I like to create some tire tracks, like the ones Apple had for its iPod advertising month ago… --> white background, tire tracks behind the iPod... (sorry, I didn't find the image)
Basically, I need to align tire tracks to a path. I’d like to have 3 pairs of tracks, 2 are wiggly like a drunken driver would cause, and 1 pair is straight, also on a white background.
How can I make a tire/tyre track running accross my printed page
Do I need to make a brush or?
i want to make a brush or roller or somthing for a specific tire tracks that i need for a project.... but i have now clue where to start?
View 9 Replies View RelatedI recently upgraded from Photoshop Elements 9 to Lightroom 5, When I moved the catalogue over, all keywords transferred, and Albums became collections. When I used Photshop Elements, I could easily sync the Albums with my Apple Tvs to display the pictures, as well as my other Apple Devices. I can not figure out how to export the collections to the Apple devices, especially the Apple TVs. There must be a way given the power of this software.
View 1 Replies View RelatedI've been working on a photo and after painstakingly removing the background (it's transparent now) and finding the perfect background image to put it on, I've run into a problem.
The photo I'm working on is of a person sitting on a motorcycle. The right side of the photo ends half way thru the front tire. Didn't think much about it until I went to paste the photo onto my new background image and realize... with half the front tire missing, I can't center the subject - I have to keep bike to the right so the missing half of the tire is off the edge of the photo.
I am not skilled enough to re-build the missing half of the tire.
base.jpg is the full image on a white background. (I could not figure out how to make the transparent PSD version small enough to upload anywhere.)
tire1, 2, & 3 are pics of the whole tire cropped out of other images of same bike.
tirexx.psd is the tire section of the tranparent psd version of the whole pic. If anyone can rebuild the missing half of the tire, i could just paste it back onto the photo.
how i can make a Tire Tred, as if some one was doing a burn out...
im doing a logo for a friend.
I'm looking for a fast way to remove the lines and little rubber ends on this tire. I would prefer an automated process if possible. I have to do 300.
View 3 Replies View Relatedhow can i re-create the effect in the ipod adverts to a normal photograph?
View 6 Replies View RelatedI work with photos all day long (my feeble attempt to feel better), but when it comes to graphic design elements I'm really at a loss at reverse engineering. I'm not sure if this will work for me, but I'm thinking of creating some navigation buttons that have the look and feel of the iPod buttons.
I've attached a screen capture from the Apple site for your evaluation. I'm assuming a circle filled with white and a slight gradation going across it from white to a very pale blue. The arrow has some sort of emboss setting applied to it. I'm lost on the very thin outer ring. Is this accomplished through an alph channel selection or just a circle within a circle?
how to make that silhouette like the ipod commercials in photoshop.
View 3 Replies View RelatedI want to make an interface like that but I'm not sure what to do in layer options.
View 1 Replies View RelatedYou know those iPod commercials from Apple where you have the character in Black or white against a color background? They're usually dancing and the only distinguishing feature you can make on the character is the outline of the iPod.
way to make these without tracing with the selection tool?
how to achieve an effect like this...ive searched google everywhere and there a plenty of tutorials on ipod commercial effects but none show how to make anything like this.
View 1 Replies View Relatedturn a image into some thing that looks like the iPod TV advert featuring Eminem.
View 2 Replies View RelatedI am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.
I have seen it done but can't recreate it. I have attached an example .
How to make the tire tread texture in the photo link below ? I need a square texture of this type of tire tread to use in a 3D modeling program. I need to map the texture to the mesh of a 3D tire.
Attached Thumbnails
how to recreate the ipod style ads similar to these on the ipop website? [URL] there are tutorials out there but all of them seems to use photoshop and i don't know how to use nor have the patience to learn how to use photoshop since i am already comfortable with PDN....
View 7 Replies View RelatedI've created a model of an iPod Nano fourth gen (wich is no where near perfect). This model has a lock switch as a seperate object. What I'd like to do is make a slider helper object and when I move it, the lock switch gradually goes from locked to unlocked. I don't know how I'd have to make this except for the fact that I'd probably have to use a script controller for the position of the switch and have the script work in the parent's (the iPod body) local coordinate system. But I don't have enough knowledge of MAXscript for that and maybe there's a diffrent approach.
