Essentially what Iam trying to do is create an image, apply perspective and then alter it so that it looks like it is printed on the inside of a tube. (best description I could come up with for the effect)
I know how to create the perspective in the text but I dont know how they create the circular effect.
how this effect was done was it a 3d app that did it or photoshop?
View 2 Replies View RelatedI'm trying to do a usable and real flat pattern for a laser cut on this type of part and I'm not able to do a cut across bend or other wrap around face feature.
Any method to do such a feature ?
how to make this effect - on the arrow where it says BUY 10 BAGS GET 1 BAG FREE*.. see how it rolls under the page.
View 2 Replies View RelatedI'm modeling a band that will be screwed onto the inside of a sheet metal cylinder. The band will be rolled to the ID of the cylinder. I'm trying to model the holes in the band, and place screws into the holes. I'm not sure yet how the holes will be machined out in the shop--whether they'll be drilled or punched, made before or after the band is rolled, placed based upon degree or arc length, etc.
1. Is there a better way to model the band and its holes?
2. How can I properly and easily insert the bolt into the holes since they're no longer "perfect holes" that can be used in an "Insert" constraint.
3. How can I then pattern the bolt so I don't have to insert one into each hole?
I am trying to use the sheet metal functionality to generate a flat pattern of insulation that is wrapped around a tank. The insulation essentially consists of a rolled cylinder with tabs at the cylinder ends that are to be folded inward to cover the end plates. I can't seem to find a way to make this happen as every time I am able to generate the tabs in the folded model they don't unfold into the flat pattern.
I am using Inventor 2010.
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedI am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedI photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies View RelatedI'm putting together a series of images, and I want the horizon line to be a constant from image to image, though they were not that way in the original files. I'm assuming that I should go with the picture that has the smallest distance from the bottom of the picture and then crop the others so the distance appears to be the same in them as well. But is there a way to make that a simple process?
View 1 Replies View RelatedWas really wanting to get the first image at the end of a spotlight inserted in the second image of the city off in the distance. Kind of like how the batman symbol is in the spotlight. The symbol is my churches logo and was wanting to use it for our Instagram.
Attachment 36457
Attachment 36458
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View Relatedhow do I stop an image aligning itself to the edges of the image area.
View 2 Replies View Relatedi used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedThis Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies View RelatedIn Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies View RelatedHow to transfer the bird in image one to the backdrop in image 2? I don't have a preference to where; what ever might look good or be easiest.
View 4 Replies View RelatedI am really new to photoshop... i have been trying to make vector art from live images but failed ...make this given live image like the another image which is vector.
View 3 Replies View Related