they have just upgraded the old version of Autocad LT 2004 to the new 2013 and we have created menu to make our job easy. I have try to transfer the menu file .mnc to 2013 but it's not working or I don't do it the right way.

View 4 Replies View Related

AutoCad :: Object Data To Attribute Data To Perfection?

Oct 15, 2010

I'm working in AutoCAD Map 3D 2008 and Autocad Civil 3D 2009.

The General Task:I want to convert the object data to attribute data so that I can export it to an Excel file, add another column of data, and then import that new data as attribute data.

The Specific Task:I have thousands of campus water meter locations (a block with a small icon, attribute data, and object data) that belong to two different systems, domestic water and lake water. Each of these blocks has object data item (a barcode tag) that I want to show as a label next to the block.

However, before I do that, I want to export that barcode data to an excel file so I add a column (eventually a new piece of attribute data) that says whether or not that specific water meter is radio read or manually read. I want to then import that radio read/manual read excel file back into autocad and have an X appear on the block icon if it is radio read. I also want the barcode information to show up as a label.

My problem:I can't get the barcode object data to export with the locations in one easy excel sheet that I can simply import after I have made my changes.

Find some person on here who knows how to convert object data to attribute data.

View 9 Replies View Related

InDesign :: Data Jumbled And Repeating In Data Merge?

Feb 1, 2013

I'm creating a catalog, using data merge in InDesign CS5.5 for the first time. I'm using dummy data to start, naming the products with a naming convention Product 1, Product 2, etc.
 
Everything seemed to be working, but then I noticed that the merge is all jumbled, such as:

Page 1 has Product 15 repeated, with the product description, price and other information from product 6. This repeats five times down the first page.Page 2 starts with Product name, price and number for Product 7, but the description for product 6. Continuing on page 2, everything seems one off. Product names mixed with data from the next product. Page 3-15 are the same as page 1, all Product 15 with the description for Product 6.  

In short, this is very weird. I am saving the data in a CSV comma deliminated (also tried text with tab delineations.) I don't think there are any text breaks in the data, nor blanks. The odd thing is also that the preview looks perfect before I merge the document.
 
Here's Page 1:

Here's page 2:

By the way, all numbers (except pupil price) relay the product number. For example, Product 1 has a price of $1.00, an item number of H1, and the description "This is product 1".

View 9 Replies View Related

Lightroom :: Convert Colour Profile Of Custom Printing Package From Pro Photo To SRGB Before Printing

Oct 30, 2012

How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.

View 1 Replies View Related

Photoshop :: Variable Monitor Profile Support

May 27, 2009

Although the following is usually discussed in conjunction with Multiple Monitors, I believe it may be relevant in some single monitor environments as well.As far as I can see, PS CS4 uses the Windows XP Default monitor profile (Display Properties > Settings > Advanced > Color Management) as its Monitor Profile (just to be complete here, in the absence of any entries under Color Management, PS uses the sRGB space as the Monitor Profile). I have not been able to find any other way to control which monitor profile PS will use.Hardware monitor calibration tools, as well as the Wincolor applet, make it possible to load the LUT on the fly, but neither my Spyder3 Elite software nor Wincolor actually update the Windows Default monitor profile definition. This means that without manually making the change in the Windows Color Management section, there is no way to tell PS to use a particular monitor profile, thus making it impossible to create a correct relationship between the LUT contents and the PS monitor profile.Making the manual change to Windows is not only tedious, but also makes it essential to REMEMBER to do this every time there is a to be profile switch, which may be necessary due to using one's laptop with different external monitors in different locations, or even just different profiles to compensate for varying ambient light conditions (e.g. one profile for natural daylight, another for artificial lighting at night).Contrary to several comments I've encountered in various posts, I am not able to assign a different Default profile to each monitor at the WIndows level. Perhaps this is possible with some video cards/software, but not with my Nvidia GeForce 8400M G and the latest software.

View 8 Replies View Related

Photoshop :: How To Make Variable Width Line

Sep 10, 2007

how to make the line smaller in the start, and wider at the end. With a brush, I can only figure out how to draw with the same thickness all the time..

View 8 Replies View Related

Lightroom :: GPS Data From D-SLR Doesn't Appear In GPS Data Field

Nov 18, 2012

The gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures

View 1 Replies View Related

Photoshop :: Batch Process Single Or Multiple Files Using Variable Effects

Jul 28, 2012

Is it possible to take 3-4 effects, all mixed together, like brush stroke, solarise, warp sharp, neon... mix them all together, and process a number of pictures while changing the mix level of each effect, and also varying some of the effect settings, such as brush size, brightness, etc...

are there any scripts that can do that? any macro plugins that can control other plugins? is there a crafty programming trick that could be fashioned to vary and mix effects across a task of batch processing?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved