I have two photo's of the same cat, in one of them the eyes look a lot better, so I'm trying to select and move the eyes to the other photo. Should I extract the eye and move it?
View 5 Repliesis there a way that i can move/ multiple layers at the same time?
View 2 Replies View RelatedI am trying to move my sig layers which are just a jpg into the correct position, I also have a gif image which is not visible as it is hidden behind the layers. When I move some layers it does not move it on all the other frames (the frames are there cos of the gif file so they each are seperate).
Does anyone know how I what options or what tool do i select to move the layers in all the keyframes to the position i want?
I'll try and get a screen capture if u dont understand
I am having a hard time trying to add a logo to a picture. I open the picture, then I open the logo as a layer and it pops into the center of the photo. Problem is, I don't want it positioned in the center, so how do I select it and move it around to where I want it? Even when the layer is highlighted I can't figure out which tool will let you grab it.
View 2 Replies View RelatedI took the time to search and was unable to find anything that seemed relevant. I have also had trouble figuring out the documentation.
Is there a way to select a specific grip within a dynamic block and then update its position?
We are just trying out Maya 2014 and seem to have found a little problem that we cannot seem to work around!
If we say have two object and we select one of them, if we then try to move that object along one axis, it moves a very small amount and then selects the other object, but neither move any more, if we unselect the second object and then try to move it again the same thing happens.
We are using a Wacom Tablet as the main pointing device and all three butttons are set right, and we have also tried a mouse and this does the same. We do have a 3Dconnexion Space Pilot Pro also connected but this has been disconnected to see if this caused the issue somehow but without it connected the issues is still aparent.
Works fine on 2013 no issues at all, but the problem just seems to effect the move tool in Maya 2014.
I have checked that soft selection is disabled and it is? maybe I have inadvertedly hit a shortcut sequence to switch something on or off, but cannot find anything else amiss.
Any way of selecting an individual bezier handle and moving it by increments using the arrow buttons on the keyboard, (in a similar way to moving an individual point)? At the moment, I have two handles on different adjacent points selected, and am able to move them incrementally using the direct selection tool and the arrow keys, but I don't know how they originally came to be selected (I discovered that they were accidentally), or how to transfer the selection to another handle. I'm using CS6.
View 7 Replies View RelatedI want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
I am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.
Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.
For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.
Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).
Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.
I'm having trouble selecting an image on Photoshop 7. I'm trying to crop an image but when I use the marquee tool, it keeps jumping to different spots when I drag the corner. I recently had troubles with my computer mouse in that it was double-clicking faster than humanly possible and wouldn't allow me to highlight anything. I believe I have fixed the mouse problems because everything that I was having difficulty with before has been fixed - just not in Photoshop. I was wondering if it could be a problem with the program. I hadn't encountered this problem before anything was wrong with my mouse. As for the settings I'm using, feather is set to 0px and the style is normal.
View 6 Replies View RelatedI'm still having no luck with Refine Edge / Mask (CS5 & Win 7).
Following a tutorial at[URL]....
I come unstuck right after clicking on the Add Mask icon. In the tutorial the mask appears with a black/white checkered edge. As the commentary says, "You can tell when the mask is selected by the dotted border."
Well no matter what I do I do not get that dotted border, not when I click on the mask, double click, right click. (Nor do I get the checkered border when I click on the Layer icon. Both the layer and mask have plain white borders.)
I can't get to a Refine Mask option, only Refine Edge. When I try to improve the selection it looks as though I'm using an eraser tool at about 20% opacity, it just gets steadily more transparent. So how do I get the mask selected?
Usually when I want to work on a different layer, I will select the layer in the layers panel first, or alternatively hold down ctrl and left click on the image in my actual design that's on the layer I wish to change to. However I must have done "something" because now no matter what layer I am on, if I click on a part of my design that's on a different layer to which I am working on, it will automatically select this image and change to this layer. This is highly annoying because every time I am trying to edit something or move something around I suddenly find I am on a different layer again!
