Photoshop :: "The Command 'Make' Is Not Available"
Jan 3, 2008I've put some downloadable actions on my web site and a person keeps on getting the above message when trying to run them.
The actions were recorded in PS7 and he is using PS7.
ADVERTISEMENT
Photoshop :: Actions: Command Make Currently Unavailable
Jul 11, 2008I see this freqeuently when I play my actions.
Right now all my adjustment layer actions wont work.
Then sometimes it works later. what is this?
GIMP :: Use Command Line To Make New PSD File
Jan 13, 2013How do you write a command line script to create a new 200px by 200px @72dpi psd file?
View 1 Replies View RelatedAutoCAD Inventor :: Make Part Command And Templates?
Jan 11, 2012A workflow that works great for me is to create parts (Make Part command) from a multibody solid. The dialog window presents one with an option to choose other Templates (I have a few), BUT I have to choose the template I want to use EACH time I create a part. That is, Inventor doesn't automatically remember the last Template I chose, it defaults to the Standard.ipt or Standard.iam.
Is it possible to set it so that Inventor remembers what Template I chose the last time so that I don't have to choose it every time I Make Part?
AutoCad :: Make Multiple Point Distance Command?
Oct 8, 2007if its possible to have a command which does a multiple distance? at the moment im drawing a polyline, doing a list on it then deleting it, which is a bit mudane now.
View 9 Replies View RelatedAutoCad :: Make Part Command For Custom Parts?
Oct 31, 2011I have made a large amount of custom parts in a systems furniture drawing I am doing. I made the mistake of putting them all on the same layer and am now realizing i need them to be on separate layers. I tried to just make new layers and then assign the new layers to my custom parts. It acts like it does it but then the parts behave as if they were still on the common layer that i originally created them on. Is there a way to get the custom parts to only be linked to the new layer and not act like they are still on the original layer? My other thought was if i made a new layer, then drew my custom symbol again using that layer... could I then somehow tell my custom part to now use this new symbol that is on the new layer instead of the current symbol that is on the bad layer? I am trying to avoid having to completely start over creating all my parts again because there are at least 30 and I had already put in all of the options, atriubtes, part numbers, pricing, etc... and it would be very time consuming to start that over.
View 6 Replies View RelatedAutoCad :: Make Join Command Work Only On Lines Or Polylines?
Aug 14, 2013I Wonder if it's possible, with a setting or something like this, to make the join command work only on lines or polylines that had the same linetype?
View 3 Replies View RelatedAutoCad 2D :: How To Make White Areas Non-transparent Without Using Hatch Command
Oct 26, 2011I've got a drawing in Acad 2010 which consist of about 6000 lines. The image is a ship, and I need the drawing to insert in a HMI screen.
Now my problem: The accomedation of the ship is white, as is the background of the sheet. I need the drawing with a black background, but want to keep the white color of the accomedation of the ship. When I change the backgroundcolor of the sheet to black, the white areas inside the drawing will also change into black. If I trie to hatch the white areas inside the drawing the program gives a messages that there are to many open bounderies.
I tried to make a blok of the drawing and move it on a black square, but then again the white areas will turn black.
So for short: How can I make the white areas non-transparent without using the hatch-command?????
AutoCAD Visual LISP / AutoLISP :: How To Make Selection Set After Break Command
Nov 19, 2011The following function
(command "_break" ent1 p1 p2)
break a polyline into two separate polylines. How can I get a selection set with two separate polylines?
AutoCAD 2013 :: How To Make Dimension Style Current Like LAYMCUR Command
Jul 9, 2012I am familiar with the LAYMCUR command to select an object and make that layer current. I am hoping there is a command to select text or a dimension and make that style current. I can't fine such a command. I have to select a text, see what style shows up in the box at top, go to the text style box, find the style and make it current. It seems like unneeded steps. It's simple for layers, why not text and dimensions?
View 3 Replies View RelatedAutoCad 3D :: Change Setting To Make Walls And Roof To Being Cut Using Sectionplane Command
Apr 5, 2012I am using AutoCAD Architecture 2012.
I built some walls and a roof slab using the wall, door, and roof slab tools in the build section of the ribbon. I drew a section plane and activated live section. The walls and roof did not cut away and they do not show up when i use the sectionplanetoblock command.
Is there a setting I need to change to make the walls and roof susceptible to being cut using the sectionplane command?
AutoCAD Visual LISP / AutoLISP :: How To Make Ctrl-V Always Paste To Command Line
Dec 17, 2012I rarely paste entities using ctrl-v, I use the WTIT.lsp commands instead, or edit pulldown to paste entities.
