Photoshop :: Rotate Brushes And Liquify Alternative?

Nov 11, 2013

Is there any third party brush or liquify tools ? I want to be able to rotate my brushes with a keyboard short-cut rather then always having to access the panel in Ps, I feel like the cookie monster with too much sugar looking around all the time, while trying to work effectively. 

View 6 Replies


ADVERTISEMENT

Photoshop :: How Do You Rotate Brushes?

Feb 7, 2004

So instead of rotating the whole page.. How do I rotate just the brush?

View 9 Replies View Related

Photoshop :: Possible To Rotate Brushes

Dec 30, 2006

way to rotate the direction of the different brushes? I have some downloaded brushes that I would like to be able to rotate to covere different sides of my image.

View 1 Replies View Related

Photoshop Elements :: How To Rotate Brushes Not Flip

Aug 9, 2013

I've looked everywhere! I understand I can rotate but I need to flip it horizontally! Which I can't do! I looked all over for the y axis and x axis way to flip but it doesn't show! I've been on the internet for hours trying to figure this out! All I learned was how to rotate, not flip

View 1 Replies View Related

GIMP :: How To Rotate Brushes Without Going Through Edit Brush Menu

Apr 3, 2011

is there a way to make these type of brushes turn(rotate) without going thru the edit brush menu

View 5 Replies View Related

Photoshop :: Alternative Scanline ?

Apr 5, 2002

creating a "1 x 3 selection" i am lost. What menu or tool selection makes this happen? Additionally, how are regular ole' horizontal scan lines created?

View 6 Replies View Related

Photoshop :: CC Alternative Language For Interface

Jun 18, 2013

I just installed the trial version of Photoshop CC and it installed the Italian version (same as my OS language) for the PS interface. Is there a resource to download and install the English version for the interface and all menus? I really don't feel good using it in Italian (all tutorials allover the web are made on PS in English).

View 4 Replies View Related

Photoshop :: Alternative To Duplicate Layer?

Sep 14, 2012

When using floating windows for images it is very straightforward to copy content from one image to the other.With docked windows in cs6 there's of course the duplicate layer-feature but there's certainly also a drag and drop method. But how to get this to work? I tried dragging Layers and Ctrl-tabbed, I dragged the Layers onto the tab of another image and tried so by holding all sorts of modifier-key.combinations.No avail. So what was the correct way to copy from one image to another by using Drag and Drop?

View 8 Replies View Related

Photoshop :: Any Alternative To Alt Click For Clone Stamp?

Jun 1, 2012

Is there any alternative to Clone Stamp tool's Alt-click? I am currently teaching an introductory photoshop course for disabled persons and one of my students has a condition that prohibits him from using the mouse and the keyboard at the same time. Is there perhaps some way to customize this command?

View 2 Replies View Related

Photoshop :: Alternative For Missing Pattern Maker

Apr 17, 2013

What is the alternative for the missing pattern maker, who could generate random patterns?

View 2 Replies View Related

Photoshop :: Displace Filter Alternative Implementation?

Oct 4, 2012

In my work I am using Displace (Filter>distort>displace) filter to create fake parallax shift, to create stereograms. I make two copies of image- one using positive-value horizontal displace filter, the other negative. When viewing those images as stereoscopy pair, you perceive them as projected on 3D surface defined by grayscale displacement map (a.k.a. depth-map).
 
My problem is highly specific: I need to be able to precisely control which pixels are displaced and by what ammount (ammount defined by greyscale value of map pixels). Current implementation of displace filter makes if very difficult.
 
My goal is this: every pixel of image will be shifted left or right by distance defined by greyscale value of directly underlying depth-map pixel.
 
The way actual displacement filter works can be described as such: If depth-map pixel is <50%grey, it 'fetches' and becomes bitmap pixel from left. If depth-map pixel is >50%grey, it 'fetches' and becomes bitmap pixel from right.As a result-I cannot, by comparing image pixels with underlying depth-map pixels predict what distance will given image pixel travel. Shift distance is not defined by directly underlying dept-map pixel. Instead, image pixel is 'fetched' by undefined depth-map pixel.
 
I realise it is highly specific requirement without an easy answer. I am willing to spend long time working on software side if need be and learn in process. I am becoming quite proficient in scripting (JavaScript). I need to know where to start and if there is a solution simpler than coding new filter from scratch.I am using Photoshop CS6 and work cross-platform (primarily windows).

View 21 Replies View Related

Photoshop :: Affordable Alternative To A Wacom Tablet?

Oct 3, 2005

alternative to a wacom tablet for mac.

View 9 Replies View Related

Photoshop :: Sort Brushes In The Brushes Palette?

Jan 30, 2006

I am interested in grouping and sorting brushes according to size, shape, whatever.

Right now when I add a brush library, they just stack on top of one another.

For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?

I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?

