I want to do a Repair Installation of PS CS5. Both 32 and 64 bit versions of PS are installed on my Win 7 64bit machine, but the names of neither version appear in the 'Programs & Features' section of the Control Panel. What should I do?
View 9 RepliesI have a photo of a puppy, where just the top of the head where the hair is, is cut off - out of the camera shot. When using the quick selection tool and placing this image on a new background, the top therefore has a flat line at top. Which is the best feature to try to replace what was cut off in that original photo (shown below) ? Would that be the content aware patch tool? Or would you just use the paintbrush to try to paint it in? With all the subtle colors, that is difficult.
View 2 Replies View RelatedHow do I repair or re-load Photoshop CS3 in the Master Collection? The program is acting funny after several shutdowns, the preferences have been reset...and it still is behaving badly.
I usually just un-install and re-install Photoshop occasionally to get rid of hard gremlins...but...I am concerned with Master Collection. I spent weeks trying to install the original package...and the only way I could get it to install sanely was to wipe my disk to a clean windows install and then do the Master Suite First...otherwise the install would fail after an hour of loading in.
After several moves of pictures to a new disc (via File, Move within Photoshop Elements Organiser 9) the folder view no longer shows the correct photos. The photos are in the correct locations and the properties also show the correct location. If I select a directory in folder view however, several photos are shown that are not in that directory.
Â
I tried to repair the catalog, but that didn't change the problem.
Â
I am very much missing a facility in the Organiser to move directories, a complete directory tree or just the disk letter of my catalog.
caused by a flood in my location (Bavaria/Germany), I have many damaged photos, which where stored in cellar, which was flooded. The photos are dirty and wet, but they can be cleaned and dehumidified. Many photos have now areas with ruined colors and "fire blizzards" on it. can I prepare damaged photos with Photoshop elements (8, 9 or 11) in that way, that I get back a good picture?
View 5 Replies View RelatedWhere do I find Catalog repair & optimize tabs in organizer 10? How do I go about finding AVCHD files?
View 2 Replies View RelatedSuddenly I could not open one of the file. It is not so big file (120kB) How can I fix it?
The alart appears when I tried to open it.Â
i was running a trial version of X6 before i purchased - got to a few days left and had a few issues where i was able to run the programme, but had to open it, then press ESC before i could do anything..Now - a few days later, and the trial is now expired - i am unable to do anything - i cant sign up, purchase the software, uninstal, modify or repair it!!
View 8 Replies View RelatedI'm using Illustrator CS4. Suddenly the font One Stroke Script Let Plain has gone missing. How can I repair it?
View 1 Replies View RelatedI use Adobe Lightroom 4.3 64bit and am having problem with a corrupt catalog. The catalog contains a couple years of exposures with approx 87,000 photographs. I am running LR on Win 7 with quad core CPU and 10Mb RAM. I have used Lightroom for couple years and only problems I had experienced have been intermittent performance issues with LR. The years of photographs are in RAW format with editing in Develop module.
Â
I was using Lightroom 4.3 and it froze the computer while using develop module. I had to power off to reboot and LR catalog was corrupted. I reverted to the LR backup (I back up daily). After importing photographs, LR once again froze the computer during Develop work. And, another backup was corrupted.
Â
I went ahead and upgraded to LR 4.4 in hope that this will improve the situation. I ran chkdsk and other system utilities as well.I need Adobe to repair this corrupt catalog so I don;t keep wasting my time.
I am using Lightroom 3.4.1 and Windows 7. Upon shutting Lightroom down I got a message that Lightroom was unable to backup my catalog until it was repaired. When I reopened Lightroom it gave me the option to repair the catalog. The repair was "successful" and Lightroom opened as usual. However, the history panel of every single picture is blank BUT the pictures did retain my Lightroom changes. How to get that back? I do have a catalog backup but it does not include the work I just finished as I was shutting down Lightroom. I also have all my RAW files as well as their sidecar files.
View 2 Replies View RelatedI received the following message after my computer went into hibernation/sleep mode before finishing to complete an import of images.Once I click on "Show in Finder" I see there is a .lock file as seen here:
I have tried deleting this file (trashing it on my MAC OS 10.8.4) but each time I try to open I get the same message and the .lock file reappears. I did not back-up my catalog so I only have my Lightroom 3 catalog to restore from.
I got this message importing to LR4:
Â
=====
The files appear to be unsupported or damaged. (2)
   DSC01351.ARW
   DSC01352.ARW
=====
Â
Actually there are 41 files with this message. They happened on one day; all other days the files had no problem, so I don't think it is a card error. Every day I back up the card twice before deleting files for the next day. All copies have the error problem for that one day. I'm using a Sony a580. On the day in question, the playback function worked and I could see the photos I had taken.
