Photoshop :: Remove Stray Pixels Command?

Apr 4, 2013

i have two scans i am cleaning up and i am noticing that there are a whole lot of single pixels on some of these.is there a good way to automatically remove these instead of doing this work by hand?

View 2 Replies


ADVERTISEMENT

GIMP :: How To Remove Stray Pixels On White Background

Nov 3, 2013

I rebuilt my line on white background from Rich2005 and Ofnuts. My latest version is darker, smoother higher res and wider (see attached).

The problem now are stray pixels, many of them unattached to the line itself. I spent a lot of time with an eraser, but still haven't gotten them all. THERE MUST BE A BETTER WAY!

I found this excellent link on the subject. [URL] RobA even has a script to do what I want. However, I don't think it is GIMP 2.8 compatible, as I can't seem to find it to run it.

View 7 Replies View Related

Photoshop :: Remove Background With Stray Hair

Oct 3, 2011

Extracting or replacing the background in this photo. I'm having a hard time because of the stray hairs. The background must be a solid white color.

View 9 Replies View Related

Photoshop :: How To Remove White Pixels From Image

Jun 4, 2013

I have accidentally made my drawing in black and shades of black (grey) on a white background in Photoshop. Is there a way I can delete the white pixels only and then have only the grey and black pixels remaining? If possible, I don’t want a hard pixellated edge where the white and grey/black pixels meet.
 
What I want remaining is only the black and grey lines with a transparent background.

View 3 Replies View Related

Photoshop :: Using Crop Tool To Remove Unused Pixels / Artboard

Aug 23, 2012

I have a clipped image that I've placed a drop shadow on (using layer styles) on a transparent background.  I want to quickly use the crop tool to remove any un-used pixels or artboard. 
 
I tried to activate "show the layer edges", but it does not account for the layer style/drop shadow I've placed and also it goes away when you start to use the crop tool itself.  So this doesn't really work.
 
Is there another way to do this?  Other than eyeballing it?  I want the image too be cropped as tightly as possible, but I do not want to tight too tight and cut of the drop shadow. 

View 2 Replies View Related

Photoshop Elements :: Cannot Complete Copy Command Because No Pixels Were Selected

Sep 26, 2012

When I try to copy a selected area I get the message "Cannot complete the copy command because no pixels were selected?

View 2 Replies View Related

Paint.NET :: Remove Transparent Pixels?

Feb 18, 2013

I need to know how to make these pixels in the picture go away. I tried making the background black but It makes it look ugly. Is thier an eaiser way to do this?

View 7 Replies View Related

Paint.NET :: Easy Way To Remove Random Single / Groups Noise Pixels?

Sep 26, 2012

I have pictures that have different objects over a canvas like/un uniform back ground.

I need to remove that background without any part of the objects them self.

I mange to get most of the background out using the magic wand , but i'm left with many random single/groups of noise pixels left in the picture since they were not captured with the magic wand.

most of the time i can remove those using the eraser or use the selection tools with different shapes around the pixels and press delete.

but those methods take lots of time, specially around a complex objects and as i'm getting near to them, i need to make my selections/eraser radius smaller and smaller.

I have tried to use a plugin called "Reduce Noise" that i found , but it does not work.

faster way how to remove this noise pixels without any part of the objects?

a plugin that "scans" the image/selected area and remove all pixels that are surrounded by transparency in it?

p.s I can't always select only the object/s itself/them self and just move it/them to a new picture.

p.s.2 maybe a plugin that the user can choose up to what size, a group of pixels, should be removed ?

View 13 Replies View Related

Xara :: Stray Line Appears When Exporting As PDF Or AI

Jun 26, 2013

When exporting a map to either PDF or AI (Adobe Illustrator), I inexplicably get a slight, straight, diagonal line that runs across the map.

View 9 Replies View Related

Photoshop :: Square Pixels Or Rectangular Pixels For Video

Sep 12, 2005

If I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.

I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.

How do I do this in Photoshop if it can be done?

View 1 Replies View Related

AutoCad :: Remove Box Next To Cursor When Typing A Command

Sep 29, 2011

How can I get rid of the box attached to the cursor when I'm typing a command? I just want to type in the command line at the bottom.

View 2 Replies View Related

AutoCad 2D :: How To Remove Area Drawn With Masked Command

Oct 13, 2011

We have a blocked out text area that does not want to be erased with the masked out text function. How can we remove an area drawn with the masked command.

View 2 Replies View Related

GIMP :: Adjust Clone Tool At 1080 Pixels Vertical And About 20 Pixels Wide

Oct 15, 2012

2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.

View 19 Replies View Related

Paint.NET :: Ordinary Layer Shift (move Pixels) By Multiples Of Pixels Is Not Sufficient

Feb 5, 2013

I have several layers in an image, and I need to align them precisely. The ordinary layer shift ("move pixels") by multiples of pixels is not sufficient. Is there a tool or plugin for PDN that allows sub-pixel shifts (i.e. moves by fractions of pixel)? And rotations by very small angles?

View 6 Replies View Related

Xara :: Export Edited Photos With 72 Dpi And 843*403 Pixels Or 72 Dpi And 404*404 Pixels?

