I want to eliminate ALL the white back ground leaving the Sportster Logo with a transparent background. Since this is a single color is there a easy way to eliminate all the white at one time.
View 1 Replies
Is there any way in Elements 9 to convert a color or color range to "transparent"? I want to change a white background of an imported image (a map) to transparent so only the non-white objects (lines and shapes) are present. The image is way too complex to select each area individually.
View 4 Replies View RelatedI have a solid green rectangle.
I would like to create several similar green rectangles at various levels of transparency that will perfectly match the color of the solid green rectangle. Is there an easy way to do this?
I have tried matching it by eye, and can get very close:
the original solid green rectangle is R:135 G: 174 B: 155
after making a copy of the solid green rectangle, say, 90% transparent, I can play with Hue/Saturation to get around R:136 G:175 B: 154, according to the eyedropper. But I don't see any way of fine tuning the RGB/HSB/etc. absolute values in the transparent version.
I must create one button and that button must be in BMP and must have transparent color and that transparent color must be fuchsia (#FF00FF), how I can set it for some picture who now have only transparent background, that is not this color (#FF00FF)...
How I can done it in photoshop or corel or fireworks?
I'm VERY new to PhotoShop and I've used the search feature here and can't find the answer to my problem. If this has been asked many times I apologize. I have a logo which I've scanned. It's just two colors, white and black. I'd like to make the white transparent and while I'm sure this should be easy I am unable to get it to work. Can anyone give me an idea how to do it.
View 2 Replies View Relatedhow to make the foreground color transparent for the life of me. In illustrator it is as simple as clicking a premade swatch that is transparent (other than that I dont know how to set it there either.) I mainly want it because I am trying to use the pen tool but a color keeps filling in between the lines.
View 5 Replies View Relatedhow do you turn an entire color throughout the canvas transparent?
View 2 Replies View RelatedI have a jpeg image with a white background. How can make the white background transparent?
View 1 Replies View RelatedHow can I convert all of the transparent (100% transparent) pixels in an image to a specific color?
Adding a color layer below is not the solution I'm looking for, because some pixels are partially transparent and I don't want to modify those ones.
I use the "select color range" feature alot to do things with specific color pixels, but that feature doesn't seem to work in this case.
I am creating bitmap images for a program, where the transparent parts of the image need to be represented by a specific color.
I have an image that has corners with partially transparent pixels. I would like to make a mouse-over image of this with the same same dimensions, only a different color.
How can I color this image a different color and still have the partially transparent pixels around the edge. Obviously, I would like the semi-transparent pixels to be semi-transparent of the new color.
I'm still not allowed to use the link vb, but let's try this: ....
I'm a bit confused about how to do transparent colors (with GIFs) with P 6.0. If I want a specific color to be transparent, how do I specify that?
Does IE support transparent PNGs?
I have an image that has corners with partially transparent pixels. I would like to make a mouse-over image of this with the same same dimensions, only a different color.
How can I color this image a different color and still have the partially transparent pixels around the edge. Obviously, I would like the semi-transparent pixels to be semi-transparent of the new color.
I have a solid color rectangle on a layer.
I would like to create several similar rectangles on different layers with different opacity levels (i.e. 90%/75%/50% etc), that will match the solid color rectangle exactly, when they are against a white background.
I used Hue/Saturation on the transparent rectangles to approximate the solid color, but the eyedropper shows that I am a of couple values off. Is there a way to accurately match these colors exactly?
It looks like merged-image-data in PSD files contains RGB data which is blended with white color (based on transparency). Is that correct for all versions of Photoshop/PSD? Can I disable it or change that color?
View 7 Replies View RelatedI'm trying to highlight a section of a Google Earth image that I brought into Photoshop CS6 using a transparent color. How can I do this?
View 1 Replies View RelatedI'm trying to color correct some strands of fabric that are underneath a semi transparent fabric. I've been trying to paint the strands and use opacity etc...to properly color correct them, but are there any good tricks to keep the illusion of the transparency of the overlaying fabric?
View 1 Replies View RelatedIn other words, I have a green patterned background, and I want to add a transparent triangle (which should then be the green background by making it transparent) over a white layer. To sum it up, I want the triangle to be filled in with the green patterned background over the white layer. How do I do this?