View 3 Replies View Related

GIMP :: Alternative For A Different Workflow?

Nov 14, 2013

what will be better than GIMP (Linux) for this type of workflow:fast processing of the tens of files, jpg to jpg: open, levels, sometimes color rorrection, scale, unsharp, export as jpg with web setting, not camera settings.

For now, GIMP is my main program because of familiar look and easyness of use, but it was designed for an opposite use, and is counter-productive for this kind of workflow.

Here is link to what use it was intended for vs similar to mine workflow: [URL] And similar to mine problem experienced by another user: [URL]

So far I went through:

ImageMagick
DigiCam
DarkRoom
Shotwell
GwenView

... still GIMP provides better results much faster.I was under impression that with wide use of the Web there bound to be some Linux software for a fast mass editing.

View 11 Replies View Related

AutoCAD .NET :: Alternative To Dynamic Blocks

May 17, 2013

I currently have dynamic blocks that I insert into a drawing. Grip points modify them.

Ideally the user can stretch the inserted objects without needing the grip points so that they behave like normal drawing entities.

If I apply parametric constrains to a set of objects and GROUP them, the object behaves the way I want but I don't know how to insert the group or reference its properties. There are no parametric dimensions in the properties pane when a constrained group is selected. Is there an alternative to Block and Group that would allow this?

View 4 Replies View Related

GIMP :: Alternative To Layer Masks?

Nov 24, 2012

You know how you can add a 'layer mask' to a layer and then apply various shades of grey to the mask to alter the transparency of the layer.

For some work I find this awkward as you cant see what your doing on the layer mask (or have a missed a trick here). Are there any alternatives? I would be nice if there was a blend mode to make one layer alter the transparency of the layer below.

View 2 Replies View Related

CorelDRAW Technical Suite X6 :: Alternative For 2D Architecture

Jul 13, 2013

Although it may sound strange for 2D projects and rapid technical presentation drawings I have for many years used CorelDraw. I like the ease of use and usability. The problem is the speed and response program for complex drawings. That does not compare to AutoCAD or similar (Archicad, Allplan, etc.). Closest to my idea of ​​approaching is Vectorworks. The price is also important. I welcome the mentioned speed, simplicity, 100% import-export DWG, opportunities to work with bitmaps.

View 6 Replies View Related

AutoCAD Civil 3D :: Auto-Linework Alternative?

Jul 24, 2012

I am currently using a FBK to run my auto-linework.  I am having a problem generating curves, closing lines, etc...  Everything works fine unitl I hit a curve or try to close a line.  I have tried many different point code variations and the only one that worked on curves was a "BC1 BC, BC1 EC".  Problem is I need multiple points on a curve to pick up laydowns, PVI's, etc...  I tried the "OC", no "OC".......just about every variation I could think of to no avail.  Is there an alternative to a FBK that works better?

View 9 Replies View Related

AutoCAD Civil 3D :: Text To Point Alternative?

Nov 29, 2012

I know the 'move text to elevation' tool works quite well but the elevation is purely assigned to the insert point of the text object, which in some cases could be metres away from the point it refers to depending on how the text is formatted.

Any tool, lisp or otherwise, that will read the text elevation and assign it to the nearest point/block adjacent to the object?

View 9 Replies View Related

AutoCAD Inventor :: Ms Office (excel) Alternative

Nov 15, 2012

Are there alternatives to the MS Office Excel for use in Inventor?

View 1 Replies View Related

Paint.NET :: Alternative Locations For Plugins / Palettes

Jan 7, 2014

Nowadays you see programs that install in the 

C:users[username]AppDataLocal or C:Users[username]AppDataRoaming folder, rather than c:program files.

I have mixed feelings about this, because it confuses me where a particular program is installed. But I do understand the benefits.
 
Installation in c:program files requires administrator rights, whereas installation in the AppData can be done without (administrator rights).
 
The same counts for pdn plugins. Currently they need to be placed in c:program filesPaint.Netplugins, which can only be done with administrator rights. In a strictly managed environment I'd need to ask my system administrator to add a few plugins to the pdn install folder structure. (Really, our system administrator can not be bothered with such trivial requests ;-)
 
But if there was a secondary location where plugins can reside,

e.g. C:users[username]AppDataRoamingPaint.NetPlugins

Then any (low-rights) user could add his own plugins to an existing Paint.Net installation without the involvement of an administrator. Wouldn't that be great?
 
Maybe such a scheme could be included in the upcoming PDN 4?

View 4 Replies View Related

Illustrator :: Alternative To Save For Web / Export As CSS Layers?

May 22, 2013

I'm am SO DEVASTATED that CS6 got rid of the option to save as CSS layers in Save for Web.  I just updated from 5 to 6 and now I'm looking for an alternative but am having no luck.  I've tried some scripts I've found online but none of them work the way I need, or at all. 
 
