I have a picture of two ladies posing and I want to change the picture into a constellation detailing their bodies. My first thought was to do a transparent overlay on top of a black background and then had hoped there was some way photoshop could take a point-sample, giving me their basic structure. I was unable to find any way of doing this so far and was hoping one of you could point me in the right direction.
View 4 RepliesI have 2 layers one with a gradient and another with some text and the gradient is set to overlay. I need these layers merged with the effects still in tact. Is it possible to do this?
edit: alternatively I could magic wand layer 2 and cut those pixels from layer 1 but, how i can get the magic wand to not ignore blending effects. Say i have a drop shadow on text the magic wand just circles to text and not the shadow.
I created a simple layer shape using the elipse shape tool, and applied a color overlay (blue) layer effect to that shape. The applied color overlay doesn't fill the entire shape (see image) making it look like the shape has a very wide stroke applied to it (it doesn't). If I "copy merged" the pasted copy is a rasterized version of the problematic overlay. If I rasterize the layer, the fill then covers the entire shape.
Jpeg below. Shape is black, color overlay is blue. There is no other effect applied. Blend mode normal, opacity 100%. The image upload won't let me attach the layered PSD file.
I'm running PS CS6 under Creative Cloud.
I am trying to add the orangy-morning/evening overlay to an image.
I have a high resolution version of this image and I'm trying to add an orangy overlay so it looks like the morning/evening, so it looks like the third image below (Making a high resolution version of it).
I've tried playing around with hue and saturation without much success.
Take a look at the following site:
[URL]
For the background image halfway down, there's a totem pole sort of "merged" in with the color. But it's not simply an overlay blend mode or opacity change. It has essentially seemed to adopt an entire palette based on the background color itself.
I think I recall a way to create this effect in Photoshop, but in GIMP I'm stuck. How would one go about making that "color overlay", given any regular picture and a colored background? I'm doing this for a website, by the way.
I have attached an image of a butterfly with a broken effect on its wings. You can see the effect inside the marching ants. How do i get this kind of effect?
View 2 Replies View RelatedAs shown in the upcoming movie "a scanner darkly".
With keanu Reeves.
Sort of like GTA(video game) graphics on the game case.
I have found what I can only assume is a bug. I have a PSD file that when opened in CS5 looks as it should. When I open it in CS6 any shape with a gradient overlay displays as black. When I choose Save for Web it displays correctly in the save window, but the file displays the shapes as black in the regular Photoshop view.
View 2 Replies View RelatedI used to use Ps normally, but since I've reinstalled my Windows recently so I had to reinstall Ps as well. However, when I used Gradient Overlay, it didn't work out correctly as it's supposed to do: no matter how I configured the option, it just filled a solid color instead of a gradient (as number 1 in picture). When I clicked reverse, it filled with the other solid color. Number 2 I used Gradient Tools to make it easier to compare.
View 3 Replies View RelatedWe just upgraded at work to CS6 and overlay blending isn't working like it did in CS5.
Overlay used to multiply values below 50% and add screen above 50% regardless of what the layer underneath looked like. I'm not sure what's going on now.
Am I the only one seeing this? Is there a setting somewhere to get it back to working the way it was? I haven't seen any documentation on the change and a search of the support shows no one else complaining about the same issue. But me and my coworkers are all seeing the same issue.
[URL]....the above background photo has those lines over the photo to soften the image's presence as a background photo. how do i do that?
View 2 Replies View RelatedI want to overlay structural drawings at a scale of 1:200 over the site plan which is at a scale of 1:500.
How can I do this and is Photoshop the best software to use? I have the drawings saved in pdf format.
Trying to make Gold text like examples on Google. All use Gradient Overlay. Cannot find it.
View 3 Replies View RelatedI have some text on a transparent background. I want to apply an image over the text so that the image is only within the text lines.
View 2 Replies View RelatedI am trying to over lay an image,
I have one main image and what i now want to do is have a much smaller image, that will overlay the main one and place it in the corner say of the main image, so you can see both images,
I am working with DVDit pro 6.0 and I am trying figured out how to make a background menu and the overlay layer that goes with it.