View 6 Replies View RelatedI am in the process of designing a clear label for my aftershave and would like to have the text on a solid color panel be transparent so that the liquid is visible. I would also like to have an outline (Line) tracing the font. I've been doing some internet searches for "punched out" and "cutout" text and the like but this process is using two solid color layers.
As it stands now, I have a transparent background, the panel as one layer, and the text as another layer on top of the panel.
I came across a process for Illustrator but was hoping that it could be done in Photoshop as well since I have everything already setup in PS. I did try the method described for Illustrator but I couldn't get it to work in PS...not throwing out the high percentage of operator error on this one.
i once exported images (blurred) without any background. I used these in flash afterwards.
I was shown how to do this with chanels or masks but i cant remember the procedure -
again - im looking to save (pict, tiff, ....???) files from photoshop WITHOUT a background colour and keeping opacity (transparent gifs are not good enough).
How do I make a selected color transparent in all frames of an animation in ImageReady?
I know how to do that frame by frame, but it's really tedious when dealing with a large animation.
I'm coming from Fireworks.A technique I use often in my ui work is to combine a texture with a gradient that fades the gradients color and the pattern to transparent.
In Fireworks, this can be done on a single layer with no mask. The transparency of the gradient affects the pattern.This is not the case in Photoshop. I am wondering how I can accomplish the same thing in Photoshop, while keeping everything vector.
I want to create a transparent text on a solid color background, and I need text transparency to go all the way to through the image (i.e. do not show the solid color background). I have the transparent background layer, the solid rectangle layer that occupies part of the image, and the text layer (with text element) on the top of the solid rectangle layer. How do I make text transparency to go all the way through? Here is a similar example for Photoshop CS, only in my case, the background layer is transparent (i.e. there is no picture): URL... Basically, I need to make the letters see through, so they show the background color on which the image will be placed. Is it possible to do in Photoshop Elements? I'm using version 9 on Windows 7.
View 11 Replies View RelatedCS6. I have this logo, red circle w/white letters and superscript 2. It's going to be printed on light gray fabric. I assume that I need to make transparent canvas and transparent letters (lu) so that it takes the gray color of the fabric and not the white background and letters of my file but when I rasterize type, save and open it again I cannot edit.
View 1 Replies View RelatedI'm in the process of prepping individual components of a design for Flash animation. I'm trying to apply a layer of #7C6844 with the color effect at 56% opacity and a layer of #999999 with the color burn effect at 12% opacity to the foreground image which has a transparent background. This task has proved to be rather impossible for me, but it seems like there should be a way to do it. I would use the wand tool > select inverse and apply the colors over top that way, but the foreground image has a lot of leaves and branches, so that method would be extremely tedious.
Is there a way I can select the entire image as a whole and leave out the background?
I'll attach the image and the desired result to further assist.
I have an image that I want to paste a question mark over. I found this clipart question mark. I would like to fill in the regions of the symbol with grey translucent color.
View 6 Replies View RelatedI've looked all over, and can't find what I'm looking for. It might be a feature that doesn't exist. Is there any way to "define" a color as transparent? It would be easier on me than erasing the pieces that I don't need.
View 4 Replies View RelatedIs there Anyway to make a whole single color (without attaching to other colors that are not that color) turn transparent?
View 6 Replies View Relatedis it possible to make a specific color transparent on a gif or png?
View 7 Replies View RelatedI have been working on colorization, by putting a transparent B&W image over the color background, all is good apart from when I do people and just want to show their eyes in color. Allot of the times eye color comes out wrong, for instance, when I did my daughter her eyes are blue but color came out brown eyes.
View 6 Replies View RelatedHow can I control the color of transparent pixels?
I save my image in RGBA (Windows bitmap). The RGB value of the completely transparent areas always turn completely black, and I want to control the color myself.
It may seem pointless, as the color is transparent, but I am using the image elsewhere (for creating mipmaps) where there is interpolation between pixels. Interpolating between 0 and 1 in opacity gives 50%, but the RGB part of the interpolation will mix with black, giving a dark halo.
I have been trying to make a forum signature, and I am using an effect that as a "side effect" makes the background black.
Is it is possible to turn the black background into transparency using a PDN feature or a plugin?