I want a CTRL-V to paste to command line, always, no matter what.
I tried killing the keyboard shortcuts through the CUI, but that just stopped ctrl-v from doing anything when I was not on command line.
[URL] ....
AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
AutoCad :: Make Specific Command To Start At Specific Layers
Nov 27, 2013Im using Autocad Structural Detailing 2013. Its is possible to make specific command to start at specific layers?
EX: Breakline ,by default start at "LAYER 88".
Polyline ,by default start at "LAYER 150".
AutoCad :: Drag Command From Command List Pane To Quick Access Toolbar?
Apr 18, 2011AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Annotation Command Set Correct Layer For Duration Of Command
Nov 21, 2010I am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
AutoCAD 2013 :: Get Message Unknown Command When Running Any VBA Command
Jan 4, 2014After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedAutoCAD .NET :: Send Command Executes After Exiting Command Method
Apr 23, 2013I used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedAutoCAD 2013 :: Command Line Appears Again After Plot Command?
May 15, 2012I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
AutoCad :: Command To Save File With Specific Name Using Single Command?
Oct 24, 2011I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View RelatedAutoCAD 2010 :: Command Not Showing Up In Command Line
Nov 27, 2012without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
AutoCad :: Execute Line Command Like A Single Command?
Oct 27, 2013line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedPhotoshop :: How To Put Lines On An Image Make A Picture Glow-or Make Text Look Clear?
Jan 12, 2005I am pretty new to Photoshop and I have come across a few things that I would love to do but I cant figure out how to do them. Also, I have elements so I'm not even sure if I can do them. Anyway one of the things I am trying to learn is how to put lines over an image. For example the very first picture on this site: ...
View 1 Replies View RelatedPhotoshop :: How Do I Make This Texture For A Square Frame And How Do I Make Custom Textures?
Apr 6, 2006I was wondering how I could duplicate the texture of this gear/star thing? I want to use the same texture for a square shaped frame. I already tryed messing with the bevel and emboss layer style but I didnt get a the matching result that I desired.
My next question is how do I make my own custom bevel and emboss layer style textures?
AutoCad :: How To Use Subtract Area Command In Area Command
Feb 1, 2012How can i use subtract area command in area command while using add command , often it happens we click on polyline whose area we did not want to consider. How can i do like this, i re click on that enclosed polyline and the area gets subtracted and the green fill goes away?
View 3 Replies View RelatedCorelDRAW Graphics Suite X4 :: Make Halftones From CDR File To Make Printing Offset Plates?
Apr 3, 2013can i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedPhotoshop :: Make Color Selection And Then Make Mask Of That Color?
Apr 21, 2013I would like to make a color selection and then make a mask of that color. How on earth do I do that?
View 5 Replies View RelatedPhotoshop :: Could Not Complete Command Because There Is Not Enough RAM
Apr 15, 2012i have already made a few changes to an image but when i try to Distort>Wave then click ok it comes up with that message.
View 3 Replies View RelatedPhotoshop :: The Command (Invert) Is Not Currently Available
Jul 20, 2013Although a long time PS veteran, (currently CS5), for some reason I just never really got into the actions. Well a few days ago I learned a technique for making pencil drawings from photos and I surprised that I actually liked the results. Since a client wanted me to do this to many images, I thought it would be foolish not to create an action for it so I did so but every time I try to run the action, about half way through, I get the following message.....The command "Invert" is not currently available.
1. Check color mode of image
2. Make sure "add mask by default is checked in the adjustment layers settings
3. Make sure "add default masks on fill layer is checked in the layers panel options
Photoshop :: Creating Command Key
Jul 22, 2005could someone explain how to create a command key for an action?
I have created custom actions and would like to assign them to different keys such as F11...
Photoshop :: Place ... Command
Dec 16, 2008When I try to use the Place command it doesn't place the jpg at the center of the document. This is a problem because I'm using Place in many actions that I've created and if the jpg doesn't start at center of the document, then the translation is off.
Details: The document template I am using is 1960x3010. previously in CS3 when I placed a jpg or w/e it always put it at the center of the document (980,1505). Now in CS4 I goto use my actions and the Place command and it's always slightly off. The Place command is putting things at 983,1505.5 and such, which screws up the final placement of the images. SO what can I do?? Oh and I have tried this on OSX and Windows machines, bother with same wrong result. I have roughly 100 actions that use Place and would rather not have to go through and try and fix every single one manually when they worked perfect in CS3.