Â
There is lots of software for recovering deleted files, but that's not the problem. I need to fix damage, and although I wouldn't mind paying, I can't find any programs that give you even a hint that they will work without the money down first.
I recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
The model repair tools is apparently new to 2012 version however I cannot see it in my Inventor interface (yes I am using Inventor 2012). Does it should be there or is it an optional add-in (at cost ?). If I should have it I'll get on to the software company and ask them why it's not installed properly !
View 2 Replies View RelatedI changed some feature on a sketch that was working and broke it. When I close the sketch a window shows the problems. A typical message is " Fillet1: Could not build this Fillet". The name "Fillet1" was automatically assigned. by Inventor. The questions is, how do I find Fillet1 in my sketch so I can fix it? I have looked in Parameters and that doesnt tell me.
View 6 Replies View RelatedI'm new to Gimp - I've had it installed on my computer for a while now but haven't tried to use it because it's got so many features it was just - well, intimidating. But now I've started a big scanning project involving a lot of old family photos, and as you can imagine they're not all in good shape. So I have some repairs to do.
The first one I scanned turned out pretty nice, but the second one is challenging me. It dates from about the 1920s and looks kind of sepia-toned but I had to scan it in gray shades because of a kind of moire pattern at the bottom (it's mounted on a piece of thick cardboard which is bowed and I had trouble getting it to lay flat on the scanner bed, so maybe that's why). The black-and-white image that resulted actually looks better than the sepia, but there are a lot of water spots in the upper left corner. Some of them are really large and in many different shades of gray, which is making it almost impossible for me to fix them using the cloning tool. I thought about just copying and pasting from a better section, but all those different gray shades mean that didn't work very well either. I can crop some of them out, but not all, and besides, the cropping changes the composition of the photo, and not in a good way.
Obviously I don't have great skills with this software (although I'm thinking that might be different by the time I get this project finished ). FYI, the version I have is 2.6.11, which is probably old; I could update if necessary. And it's running in Windows XP SP3.
See the image.
I am working with a goverment agency and we have hired two cosultants to work on a projects. They are using data shortcuts for surfaces, alignments and pipe networks. When they delivered C3D files to us get our reviews, (they burned the dwgs on the CD) all surfaces and alignments are broken.Â
My question is:
1) How do I repair those broken C3D objects?
2) What should i request the consultants to provide us so that when I open these drawings at my end, the surfaces are not broken.
how to repair a corel file, what is CARM (corel application recovery manager) how to enable this to option to enable the tick is disable .... does his application works to repair files..
View 2 Replies View RelatedI need to connect the ribs on the drawing. Here are some images to transactions automatically.
ILogic code must perform all operations possible, and impossible to ignore cases.
LR3 froze while trying to delete some images. Windows message - LR3 is not responding, Will look for a solution. Close window, I re-downloaded and twice tried to repair, I removed and re-installed. Same result.
View 1 Replies View RelatedI can start LR : but it gives immedidately the screen : unexpected error opening catalog, when I choose 'choose a different catalog' : he aks me to select a recent catalog to open, but this doesn't work en I neither can check the integrity of the catalog. Is there any possibility to do a repair of the program without losing my material from before ?  When I search .ircat I can' t find any files. Â
View 1 Replies View RelatedHow to try to retrieve a corrupt lrcat file. My lrcat file AND its backup are BOTH corrupt, and will not open. They are visible. I have an iMac, OS 10.6, LR 3.3, just upgraded to 3.5 today when I started having trouble accessing LR. I've been away for 6 weeks, but the rest of the computer works fine. There have been almost no changes/writes done to the HD since my last LR backup (and idiotic deletion of additional b.u. catalogs that were only a couple of months old. A trial version of Data Rescue II found erased files on my HD from years ago but it does not find those older LR b.u. erased files.)
View 16 Replies View RelatedI am using Windows 7 Pro. Recently I had some slowing down of system and found I had to clean up some Malware. System cleaned up but this error started show up on all trys to open program.
Complete error
Error 1317Â C:/users/administrator/appdata/local/autodesk/autocad/2012.
I also tried to open an older version of 2011, same error came up.
I then tried to go to repair then reinstall with the same error preventing the repair or reinstall.
I then tried to uninstall 2012. Uninstall worked ok, but on reinstall the same code shows up.
illustrator cs3 - every time i open a file it tells me to repair/replace an image.. when i do it ignores the fact i did and tells me to repair/replace the same image again. what shall i do? is that a windows 7 problem?