I do animation in AI where each layer is a frame on the animation.  In CS5 I could Save for Web and check the Export as CSS Layers box.  This would export all the layers in my AI file to pngs, where each layer is it's own png file, in one folder.  I could then import them as an image sequence in Photoshop and turn layers on and off with each frame to create my animation.
 
I tried exporting my AI file to a PSD file with maximum editability but the more complicated the animation (meaning the more layers and the more objects on each layer) it would start flattening layers without warning.  Not to mention the rendering time just opening the file in Photoshop and then trying to save it there once I had created all my frames.  Photoshop froze on me 6 times this morning while I was trying things out.
 
I'm desperate for a simple way to do the CSS layer trick.  If I can't find one, I'm going to have to go back to CS5 permanently, or until I can find a solution.

View 29 Replies View Related

CorelDRAW Graphics Suite X6 :: Finding Curveworks Alternative?

Mar 21, 2013

I have Curveworks for X5 but it isn't compatible with X6. There hasn't been an update and I use the program every day for deleting overlapping nodes and calculating square footage. Is there an alternative to this? I can't make the jump to X6 without this.

View 16 Replies View Related

AutoCAD Inventor :: Alternative Packages Not Recognising Spline

Jan 23, 2013

I am drawing an airfoil profile in Inventor for use in a CFD package. I have a system of points which I am plotting and connecting via the spline function and extruding them to form my blade profile. However, when I open the drawing in the CFD programme, it is recognising the spline as a series of straight lines instead of one continuous enclosed shape. The CFD programme I am using require a negative (i.e a solid drawing of where fluid is flowing). I have attached the inventor file I have created.

View 3 Replies View Related

AutoCad :: Loading Alternative Plotter Driver To 2000?

Oct 30, 2013

I am running AutoCad 2000 and using the plot-to-file option to create a file for use with a basic home workshop CAM system. This CAM system has been designed to run with data created using the Hewlett Packard plotter driver HP7470 but unfortuneately my version of AutoCad 2000 does not list this driver as an option under the Plotter Manager/Add a Driver tab. how I can go about finding and downloading a copy of driver HP7470 in order that it may be added to the list of options in the Add a Driver list?

I have tried using some of the alternative drivers listed in but all appear to give inaccurate or spurious results.

View 9 Replies View Related

Photoshop :: Is There A Rotate Canvas Plugin For Cs2 That Works Like The Rotate Canvas In Sketchbook Pro

Aug 23, 2013

Is there a rotate canvas plugin for cs2 that works like the rotate canvas in sketchbook pro?

View 4 Replies View Related

AutoCAD Inventor :: Import / Find Alternative Material Styles

Oct 5, 2012

Where to find/import alternative material styles

egg. AISI 301? EN 1,4310?

Working white sheet metal parts an missing a lot of materials. I know how change the existing materials, but would rather import them from the web.

View 6 Replies View Related

AutoCAD Civil 3D :: Copying A Centerline Alignment For Alternative Design

Jun 19, 2012

I've created a copy of my centerline alignment using the "Create Alignment from Existing Alignment" and was going to edit the new alignment to explore different options.  But the new alignment can't be editted.  It's lost something in the translation.  There is no grip edit for the PI, that the original alignment has. 
 
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS

View 6 Replies View Related

Illustrator :: Alternative Way Of Adding Same Stroke To Actual Fill Of A Shape

Nov 2, 2013

I want to use a 3rd party brush to 'color in' parts of a drawing or paint the background so it has a nice effect.However, when I use the brush tool to add color it reacts in an odd way as seen in the snapshot. I've looked at the brush options but am unsure of what will make a difference. Is there a way of devoting more ram to the program when I'm using it?
 
Is there an alternative way of adding the same stroke to the actual fill of a shape? At the moment all of my fill colors are block colors rather than having a kind of chalk / pastel texture that I can get with the brush. Basically, I would like to fill shapes with textured color rather than flat color.

View 2 Replies View Related

AutoCAD LT :: Decimal Is Showing Up In Wrong Spot For Alternative Units In Dimensions?

Nov 3, 2011

I need to show feet and meters in  my drawing.  I got them to show up, however the decimal is in the wrong spot.  Instead of it being 1.8288 meters for 6 ft., it's showing as 1828.8.  Everything I read says to 'just move the decimal'.  But how do I do that without overriding the actual dimension?

View 4 Replies View Related

AutoCAD Inventor :: Copying Files In Vault - Copy Design Alternative?

Mar 5, 2013

I have a folder that contains subfolders, then more subfolders. All these folders contain Inventor files. There are few different models there with drawings and related files... 

I need to make an exact copy of the folder at different location in Vault. To use Copy Design tool, I would need to do it few times, as there are few totally separate files in the folders.

Now, is there a way of taking main folder with its all contants and just copying/renaming it to other location? It would save me lot of time.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved