Photoshop :: Optimal Hardware Specification Requirements For CS6
Jul 24, 2013
What are the optimal hardware specification requirements for Adobe Photoshop CS6?".Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
View 3 Replies
ADVERTISEMENT
Mar 21, 2014
I am looking for modern AI file format specification. In some old topics I saw that all specifications later than this one URL>.... Are they still being in secret? If so, are there any tools from Adobe that can be used in my application to parse AI files?
View 3 Replies
View Related
Apr 19, 2013
What is the concrete specification that need included in the drawing?
Send me the template if can..
View 1 Replies
View Related
Mar 27, 2012
create a usable template file that ATTEXT can use to extract attribute information from blocks. The goal is to construct a small building within ACAD (before the first piece of material is cut or even bought) exclusively from blocks with attribute information for each block and then to extract what will end up being a bill of materials and cost sheet. (in lieu of my normal approach of hand sketching, trial and error cutting and fitting as I go along).
I have read the manual 4 - 5 times, followed instructions exactly (or at least think I have), reviewed postings here (and then trying different way). Nothing works. I have even created a single block in single file with one attribute to simplify it. Anyway, same error comes back every time. The current, extremely simplified, PracticeExtractAttributes.txt (template file) file reads:
BL:MYBLOCK C01500
STICKNAME C01500
with MYBLOCK being the block name and STICKNAME being the tag name for one attribute from the drawing. Same error.
Note: although I use ACAD very infrequently I have been using it since (if I recall correctly) 2.56 back in the 80s and currently use 2000.
PS the ATTEXT will create a DXX file with the information in it (hence my conclusion the problem is in the template file), but that would require me to spend hours and hours writing code to parse the DXX file (once I had the format figured out) to get the info out.
View 3 Replies
View Related
May 11, 2012
By this way I would like to ask which version of photoshop will be for me best vs. my operation system and hardware power which I have on my MACBOOKAIR 11
2GB RAM and fast 64GB HDD with 288 MB Graphics card
I Think about CS5 and CS6 And the question is actualy:
In which version of photoshop will be the work comfortable for my macbook? (fast)?
View 2 Replies
View Related
Feb 9, 2009
I have too little free space on my hard drive. When that's the case sometimes PS adjustments,e.g. "liquify" will revert back to the original image. Given the CS3 runs OK will CS4 do as well or are the demands on the computer much greater?
My video card is an Nvidia Geforce MX 420-updated. The system is a 2.4 Pentium 4, the hard drive is 55 gb's.
View 4 Replies
View Related
Mar 15, 2009
I have given up hope on getting cs4 to work on my old computer (multiprocessor server board) but what about cs3? My system seems to meet the minimum requirements but I had no luck running cs4 and cs3 is not functioning properly. Can someone take a look at these specs and tell me if this system should run cs3? I know it is an old system but I have not had any problems with it since it was new and do not plan on getting rid of it any time soon.
Tyan Tiger MP (2460) AMD-760 MP Motherboard
2 X Athlon MP 1800+
2 gigs Kingston DDR registered EEC memory
ATI Radeon 9550 256 MB DDR memory, with updated drivers (openGL Support)
Windows Vista Ultimate
View 4 Replies
View Related
Dec 12, 2008
I have a GeForce 9800gtx. It does OpenGL 2.1 and Shader Model 3 but in the PS Prefs it still says I need to upgrade my driver(i have the latest one) and possibly my graphics card in order to import 3D objects. I use 3DS Max for my work
View 1 Replies
View Related
Nov 3, 2008
I realize that Adobe calls for a G5 or Intel processor-equipped computer to run CS4. Sometimes these requirements are not completely rigid or necessary. if a 1.25Ghz eMac with 4 GB RAM, 32 MB of VRAM will run CS4,
View 7 Replies
View Related
Jul 31, 2007
I am running Lightroom and photoshop elements with 16meg raw files and I am bogging down with an old Pentium lap top. I am going to purchase a new lap top this weekend.
It is my work computer as well so they only purchase Think Pads and it will have to run Windows XP. Does anybody have a recommendation on a Think Pad model? What Processor, Ram, and hard drive space would be optimum?
View 1 Replies
View Related
Feb 12, 2005
I need to buy a new PC and I want it to run photoshop well.
What about this:
MSI 915G intel chipset.
Pentium 4 3.0GHz LGA775.
Intel graphic media accelarator 900 on board, up to 224 MB.
512MB DDR400.