I am able to make an overlay layer with the following path: Layer/New/Layer and choosing Overlay in the Mode section. The thing that I don't understand is how to work with this Overlay layer .
I understand that the overlay is the subpicture but i'm a little lost. For example, if I have a button which is a picture and I want that the overlay color would be yellow. How to make this work?
Is it possible to create an image that I can then use to overlay images on my website, to give them the apperance of being set to opacity 50%?
View 2 Replies View RelatedI have using the overlay feature in Photoshop for two years now. It's always worked well, I put a solid color on one layer, a black and white image on a layer above it, choose overlay, and the black and white image takes on the color from the layer below, keeping all the contrast of the original photo. It's why I like this instead of just changing the opacity, which just lightens and washes the image out, even though the color shows through. Now suddenly when I try to do the same thing I've always done, it takes on the color but I get all these bright blown out areas. I have always worked in CMYK as it's for print. I tried making the image black and white and copying it directly from the grayscale file and pasting it into the CMYK file, and I've tried making it a grayscale image, and then turning it back into a CMYK before I paste it into the actual CMYK file I'm working with. Both ways have the same bad result. It's almost as though a preference accidently got changed but I can't find what it might be.
View 1 Replies View RelatedI am trying to create a business card and do something that is probably very simple but I have no clue. I would like to have this white faded overlay done on a photograph I load like what is done on the business card
As for the photograph I load I would like to make the background on it completely bright white even though its not in the photo.
I made this image for printing onto t-shirts, but the printer came back and said that it was far too low a quality. only 23dpi when they require at least 72 and preferably up to 300dpi. I tried to increase the resolution but fell back on trying to remake the image.
View 1 Replies View RelatedIs it possible to use the crop tool but have an image fill overlay instead of a grid overlay? I do a lot of photo editing where the image has to be in certain boundaries but also has a complicated background, and I'd like to reduce a step.
View 3 Replies View RelatedHow do I put a gradient overlay on a photo?
View 2 Replies View RelatedI love hitting backslash when I paint on a layer mask, which shows the red overlay so I can see better what I'm doing. I somehow changed the red to a color that doesn't show up well. How do I change that back to red?
View 3 Replies View RelatedAny way to use a whole color layer as a grayscale or color mask (without having to destruct it), and would save on extra layers to mimic the effect of JUST MOVING THE COLOR OVERLAY BEHIND THE COLOR INFORMATION. add a "render color layer in back", or something like that.
View 1 Replies View RelatedThat program by default showed (x,y) coordinates for pretty much any tool. This was really helpful when trying to get a circle around an object precisely. Is there a way to get this displayed in PS?
I am using PS CS (Premium Suite-Educational version).
when i wanna change the colour of a shape/photo etc i often use the colour overlay option becuase it lets me eye drop to the colour i want. The problem is that i cant apply effects to this picuture/shape later as the colour overlay still has priority, ie if i wanna put a texture on it it still shows the colour overlay. Is there a way to merge the layer so it takes on all effects and i can apply new ones?
View 8 Replies View RelatedMy Art teacher has just got Photoshop Elements 4.0, and needs to know how to 'overlay' one image on top of the other, for example, placing a leaf over a picture of a face and fading it slightly so that you can still see the face.
View 2 Replies View RelatedIm working on this tut from grey cobra. It shows you how to get that worn out look.
At one stage you're told to duplicate the background, go to its blending options, choose pattern overlay, chose crepe paper and use overlay as the blending mode.
This is supposed to create a subtle noise effect on the appearance of the background. The screen shots in the tut show this.
When i do it i cant see any change after the effect has been applied to the layer. Ive got 100% apacity and all that. Could anyone suggest a reason why it wont work?
i'm trying to do is too replace the American flag with the other flag. From the images below you can see that I wasn't really succesfull when I did it. It just isn't natural.
View 1 Replies View RelatedI have a project in which I created two layers, the top one of which is in Luminosity mode. My printer is printing the top layer only, and I cannot figure out how to print my project with the layer interaction.
I am working in Photoshop CS2, with windows XP.
i how to make these overlay twirl pattern things, etc on top of these pictures?
i would ask the graphic makers themselves but they don't like to share any secrets. i tried experimenting myself but i can't figure it out.