I need to connect a rapport with others(print on fabric for textile industry). It looks like a mosaic, however the pieces doesn't connect side by side at the same height, but side by side sometimes higher, sometimes lower.
The thing is: when I try put then together the limit of the layers create an edge that prevents connection. I'm sending some images to try to make this clear: 1- all layers together with the thin line between the 2- closer to junction 3- closer 3200% to see what really happens.
I am trying to make a series of curved walls with windows in them as I place the windows they do not place into the walls because of breaks in the wall line between them. I have atempted to make a line out of the wall and convert the line into one single wall segment but it always breaks back down to the geometry of arc+ arc+circle exctra is there a way to make the wall one single wall or to make a series of arcs into a single polyline so I can convert it into a wall face?
Im having a little issue with connecting lines and circles but not sure how to shorten the question to do a search on here. I have 2 concentric circles (the two circles form the walls of a round tower wall) which have 2 lines (representing a wall) passing through them. I want to join the circles from the circumference to the lines, but each time I try to do it the line seems to default to the center of the circles and to the endpoints of the lines which is not what I want. The eventual aim will be to remove a section of the circles and the lines where the new line connects to them to form an opening in the walls.
Ive tried <shift>right click and selecting tangent on the circles but I cant figure out what to do on the lines and it constantly defaults to the end of the line not to where I want to intersect the lines.
I need to create two separate enclosed objects (a & b) – both of which individually can be reduced/increased in size using the contour tool.
I initially created a rounded oblong shape and added two wavy lines. I'm having trouble removing the unneeded horizontal lines and connecting the other lines up.
I use splines a lot to provide a contiuous smooth curve between two lines which are co-planar. The splines are drawn by connecting the ends of the two lines and then the tangent direction set by hovering over the end grips. I then use the FLATEN command to convert these splines to polylines that can have their lineweights set to a value other than 0. My problem is that sometimes when i use the FLATTEN command, the spline is erased.
I am having trouble with my lines connecting...have tried adjusting the line effects, edge mode, jitter, line extension...but Trim and Facet are not working with certain lines not connecting or not trimming. I attached my dwg file.
I need to connect a rapport with others(print on fabric for textile industry). It looks like a mosaic, however the pieces doesn't connect side by side at the same height, but side by side sometimes higher, sometimes lower . The thing is: when I try put then together the limit of the layers create an edge that prevents connection.I'm sending some images to try to make this clear: 1- all layers together with the thin line between the 2- closer to junction 3- closer 3200% to see what really happens.
When the image is magnified 3200% we can see clearly that this "crack" is actually the edge of the layer that has become a bit clearer, then edge with edge, it creates an impression that there is a line in the overall picture. And I can not just cover it because each layer will be duplicated automatically by a machine rapport. So is there any way to make the edge of the layer does not check clearing?
i missed the july 15th deadline, my welcome screen is not connecting and i dont know how to tell what my storage is, what the status is? although, my pictures show up on photoshop.com account, how to fix the welcome screen.
I have been having an issue with CS2 for some time now. Every time I connect an e-SATA external hard drive, the message pops up saying "the licence configuration data is no longer usable. Click OK to continue".  A new popup window appears, with the message: "Your 30 day period to use Photoshop without activation is over. Code:
I scanned several magazine covers (believe it or not I'm one of the few who still dosen't own a digi cam) and now want to place each pic/scan side by side or one on top of the other to resemble what a picture would look like if I had taken it with a digi cam.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
by using the shortcut keys and the drop down menu for hue/saturation it connects to the eyedropper tool and locks up. Hue/saturation window never opens. Not sure what is going on. Running PS7.0 on this computer Windows 7 with no problems for about a year until today.Uninstalled and reinstalled the program twice today and still acting the same. All other commands seem to be functioning properly.
I have just transferred all my photos from an PC (microsoft) to an iMac. At the same time I upgraded from elements 5 to version 11. Before doing the transfer I saved all the tags to the metadata. On the iMac both the tags and the keywords in the metadata are all in place but when I do a search on a particular tag, only a small number of the relevant photos (the most recent) are found.
I recently downloaded some sketch brushes off a website but when applying them to a shape like a circle, the brush doesnt follow all the way through. Like on the right side its got that separation.
i have 1 camcorder in firewire 1394 MiniDV to record in my computer. The drivers is ok, the camcorder function well on other pc with corel x4 or pinnacle, but on the pc with x5 ultimate, when i want to make capture i have message error "not connecting or no drivers..."
I have an older water line project that was connected to the file water.mdb. I am trying to connect the dwg to the mdb and am getting an error. I have enclosed a screen shot of the error. FYI i am using 2011 Civil 3d, and the dwg was originally done in Autocad Map. (2005 I think) .
Why have i got 0 for all my z values I have followed all the steps in the Guide and still have 0, my x and y axis are ok. Im wondering if it may be something to do with the Digimap and OS downloads.
Another thing, How do i conect all my drawing downloads i have together ive tried the coordinates system and just dont get anywhere.
Downloaded from Digimap i have 20 different drawings of this section but i cant connect them together. I have a catalogue system which is just like a coordinates section with these 20 places. All my drawings are fine they open in autocad fine just need to put them together to link them.
I have two sets of identical spur gears. I want them to be lined and connected big-small-big-small gear. But how to connect this two sets together. I can create motion and axes constrains but it still lacks teath meshing. I found some tutorial how to create differential drive, it works with downloaded gears but not with one that I create (it says to set imates to visible which does nothing and alt-move mesh imates toghether which also do not work). I work with 2009 and 2011 versions.
When joining 2 pipes (cylinders)how do you get a radius/fillet where the 2 pipes intersect? How can you control the radius size? Attached is a 2010 version and 2013 version MAX file
I'm getting around to installing 2013 Max Design on my network of 5 computers.They are all Windows 7 64-bit, and all except one are working fine with Distributed Bucket Rendering.
The one that doesn't work has 2013 installed, and the Windows firewall shows unblocking for
Autodesk Max Design 2013 64-bit Mental Ray satellite for Autodesk Max Design 2013 64-bit Mental Ray satellite server for Autodesk Max Design 2013 64-bit
The problem computer shows up in the network from the host computer and can be pinged.
It's also not that I'm using too many processors, because I'm checking each one individually.
I have a curved path. I want to add on to this path with another curve. I know how to make another curved line, but I don't know how to make it to where the final product (when both the paths are connected) nice and smooth. Currently I'm having to try and do it by eye (I'm trying to make it as smooth as possible by looking at the first path and making the curve on the second path as close as I can).
any editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop CS6, nothing happens...Photoshop does not open as it used to. I'd thought it might be Nik Collection trial or OnOne photo suite trial I'd installed, but I uninstalled both and restarted my computer, and the problem still exists. I'm using the current creative cloud version of both lightroom and photoshop.
When I start X2 I get the error "The download of a required Smartsound file failed..." It checks for updates and downloads previews just fine so I don't know why I get this error when I startup.
I created a grading and a surface for a pond that is abotu 30' away from a roaway that has a seperate surface. What would be the best way to connect the two surfaces? I need a uniform slope from the edge of pavement to the top of berm of the pond.
connecting two circles with different diameter into a solid. I tried loft, but it is a partial solution since it creates a surface. I know there is a solid option. There surely is a way and a simple one but i don't know how. Bellow there is a picture with diameters and length of the mast. Also i included a dwg file. Not much done there.