View 1 Replies View RelatedSome weeks ago, I posted about my inability to install SP3 -- (a host of) Error 1310 messages, related to permissions to access certain folders, according to the on-screen messages.
Last night, for the first time, I could not open Draw at all -- there was a pause while the PC tried to open it, then an useful message box that reported that a "problem" had caused Draw to stop working, and that I should close the program.
Trying to open all other X5 suite apps is similarly unsuccessful, though none produces that particular error box.
I tried to repair the installation. No go. More Error 1310 messages.
I tried to reinstall SP2, the last patch that actually worked for me. Error 1310.
I tried to uninstall the suite. Not allowed. Error 1310.
I then tried a series of steps to correct the access errors causing the 1310 messages. I tried unregistering/registering the msiserver; deleting or renaming the "Config.msi" folder to which the errors referred, hoping the newly created folder would not have the issue. I made sure I had administrator privileges (the 1310 error alleges that the user does not have access to the given folders). I did everything I could find online. No effect.
So, at the moment, I can't open, repair, update, or uninstall the Draw X5 suite. Short of wiping the hard drive (I don't have issues when I try to uninstall other apps), is there anything I can do?
I know this is a Windows issue, but with that "A problem has caused Draw to stop working" error message.
I am attempting to clean up/repair a damaged wedding photo to be displayed at a funeral. The photo (about 70 years old) has been crumpled or folded over the years. I have scanned it into the computer and have tried to use the clone tool to remove the fold lines. At a magnification of 200 or less, the clone tools works fine. However, I need to work at about 2000 magnification to remove lines from the bride's face and hair and veil. I cannot seem to get the tool to function at all at this mag. It will give me the dotted line and then change to the arrows but you cannot move ANYTHING.
View 2 Replies View RelatedHow do I repair a tubing constraint?
I use tubing in inventor, I always attached tube to whatever fittings I am using and everything is fine but if something gets moved that the end of the tube loses its contraint I'm ready to jump off a cliff!
Is there any way to get the end of the 3D sketch contrained to the fitting again?
Up until now I have always had to deleted the route and started over. Inventor Pro 2014
I'm installing PS CS4 on Visat 64-bit. The first time I tried installing it the setup stopped when it was loading the Language pack for Device Central. I started the installation over again and removed Device central from the install and then started it again. This time it got almost to the end of install but it then stopped again when it was trying to install the Photoshop CS4 English Language Pack_x64.
Has anyone else loading CS4 had this problem in Vista 64-bit?
We have a copy of Adobe Creative Suite 2 installed on one computer that was recently hit with a trojan. The software is still on drive D and is intact. The software was activated a long time ago. Drive C had to be reformatted and the OS reinstalled because of the trojan. I'm trying to reinstall the software since the old registry is gone. I was just going to reinstall over the old version. Since this is an upgrade, it wants the Photoshop 5 CD. We don't know where this is, but we do have the old serial number. When we installed this a few years ago an Adobe tech had us enter a secret keystroke that brought up a box that we could enter the old serial number. I don't remember this keystroke. Q1: Does anyone know the keystroke to enter the old serial number instead of having it search for the CD? Assuming I can enter the old serial number and get past this screen, will a reinstall trash the activation? I do not want to re-activate the product since I assume it will not let me do so. The software was installed and activated on this desktop and on my laptop. I assume it will only let you activate twice. The activation directories are there along with the DAT files, howver. Q2: What can I do to preserve the current activation? And no I can't follow the instructions which would be to launch Photoshop and go to the Help menu and choose Help > Transfer Activation. I can launch Photoshop, but I get an error ""Your Adobe Photoshop user name, organization or serial number is missing or invalid. The application cannot continue and must now exit." The old registry is gone since the OS was reinstalled.
View 7 Replies View RelatedI purchased a Spanish language copy of CS4, having trouble installing the program. gets the following message:
The program says "es imposible instalar algunos componentes esenciales de Photoshop CS4, para continuar con la instalación presione Continuar, para detener, presione Cancelar"
"Some essential components of Photoshop CS4 are impossible to install, to continue installing press Continue, to stop the process press Cancel"
I have an original XP Windows interface (64 bits)
1,56 Gb in RAM working at 600 MHz
160 Gb free in HD
Intel pemtium 4
chipset Intel Brookdale Gi845GEV working at 2.8 GHz
presses "continue" and afterwards he cannot open photoshop because the components are not properly installed.