I'm not sure how I did this or how to change it back. When I started this design a few days ago it was working normally.
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 3 Replies View RelatedI have three areas in an image that I want to select. Using the magnetic lasso, I select one, then when I move to the other one, the first selection disappears. How can I keep the first one and move on to two others?
View 1 Replies View RelatedI have this picture, of course a jpeg, so the quality sucks, and i'm having problems selecting the two girls' hair. It blends into the background to where i almost have an impossible time seeing it at all but if i just cut it out it doesn't look natural anymore.
View 7 Replies View RelatedHow do i select only a certain layer's and merge or group them together? I though it would be something like... Ctrl + G or etc.
View 4 Replies View RelatedI edited a .jpeg in Photoshop, and removed the baground. I have a picture of a snowflake. It is on a blue rectangular background. I ONLY ant the snowflake in Publisher, so I edited the picture in Photoshop and now I have JUST the snowflake with softened edges in Photoshop. But when I go to paste it into Publishe, I always get an image with a white rectagular background, which defeats the purpose of the editing in the first place.. How do I get JUST the snowflake layer to paste into the flyer?
View 3 Replies View RelatedI have been creating an image in PS CS with the pen. Now I have added a new part to the picture by making a new path, selecting it and transforming it into a parth of the layer that allready existed. The strangest thing happens:
I can't select the original pic I created, it only selects the whole image. I can select the parts that I just added to the pic but I can't fill it with colour?
I want to alter a simple image from one color to another. The image is a gif image and I want to change it to color code #EF8216. Should be simple enough but when I type that in it gives me a color close to that but not that color (even though it says it is #EF8216). I have used CatchColor to test this and PhotoShop CS is not selecting the right color. I have tried using different ways of selecting the same color but none work. I need the color to match with part of my web site which is using #EF8216. When I use the bucket and save it, you can tell the diffence very easily with the naked eye.
How can I get PhotoShop to select the color I want?
i have a black image on a white background. i want to copy the image only to another image without the background. how do i do it with photoshop 7?
I have CS 2 at work and home...at work I can select multiple layers by holding down shift and clicking the mouse..and I can link them in the layer pallette but on CS2 at home I cannot do this..
View 9 Replies View RelatedI've been having issues selecting my layers in CS2. The first thing I noticed is that i'm not able to select more than one unless I put them in a folder. The second issue, new tonight as far as i can tell, happens when i'm selecting a layer in the image by clicking on the graphic and and it doesn't select the one i'm on but rather a layer that is turned off in a folder above. Does anyone know if there is something i can do to reset my layer properties?
View 1 Replies View Relatedif you paint bucketed a layer flat, then drew into it with eraser, revealing the transparent background, is there any way to quickly select the untransparent parts?
View 2 Replies View RelatedIs there any way to select pixels
based on transparency? For example, can I select all the pixels in an image that
are 50% transparent? I was surprised that I can't find a way to do this. I can't
even find any readout or anything that indicates the transparency of a given pixel,
or any recognition of transparency at all.
I am using CS3.
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 5 Replies View RelatedI used to be able to select a layer by clicking on the layer in the image. Now I have to click on it in the layers palette. How do I correct this.
View 3 Replies View Relatedive been trying to select just the dog from this image for a while now. i played with the channel mixer and found that at high contrast the red channel allowed me to select the dog best, but i still am having great difficulty with the dogs hair out around her legs and head. how would you go about it? it might not be the best image for this as the chair is brown and also the dog is brown.
View 2 Replies View RelatedI can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 5 Replies View RelatedI've been trying to follow Dave Cross's method of making my selection on the new Background. I've tried cropping my RAW image, opening it as a Smart Image and moving it to the Destination Image. Also I tried opening it as an Image. I can't understand why I can't make a selection on that Layer in the Destination Image.
View 2 Replies View RelatedWhen I click on a file in Bridge to view within Bridge the file Opens in Photoshop. This has only just started to happen and is a real annoyance....how do I revert to only opening in Photoshop with a double click
View 3 Replies View Related