80GB HD s-ata 150.
What should I improve to get better performance?
1. Faster CPU?
2. Maybe AMD 64bit?
3. Graphic card AGP or PCI-Express? ATI, GeForce5 or GeForce6?
4. More memory?
5. Raid HD?
6. Anything else?
I'm not a pro in photoshop but I want to work a lot with it.
View 6 Replies
View Related
Mar 17, 2011
How to create my renderings in order to obtain the clearest, crispest result. For example, I created an invitation in PDN with a finished size of 3.7" x 6.7". I started with a canvas size of 11.1 x 20.1 so that when I reduced it down, it would retain the same ratio and as much clarity as possible. I did a "save as" in png format, then reduced it down to the finished dimensions. My final png was still really grainy looking, especially the text.
I am wondering if the original canvas needs to be set as something other than the default resolution of 96 pixels per inch. Should I have set that at a higher resolution setting? If so, what is appropriate? How large should the original canvas be in proportion to the finished size? What format will be best for clarity when producing the final image (i.e. png)?
View 3 Replies
View Related
Feb 27, 2009
My daughter is studying for her GCSE's and one element is Design Technology where she has photographic assignments.
anyone know if a letter of confirmation from her school confirming that she is a pupil there and is studying for GCSEs would be sufficient for Adobe's needs?
View 10 Replies
View Related
Feb 23, 2009
i want maybe go on 64bit version, but it is really faster than 32bit ? (link
to any banchmark ?) and what are advantge and disavantage ?
and what are the requirements Vista 64bit and that's all ?
btw did i need to purchase a specific 64bit version of CS4 , or it come with
the 32bit version ? or maybe it's a single *.exe how launch both ?
and finaly on a 64bit OS can i install both 32 and 64 Version of photoshop ?
(because i read that some's plugin do not yet support 64bit)
View 4 Replies
View Related
Jun 5, 2012
I'm doing a street reconstruction. project. Four blocks long with three cross streets. Is there an optimal corridor creation sequence? My first attempt didn't work out well, so I started over.
The cross streets do not extend except a few feet from the primary street, so I don't think I need separate corridors for them. I was thinking I could just use intersections extended out as necessary. Would it be best to...
1) Create separate corridors between the cross streets, leaving gaps for the intersections? This is what I did before. My reason for starting over did not involve this sequence.
2) Create a corridor segment --> create and attach an intersection --> create the next corridor segment (and attach, if possible) --> create the next intersection --> and son on until finished. It is my understanding that you can attach an intersection to one corridor on one side but not the other.
Create crossing / overlapping corridors then use them both to create an intersection.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 5 Replies
View Related
Jan 27, 2013
I'm trying to use the Video Studio X4 MPEG Optimizer. My problem is the Optimal project settings is grayed out. How do I get that option to work on my project. I am going through this book "Picture Yourself Making Creative Movies with Corel VideoStudio Pro X4". In Chapter 13 under Using the Mpeg Optimizer the instructions say to use that option. The project has been built in previous chapters as an ongoing project.
View 1 Replies
View Related
Aug 5, 2013
my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver?
View 1 Replies
View Related
Oct 31, 2005
After spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?
View 9 Replies
View Related
Jul 27, 2008
I'm looking to build a new system (X48 motherboard, Q9450 quad core proc, 8GB ECC RAM, Vista64). I'd like to run with only 2 drives to keep the system relatively quiet but realize that a 3 drive config would be better for Photoshop performance. I do some photo editing and Web work with Photoshop so I'm not working with very large files but I do tend to have a lot of files and apps open at the same time.
View 19 Replies
View Related
Dec 16, 2012
Are there considerations to keep in mind using gradients when the printer uses pantone? My concern is color accuracy throughout the gradient.
View 7 Replies
View Related
May 23, 2013
I need change Text style in ESKD Technical requirements, but I don't know how?
View 2 Replies
View Related
Nov 2, 2008
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
View 3 Replies
View Related
May 28, 2004
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies
View Related
Jun 7, 2004
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
View 2 Replies
View Related
Jun 17, 2008
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
View 3 Replies
View Related
Apr 29, 2013
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies
View Related
Oct 30, 2012
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
View 3 Replies
View Related
Aug 21, 2012
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies
View Related
Mar 8, 2004
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
View 4 Replies
View Related
Mar 21, 2007
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies
View Related
Dec 29, 2008
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
View 1 Replies
View Related
