Photoshop :: Print Resolution - HP LazerJet 9050
May 24, 2013
i print to a number of networked printers. All print fine apart from one, an HP Lazer Jet 9050. All files sent to print from photoshop result in very low resolution, as if a mesh is places over the screen.
A range of PC print photoshop to the HP 9050 with not problem. I can open a jpeg in a number of other spftware packages such as microsoft picture manager or InDesign and send to the HP 9050 and these also come out fine. The low resolution issue is specifically photoshop on my pc to the HP 9050 and no other.
View 3 Replies
ADVERTISEMENT
Mar 17, 2013
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies
View Related
Nov 8, 2006
I am making christmas photocards. I used photoshop 4.0. I started with a blank file 4x6 inches. I saved with a quality of 10. I ordered the prints online and they came back with the worst resolution.
View 3 Replies
View Related
May 13, 2004
I'm designing a real-estate flier for a friend and am trying to add some text to a white background. There is going to be plenty of text and photos on the sheet so I'm trying to use a font size of 8. When I printed this out the text was extremely blurry. I tried several different fonts with the same result.
What would be the best setttings to do something like this? I think I'm supposed to use CMYK Mode but am not sure about the resolution or the pixel dimensions.
View 9 Replies
View Related
Jan 5, 2006
I have been asked to make a postcard, but the problem is I have only ever used Photoshop for web images, ie at 72 dpi.
I was wondering, what resolution do I have to use for print materials? 300 dpi?
Also, if I have an image taken from a website can I just put it in photoshop and change the resolution to 300 dpi, then use it in a print project? Is such a thing workable?
Or, do I have to use images with a starting resolution of 300 dpi?
View 2 Replies
View Related
Mar 15, 2012
I'm trying to print the presidential medal of freedom in high-res but all the samples I found on Google image search and on wiki are low-res. Since I need it for print, I increased it to 300dpi and it looks really jagged and blurred. I tried to search for a vector version, but couldn't find it. This is how it looks:Â
I tried all the filters as well, but couldn't find one that suits me (cutout is the closest, but it still looks horrible). I'm using Photoshop CS5.
Â
Except finding an original high-res (which is impossible right now), in which other creative way can I fix it?
View 5 Replies
View Related
Apr 30, 2013
Here is a snapshot of the image size window:
Is it true that if pixel dimension is very large in size than the resolution number under document size doesn't matter ?
if my photo will print clearely choosing the belwo document size.
View 12 Replies
View Related
Aug 18, 2013
Just recently moved to Gimp. I like it but I am struggling. Millions of questions, but to start: How can I alter the resolution of and image without changing its physical size. I am trying to keep to a print size of 7x5", and reduce the resolution to 300pixel/inch. When I go to: 'set image print resolution' and change the X and Y resolution, the 'Print Size' changes with it. I have tried everything I can think of. I have make a new file at the correct resolution and pasted the image in, but the colors in the photos changed, so I dumped that idea.
View 1 Replies
View Related
Mar 16, 2013
I'm building graphics for a large display wall, too large for Illustrator to handle in actual size.
Â
So, I'm working at half the actual dimensions and at 150 ppi. I want the final file for print to be actual size (obviously) plus be 300 ppi.
Â
A company will be doing this, and because I'm not sure what they do to double my file for print, I'm not sure what the effect will be.
Â
QUESTIONS:
Â
1) If I build vector graphics at half size, 150 ppi, when they double, will it actually be at 300 ppi?
Â
2) If I add photos (raster) at 300 ppi to the 150 ppi artboard, will they retain 300 ppi when the final file is doubled on their end, or will it be bumped up to 600 ppi?
View 3 Replies
View Related
Sep 1, 2013
The print resolution is no longer displayed making it difficult to decide if I need to modify the resolution prior to printing. Second, Lightroom 5 no longer generates a print preview. I select this option in my printer interface but sends the image directly to the printer without generating the preview. I did not have these issues with Lightroom 4 or earlier versions.
View 1 Replies
View Related
Aug 25, 2012
In Lightroom 4, I need to figure out how large a photo can print and still keep good resolution. I .e., I want to print a photo at 20x30" and I need to know ahead of time that it will look good printed at that size.
View 9 Replies
View Related
Sep 9, 2012
In the Print Module, with the Print Resolution box left unchecked, how does LR choose the ppi that will be sent to the printer? I realize that it is using an algorithm to choose a ppi.
View 12 Replies
View Related
Apr 16, 2014
i want to check all the photo resolution within a file, before sending to print, is there a way to check them all in one time?
View 4 Replies
View Related
Aug 25, 2007
I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Nov 17, 2012
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
View 2 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
View 13 Replies
View Related
Dec 5, 2012
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
View 6 Replies
View Related
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Apr 26, 2013
I use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
View 9 Replies
View Related
Jan 9, 2009
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jul 26, 2009
I have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies
View Related
Feb 6, 2009
I get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
View 2 Replies
View Related
Jan 12, 2011
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
View 2 Replies
View Related
Oct 14, 2011
I am having trouble printing to an HPÂ Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
View 8 Replies
View Related