Dec 6, 2012

I've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?

View 9 Replies View Related

AutoCad :: Drag Command From Command List Pane To Quick Access Toolbar?

Apr 18, 2011

AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Annotation Command Set Correct Layer For Duration Of Command

Nov 21, 2010

I am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.

I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.

I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??

View 8 Replies View Related

AutoCAD 2013 :: Get Message Unknown Command When Running Any VBA Command

Jan 4, 2014

After installing the VBA Module, I get the message "Unknown command "VBARUN"".  I've rebooted, restarted and tried reinstalling the VBA Module to no avail.  

View 4 Replies View Related

AutoCAD .NET :: Send Command Executes After Exiting Command Method

Apr 23, 2013

I used send command for Export Layout..But the line only executes after exiting command method.

View 9 Replies View Related

AutoCAD 2013 :: Command Line Appears Again After Plot Command?

May 15, 2012

I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot

The bug still happens;

- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.

This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.

Using Windows7

View 2 Replies View Related

AutoCad :: Command To Save File With Specific Name Using Single Command?

Oct 24, 2011

I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.

View 2 Replies View Related

AutoCAD 2010 :: Command Not Showing Up In Command Line

Nov 27, 2012

without reiterating a lot of what is said in this thread: [URL] ......

This happen outside the potential malware infection?

if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line.  so the MOVE command for example looks like this:

NORMAL:

Command: _move
Select objects:

NOW:
Command:
Select objects:

same with QSAVE and who knows how many others.

View 5 Replies View Related

AutoCad :: Execute Line Command Like A Single Command?

Oct 27, 2013

line command is a multiple command. there is a way to execute it like a single command?

View 4 Replies View Related

Photoshop :: How To See Pixels Like On A Ruler

Jul 2, 2011

I can't figure out what to do to see the pixels like in the image below:

[URL]........

View 5 Replies View Related

Photoshop :: Pinch Pixels

Aug 20, 2006

when i have a picture open and i click on paint brush tool or anything else and click on the picture to use it, that part goes blurry until i realise it?

View 5 Replies View Related

Photoshop :: Measuring Pixels

Apr 7, 2007

I've done a lot of web design with photoshop. Often times it's best to make a large picture and then cut it up into smaller pieces to fit the spreadsheet layout of an html page, but I've always found it very time consuming. I basically have to make rectangle marquees until I get the correct dimensions, usually making a conservative estimate, then zooming in to slowly count the pixels needed. Is there a way to type in a pixel number to automatically select to that point?

View 1 Replies View Related

Photoshop :: Is There A Way To Know How Many Pixels You Have Selected?

Sep 25, 2005

I'm doing science fair right now and i need to figure out how many pixels are in a certain selection (a laso). Is there a way other than knowing the width and height, a way to know exacly how many pixels are in a selection? or even how many pixels of a certain color are in a selection? if there isnt, does anyone know a program that can do this?

View 5 Replies View Related

Photoshop :: Blocky Pixels

Mar 6, 2007

I work for a small magazine and were running a feature on old school games, my question is this. The foreground is going to have a screen shot of lets say Super Mario Brothers. How can I enlarge the foreground image so that the pixels stay blocky and nothing gets smoothed out. The only work around I have for the mean time is using transform and screen capturing the transform before it smooths out the pixels again.

View 2 Replies View Related

Photoshop :: No Pixels Are More Than 50% Selected

Nov 12, 2005

I'm having problems with the magic wand tool. I try selecting an area which works fine but when I try to subtract an area from it I get this message: "Warning: No pixels are more than 50% selected. The selection edges will not be visible." I googled this and came up with a few solutions but none worked. The most common solution was to reduce feathering to zero. When I tried to do that I got the message: "A number between 0.2 and 250.0 is required. Closest value inserted." Any idea what I'm doing wrong and how to get rid of these annoying error messages?

View 8 Replies View Related

Photoshop :: Cloning And Pixels

Jan 28, 2009

Pixel/Cloning question: I have 2 images- one imports as 16.7%, 4000/3000 pixel dimension, 180 res, the other at 33.3%, 2400/1800 pixels and 72 res. When choosing the pixel size for the cloning brush, how does the number of pixels I choose relate to the image size that photoshop has imported your image as? If I decide to work on an image at a different %- zooming in or out, how does that affect the pixel size that I have chosen? Since the actual dimension of the pixel is variable, what criteria is photoshop using to determine the actual size of the pixel, and how does that change at different percents of zoom?

View 1 Replies View Related

Photoshop :: No Pixels Selected?

Sep 18, 2005

I am trying to work throught the photo restoration book. I am putting together a photo that has been torn into pieces. I have to select each piece using the lasso tool, use the option key with magic wand to select it in more detail, then make a new layer to store each piece in.

The first torn piece worked out fine, when I tried to select the second piece, I used the lasso successfully, then tried to hold down the option and click the magic want, it said that there were no pixels selected. I have run into this problem before.... I started over and over reselecting this piece and every time, it said that there were no pixels selected.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved