Photoshop :: Outline Of An Object
Jan 25, 2008i wanted to create an outline of an image and everything else to be plain.
View 2 Replies
ADVERTISEMENT
CorelDRAW X6 :: Update Outline Width After Resizing Object If Scale With Object Selected
Dec 14, 2013Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Illustrator :: How To Trim Object To Only Show Up Until Outline Of Object Behind It
Jul 4, 2013I have a rounded rectangle and an object on top of it -- how do I make it so that the parts of the object outside of the rounded rectangle are hidden?
View 5 Replies View RelatedPhotoshop :: CS5 - Removing Fill Of Object But Keeping Outline
Mar 26, 2012I was wondering how to remove the fill of an object but leave the outline intact? e.g. the image here
[URL]........
if i wanted to have his outline only so he will look like this when finished
[URL]..........
I am using Photoshop CS5.
CorelDRAW X5 :: Conversion Of Outline To Object
Aug 30, 2011Is it possible to convert outline to object in the adobe reader ?
View 7 Replies View RelatedCorelDRAW X6 :: Convert Outline To Object?
Jan 28, 2013Outline.cdr
I don't know what's wrong with the outline that I get this result.
CorelDRAW X5 :: Combo For Getting Outline From Another Object?
Nov 1, 2011I use this combo all the time for getting the fill I want from another object.
Is there a combo for getting the outline from another object?
What i like about this is you don't have to deselect the target object as in Right Click and Drag.
Xara :: Outline Or Border Around Object?
Aug 29, 2013How do I put a nice black outline or border around a single object? using the glow from shadow tool but that ends up as a very jagged outline.
View 9 Replies View RelatedPaint.NET :: Outline Object Not Working
Nov 17, 2012I can't get outline object to work. I installed it by downloading, extracting, and cut/pasting the dll into the effects folder (c/programfiles/paint.net/effects), but no soap.
View 9 Replies View RelatedCorelDRAW X6 :: Partially Hide Outline Of Object?
Jan 7, 2013what methods use to only partially hide the outline of an object but without merging the two objects together or breaking any of the two objects apart(?)..i want to rest one object on top of the other and hide portions of the outline where the two meet, something like this: [URL]
View 4 Replies View RelatedCorelDRAW X6 :: AI - Object Not Exported If Both Outline And Fill Set To None
Jun 2, 2013Create new document, create rectangle, set outline to none, fill to none - and export to AI. (I use v8)The object is not exported if both outline and fill are set to none.
View 3 Replies View RelatedPaint.NET :: Edit Object - Add Outline To Its Border
Mar 6, 2011I have drawn my rectangle and clicked on something else, how do I click on the rectangle and change its properties ie: add an outline to its border
View 3 Replies View RelatedXara :: Get Outline Of Object To Take On Graduated Fill?
Apr 21, 2012I have Designer Pro 7. Is there a way to get the outline of an object to take on the graduated fill transparency of an object? The line goes transparent with the object's fill when a linear transparency is applied, but remains opaque with a graduated one. I understand that I could turn the outline into an object and then apply the transparency but if I have to edit the object later, I would have to repeat the process.
View 4 Replies View RelatedIllustrator :: How To Create Contour Outline Around Object
Jul 7, 2013I am new to Illustrator and use CorelDraw for a couple of years. I wanted to the know the equivalent to transforming a stroke into an object in Illustrator and how to create a contour outline around an object to be able to break it away to create its very own object?
View 10 Replies View RelatedIllustrator :: How To Outline / Simplify A Transformed Object
Sep 7, 2012Using CS5. I have a solid shape with a hollowed center (see far left image). I applied a transform effect to make it look "3D" by offsetting it slightly 32 times (see middle image. see far right image to see what it looks like selected). I want to simply have the middle image, but without all the paths and lines - I just I want it outlined. I tried to expand it, group it, pathfinder-add - nothing seems to work.
View 12 Replies View RelatedIllustrator :: Size Of Object Without Including The Outline
Jul 12, 2013I have a 100mm x 100mm grid set up with 10mm divisions. I draw a box 100mm x 100mm and snap to the grid. I then put a stroke of 1mm on the box and want to resize to 120mm x 120mm. The box will not snap to the grid accurately because the box is now 118.811mm and does not know whether to snap to the top or bottom of the box. This makes for horrendous mistakes in my artwork. I need to view the size of the box as 120mm x 120mm irrespective of the stroke width. I'm on CS5.5 but have CS6 here and will install it if it's the only way to solve it.
View 4 Replies View RelatedCorelDRAW Graphics Suite X6 :: Outline Width Of Object Set To 2 Mm
Nov 19, 2013I use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
CorelDRAW Graphics Suite X6 :: Object Fill - Outline Areas
Oct 14, 2013I am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
View 4 Replies View RelatedAutoCad :: Extract Projection Outline Of Nonsolid 3D Object To 2D Lines
Apr 25, 2013I wish to have outline/surface of those nonsolid 3D object convert or projection into 2D lines that can be use later.
For solid object, its can be projecting the surface by FLATSHOT command. But for nonsolid object, this command is doesn't work and showing nothing when I tried.
These nonsolid object probably copy/export from other software ie. some analysis software.
CorelDRAW Graphics Suite X5 :: How To Color Outline Of Closed Object In Different Colors
Aug 16, 2011How do you color the outline of a closed object in different colors in Draw . I have a green triangle which is part of a witches hat....... I have colored the outline in the same green as the fill but I would like to keep the bottom line (curved) black to define it against the hat brim. Is there a way to keep this line black when I make the others green......otherwise I have to draw it in again.
View 5 Replies View RelatedCorelDRAW Graphics Suite X3 :: Outline And Fill Properties Of Object On Task Bar
Jul 7, 2011I am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint bucket told me the fill color and a pen told me the outline properties.
CorelDRAW Graphics Suite X5 :: Convert Outline To Object Complex Font?
Nov 23, 2011How can I get the same effect as this without trying to convert outline to object, Corel freezes up trying to do it.
View 6 Replies View RelatedIllustrator :: Why Does Adding FX To Either Object Or Text Outline Convert Them Back To Pixels
May 12, 2012Why does adding a FX (Distort - Ocean Ripple) to text (converted to outlines) or a basic shape, change it back to pixels and blocky? Why doesn't it stay as smooth bezier curves? Is this a possible bug?
View 3 Replies View RelatedAutoCad 3D :: How To Print Solid Crisp Outline For Outline Of Arch
Jan 2, 2013Currently self teaching myself using 3D on a current project I'm working on. A cable stayed bridge having a span of 30 metres supported primarily by a single diagonal parabolic arch. The arch is square in section but rotated so it looks like a diamond along the arch length. To draw the arch I have drawn the arch sections at intervals along the centreline where it changes size in section 1.4, 1.2, 1.1 and 1.0m. I have then used the loft command to draw the arch using the drawn sections as the objects to loft through.
For the GA drawing I have a plan view and elevation. When printing the generated/ lofted lines are are pixelated and not very crisp or clear (not a solid line).
I have tried adjusting the visual style and shade plot, for each of the options and none of them are giving me a solid crisp outline for the generated arch. I have also had a little play using the visual styles manager but nothing seems to work and also tried maximum quality in the print options.
What do I need to do to print a solid crisp outline for the outline of the arch please, are you able to select the edges of the square and convert them to solid 2d/ 3d lines.
Arch Plots.pdf
CorelDRAW Graphics Suite 12 :: Make Outline Color Of Object Same As Fill Color?
Dec 5, 2011I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedCorelDRAW X6 :: Outline Width (outline Pen Window Or Property Bar)
Mar 29, 2013I am taking an online coreldraw class involving the rendering of a baseball with two opposing three-point curves.
Where can I find the button for the tab labelled " Outline width" or "outline pen window".
Xara :: Getting Red Dotted Outline Instead Of Usual Black Outline?
Mar 6, 2012when I use the shape tool and text tool I'm getting a red dotted outline instead of the usual black outline. If I draw a rectangle it's empty, instead of shaded in? How do I put things back to normal?
View 3 Replies View RelatedGIMP :: Coloring Outline Drawing And Removing The Outline?
Jan 10, 2013I have a black-and-white outline drawing that I want to color in using the "Bucket Fill" tool. There are two things I'd like to do to make it easier:
1. Is there a way to prevent Bucket Fill from leaking through small gaps in the drawing? Usually what happens is, I fill in one region, and then suddenly a much larger region gets filled in. I then have to examine the borders of the region for a small opening, close the gap with black, and then try again. Is there a feature that lets me say e.g. "Don't fill through gaps less than 4 pixels wide"?
2. Once I'm done coloring, I want to remove the black outline to make a more realistic, less cartoony image. However, it's tedious to go and paint over every segment of the outline with the color of its adjoining regions. What I want to do is essentially: Replace every black pixel in the image with the color of the closest non-black pixel. Is there a feature that does this?
Also, if there are third-party plugins that do these things, that would work just as well.
Photoshop :: Put Outline
Mar 6, 2009I put a picture in a background I made, but the picture of the person looks like the cut is bad and the cut looks bad because it's very sharp what do I do to change that?
View 3 Replies View RelatedPhotoshop :: How To Outline An Image
Oct 2, 2012I have a custom 'text' image - that is, some text that has had a bunch of effects applied to them. One noticeable effect is the wind, which is white (working from a black background).
Now the project I am working on this for has a mostly white background, so I want to have a thin outline of black around the edges of the image (e.g. around the wind effect). Is there an easy way to do this or any way at all (using Photoshop CS6, if it makes a difference)?
Photoshop :: Outline Around Objects??
Jun 23, 2008hey guys, could any one help me please. I been trying to get the outline as in the above image, but i just cant get it right. I tried adding a Stroke, but every time i get smooth edges, instead of getting them like the above image. Is there a way how to get the outline around the numbers to look exactly the same?
View 6 Replies View Related