View 3 Replies View RelatedI've been working on a project (original is HD footage) and got a successful render to SD DVD. In trying to render a copy for my ipod i get an added audio problem no matter what ipod setting VSP x3 offers me. It's a background distortion, similar to that of clip that goes in very slow motion and the audio is echoing with reverb. The background noise appears to be in continual " waves".
However, the clip does look excellent otherwise in picture, vocals, musically etc.
I have uploaded an edge animate cc published html with sound. The html file opens perfectly on my mac pro safari browser perfectly with audio. But when I open the same file on my iphone5 the file opens but no the audio does not play.
View 4 Replies View RelatedI have been using Photoshop for about six years and CS3 since it came out, on a 2Gb RAM Dell PC with a Pentium4 3.00GHz. I use a Canon 1Ds mark III so the file sizes are quite large and I have noticed that my PC is slowing down now.
I am considering an Apple iMac with a 24" screen but hear negative comments such as differentiation of shadows and highlights is difficult to judge on the glossy screen, reflections on the glossy screen, and the difficulty of upgrading in a couple of years time as it slows and programmes become more RAM and processor greedy.
The other option for the same money is a Chillblast Fusion Photo which with 1 Ter of hard drive in three ports, 8Gbs RAM and a 24 " DELL HD screen is a formidable combination with future adaptability available.
On the other hand I get fed up with the quirks of a PC system with Microsoft operating system that we are all familiar with, which seems to be avoided with the Apple system. I suppose I could use the new computer with nothing on it other than Photoshop and keep this prsent computer for Windows and Internet use?
My apple-space bar combo for zooming in quickly on a fixed point just doesn't work in CS6 which is more irritating than I would have thought possible. Any simple way of fixing it and/or are Adobe likely to reinstate it with any updates?
View 6 Replies View RelatedI am switching form IBM to Apple. How do I get my Photoshop and Lightroom to work?
View 5 Replies View RelatedIs Photoshop CC compatible with Apple OSX: Mavericks
View 2 Replies View RelatedI'm trying to add a face to an apple so that the face takes on the same contours/shading of the apple (I'm not trying to morph the face with the apple; I'm just trying to add a face on it, possibly like a reflection). I tried using the 'sphere' filter on the face but just couldn't get it to match the apple. Right now it just looks like I layered a flat picture to the apple and lowering the transparency didn't help.
View 2 Replies View RelatedI have Photoshop CS6 on a Windows DVD: How can I install it on an Apple MacBook?
View 7 Replies View Relatedif the issues Photoshop cs6 had with the new retina display has been satisfactorily resolved?
View 10 Replies View RelatedI want the background of the picture and don't spoil the it after removing the words and the apple!
How should I deal with it?
Is Adobe CS 5 compatible with Apple OS X Lion?
View 1 Replies View RelatedAdobe CS3 is still crashing on the iMac (10.6.8 Snow Leopard). For example, it will not process multiple raw (dng) or jpg files from Bridge through Photoshop. I deactivated and reinstalled Adobe CS3 on the iMac. I did save the preferences for Dreamweaver, Bridge, and Photoshop before uninstalling.
Â
I get this message every time and Photoshop freexes and must be Force Quit.io error: general photoshop error occurred. this functionality may not be available in this version of photoshop. - (no additional information available> : 1798
Â
I got Adobe CS3 to work on the MacBook (10.6.8 Snow Leopard) after reinstating it again from the external hard drive and on the new MacBookPro (Apple OS 10.8.4 Mountain Lion).
If your scanner manufacturer does not support scanning in 64-bit mode, or you have issues scanning with TWAIN, you can scan into Photoshop CS6 using Apple’s ImageKit technology, which is built into Photoshop CS6, does not need a plug-in to be installed, and provides access to a large number of scanners.
Â
That doesn't work with my Epson Perfection V350 Photo. I wonder if it actually works with any scanner. With Photoshop CS6 have wiped out many scanners that don't have 64-bit compliant drivers, why doesn't Adobe connect with Apple's Image Capture app? Why doesn't the V350 work with the ImageKit technology alllegedly part of Photoshop CS6?