Due to size concerns, I began to convert my orijinal raw files taken by 7D as 5184*3456 pixels to 3000*2000 pixel by Canon Digital Photo Professional 3.12.52.0 to TIFF files . ( gaining almost %50 of the original size)
Then I'll use bridge to open them as raw files in Camera raw for editing ...
Do you think that, there will be some quality issues after then ?
I have checked the Camera Raw preferences to open jpgs and tiffs in Camera Raw. I have the Bride CC preferences set to Bridge CC for jpgs and tiffs.
I c n open jpgs in Camera Raw, but I can't open tiffs in Camera Raw. I must be doing something wrong.
The settings for jpgs and tiffs in Windows file association are identical.
The settings for jpgs and tiffs in Bridge preferences are identical.
Yet, I can open jpgs in Camera Raw, and I can't open tiffs in Camera Raw.
I have been following tutorials on creating HDR images in photoshop using the 32 bit function.
Once I have created the 32 bit image, and saved it as a Tiff file. I then go into bridge and made sure the preferences for camera raw are set to enable suppoprted TIFFs. However I cannot open this image through camera raw, it just opens up in photoshop...
In the turorials I have seen this does not seem to be a problem for others.
I have difficulties opening tif and jpg files in camera raw. I can not access Camera Raw. With CR2 files i have no problem. So far I know all is correct in the preference dialogue box. I bought lightroom 5 also. Can this be the cause?2
View 6 Replies View RelatedI made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
View 15 Replies View RelatedMy normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override format to "TIFF", the file opens with clipping path shown.
I recently did a photoshoot with a car. It was the first time that I planned to professionally use 32 bit HDR merging. I shot 4 exposures of the front of the car from the side, and shot another 4 at the same brackets of the back of the car while mounted on the tripod.
Here's exactly what I'm trying to do;
Take 2 different 32 bit TIFFsAlign them to be a panoramaExport to a single, true 32 bit TIFFAdjust & tone that 32 bit panorama TIFF in Camera Raw
I've worked with panoramas plenty of times, but when I take the 32 bit TIFF files into photoshop, I pass through CR without doing anything. Once the TIFFs are in PS, they are converted to an 8 bit mode automatically. I also tried to take those 8 bit TIFFs, auto-align, switch back to 32 bit mode, and then export as a 32 bit TIFF. I then took the panorama 32 bit TIFF into Camera Raw, but obviously, the damage had already been done and it was not true 32 bit.
How to open JPG, TIFF files in camera raw from Elements 10 organizer.
View 22 Replies View RelatedCamera Raw takes almost 2 seconds to save 103MB tiff file. (I use Photoshop CS6)When i save a bunch of tiff files, camera raw uses only half of my CPU and half of my RAM. In addition, I use SSD that writes 530MB/s outside Photoshop. According to these specifications it should save 5 images within one second. But it doesnt.
View 12 Replies View RelatedI have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine,
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
I have a camera not (really) supported directly by LR - so i use .tiff files created by the camera bundled software.This works fine, and i have earlier had support from this forum regarding lens-profiles using .tiff files, with great success.
Now i would like to be able to use my own camera profiles with LR with my .tiff files - when i open the RAW files (an old version is supported, so they can be opened) the profiles are availiable as expected, but when i change to the .tiff version of the file, the profiles are gone.
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
I am using PSE 12 as an external editor for Aperture. When I ask to use an external photo editor, Aperture creates a .tiff file in my Aperture folder, launches PSE 12 and tells it to edit that .tiff file. This all works great. When I am done editing in PSE 12, I ask it to save the file and it saves it back to the original Aperture folder with a .tif extension. I can instead say "save as" and then it suggests the file name with a .tif extension. When I correct the extension to .tiff it warns me that I'm going to overwrite the file (exactly what I want!). I say yes and then I find out that PSE did not overwrite the file, but wrote it as a .tif file anyway. I have to go to the folder, delete the .tiff file and rename the .tif file to .tiff and then everything is fine - but what a hassle.
View 3 Replies View RelatedCan't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies View Relatedmy PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script [URL]....right? but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw.
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedI don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies View RelatedI shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies View RelatedHow to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies View Relateddo enough basics to layout a 32 page quarterly magazine. Quark is fairly simple and I can do the basics with Photoshop. I have a question about the tiff format. My printer guy says I need to change all photos into CMYK and save them as a tiff. When I take a 853kb file and save it as a tiff the size goes to 12mb. Usually I don't worry about it, but this issue our members are submitting photos and I have a lot to change and put in. The size of the magazine file will be ridiculous.
View 1 Replies View RelatedWhat's the difference between saving as a layered tiff and saving a psd file.
Tiffs show up in my folders image preview window, whereas psd's don't, hence the question.
1. Does it contain vector data?
I always thought it's a raster-only format. But if you can save your Photoshop project as a TIFF instead of a PSD - preserving all of your layers, effects AND! shapes - that means it does right?
if it does contain vector data, then
2. Does a flattened project saved as Tiff, still does?
I'm asking all of this, becouse I have A4 300dpi project for a newspaper and I was asked to send it either as a EPS or TIFF. I was also asked to convert all the texts to vector (shapes). So the project contains both - raster and vector data. If I save it as a EPS file, Photoshop cannot reopen it again (don't know why -
The only option left is to save the project as TIFF. But if I save it as TIFF do I loose the vector data of the texts (are they rastarized upon saving?) in the project?
I have been going 'round in circles trying to decide whether to set my Lightroom external editing pref's for Photoshop as PSD or TIFF. I've very recently downloaded Photoshop - I'll be using it after I've done what I can in Lightroom, just for photo's - I've never used 'layers'
1) I read somewhere that PSD might be easier (or necessary) if I need to re-edit. I also read PSD could be a good idea as it would be easy to see which is the master edit, and which files have been saved as TIFF, for print say
2) I also read that you should never flatten a file, at least not until you need to (ie: save as TIFF for print) - any thoughts?
3) My thoughts (mixed up though they may be!) are to say edit layers etc in PS (either TIFF or PSD) then just press 'save', but not flatten layers (I understand the PSD or TIFF will then be alongside my original raw file back in Lightroom, as LR/PS automatically does this). Then say for print I would then 'save as' a TIFF (ie: for printing), or JPEG (ie: for web), and this would automatically flatten the file. If this is correct, say I started off with the un-flattened PSD for example, would I need to firstly make a copy of the PSD, or would just doing a 'save as' still keep the original PSD 'master file'? Also, after I say did a 'save as' for a TIFF, could I then just delete the TIFF and do another 'save as' if I wanted to do another print in the future, or better to just keep the TIFF in Light room alongside the raw, master PSD or TIFF / JPEG?
4) I won't be doing huge amounts in Photoshop, so would it be worth looking into using 'smart images / smart filters' - I'm just thinking that if document is not being flattened anyway would it be worthwhile?