I'm looking to build a new system (X48 motherboard, Q9450 quad core proc, 8GB ECC RAM, Vista64). I'd like to run with only 2 drives to keep the system relatively quiet but realize that a 3 drive config would be better for Photoshop performance. I do some photo editing and Web work with Photoshop so I'm not working with very large files but I do tend to have a lot of files and apps open at the same time.
View 19 RepliesI bought a full copy of Photoshop 7 some years ago and have bought all the upgrades right up to CS3.
Does that allow me now to purchase CS4 (when its released) as an upgrade to CS3 or do I have have to go back to buying a full copy of CS4?
I'm trying to even out skin tone and slightly change a hairstyle in a photo, Can anyone give me any advice on how to do this?
View 4 Replies View RelatedDoes anyone know how David Lachapelle creates the highly saturated style?
View 4 Replies View RelatedWhat are the optimal hardware specification requirements for Adobe Photoshop CS6?".Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
View 3 Replies View RelatedI'm planning to do some giclee prints involving scans of original watercolour paintings of botanical subjects. Because of the nature of the subject, 90% of the content of the image is actually the original art paper with nothing on it.
The 'nothing' still has a colour of course (creamy off-white), and when I print on to a similarly-coloured fine art inkjet paper I get a darker background than the original because I'm effectively finishing up with two lots of background. Is there a way I can make the background a lighter shade that doesn't involve use of one of the selection tools?
Im looking to buy a graphics tablet instead of using a mouse. Are all tablets compatible with photoshop, what is the best size working area to get and can anyone recommend me a tablet thats not to expensive as im on a budget.
View 2 Replies View RelatedI posted a copyright notice on my webpage asking people specifically not to abuse the copyright of my colourised images. These images are mainly 1900-1950's actresses, you know the sort of thing, Lillian Gish - Liz Taylor. Anyway, someone on the Louise Brooks forum said a friend had questioned my right to colourise these images in the first place, then claim copyright on what I had done. Now I don't want to be in the wrong, not to mention claim what I don't have a right to. Can someone "briefly" advise here. All I am saying, basically, is please do not use my work on your webpage, without asking.
If I have no right to ownership, should I remove my newly uploaded website and images? There are so many others on the net that I feel the "original" owners accept that's how it is. After all, I have never in 8 years of being online heard of any complaints, not to mention prosecutions.
How to create my renderings in order to obtain the clearest, crispest result. For example, I created an invitation in PDN with a finished size of 3.7" x 6.7". I started with a canvas size of 11.1 x 20.1 so that when I reduced it down, it would retain the same ratio and as much clarity as possible. I did a "save as" in png format, then reduced it down to the finished dimensions. My final png was still really grainy looking, especially the text.
I am wondering if the original canvas needs to be set as something other than the default resolution of 96 pixels per inch. Should I have set that at a higher resolution setting? If so, what is appropriate? How large should the original canvas be in proportion to the finished size? What format will be best for clarity when producing the final image (i.e. png)?
I'm doing a street reconstruction. project. Four blocks long with three cross streets. Is there an optimal corridor creation sequence? My first attempt didn't work out well, so I started over.
The cross streets do not extend except a few feet from the primary street, so I don't think I need separate corridors for them. I was thinking I could just use intersections extended out as necessary. Would it be best to...
1) Create separate corridors between the cross streets, leaving gaps for the intersections? This is what I did before. My reason for starting over did not involve this sequence.
2) Create a corridor segment --> create and attach an intersection --> create the next corridor segment (and attach, if possible) --> create the next intersection --> and son on until finished. It is my understanding that you can attach an intersection to one corridor on one side but not the other.
Create crossing / overlapping corridors then use them both to create an intersection.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I'm trying to use the Video Studio X4 MPEG Optimizer. My problem is the Optimal project settings is grayed out. How do I get that option to work on my project. I am going through this book "Picture Yourself Making Creative Movies with Corel VideoStudio Pro X4". In Chapter 13 under Using the Mpeg Optimizer the instructions say to use that option. The project has been built in previous chapters as an ongoing project.
View 1 Replies View RelatedAfter spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View Relatedwhen I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies View RelatedI am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies View RelatedI am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies View RelatedI scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
View 2 Replies View RelatedI have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies View RelatedA co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
View 1 Replies View RelatedJust downloaded Elements 11 and am extremly disappointed. What is the oldest version of Photoshop that I can run on Mountain Lion?
View 1 Replies View Relatedany editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop CS6, nothing happens...Photoshop does not open as it used to. I'd thought it might be Nik Collection trial or OnOne photo suite trial I'd installed, but I uninstalled both and restarted my computer, and the problem still exists. I'm using the current creative cloud version of both lightroom and photoshop.
View 1 Replies View Relatedi am going to design a Logo for one of my client. the logo will be like an rounded shield. URL....i can write the text on upper side of te shape which is "Center for Employment Training. Please see the image. on image where this text is written on bottom of shae "Skill Training. Human Development" how to write that text . i tried to wrap the text using Arc option but the text goes stretched.
View 2 Replies View Related