Photoshop :: Loading A Workspace On Program Boot
Apr 23, 2006Does anyone know how to automatically load/reload a workspace on boot?
View 8 RepliesDoes anyone know how to automatically load/reload a workspace on boot?
View 8 RepliesI would like to wblock certain layers(0 and Marking) to a specific location as a DXF. In the routine I would like to have a prompt that asks me what the file name (not the path, including .dxf) is. The location I would like to write to is FXF/"filename".dxf.
View 1 Replies View RelatedAfter working fine for a couple of months the program won't boot up. It blinks off at "RIBBON", setting up working invironment
View 5 Replies View RelatedElements editor workspace will not load.
View 2 Replies View RelatedI have a custom workspace I like quite a bit. In X4 I save it to Users/Owner/My Documents/Corel Paint Shop Pro/14.0/Work spaces..... I believe that is the default folder. I had some trouble with X4 and reloaded it and lost my workspace, so I recreated it. So now when I look in there I see 2 workspaces, cleverly labeled workspace1 and workspace2 and described in the type as Corel PSP Workspace File. Well, no big problem with X4, but I opened it and had the default workspace.
When I go to load a workspace, it doesn't see the ones I have saved. I hit load and no workspaces show up (although I have checked in my preferences under workspace and the correct folder is listed.) If I hit load and then try browsing to it and again no work spaces show up. I have tried to save the current workspace under the clever title "test" and it goes into the same folder. Even stranger, when I go to load work spaces, the "test" workspace shows up. I created both workspace 1 and 2 in X4, not X3...... so what's up.... how come I can't load a workspace?
Curious as to how to load the 3D Modeling workspace so that I can access the editing features and whatnot without having to type in the commands. I have seen a few different questions dealing with this issue, they pretty much said to into the "custom user interface", click on the transer tab and then path to the support folder where you would load the "acad.cuix" file and drag the 3D Modeling Workspace over to the left hand side. The issue I'm having is that when I path to the folder with all the different ".cuix" files there isn't a plain "acad.cuix" file to be found and none of the other options offer any sort of 3D Modeling Workspace?
View 5 Replies View RelatedI created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies View RelatedWhen I try to drag an image out of project bin to an image in the workspace my program crashes. I have reinstalled the program but still doing this. All updates are done and I'm at a loss as what to do.
View 5 Replies View RelatedI just bought elements11, installed it and imported photos from folders, when i wanted to check/change preferences the program hung up 'loading' . my computer meets system requirments according to the box.
View 6 Replies View RelatedI don't seem to be able to run a set of my custom programsn that I have been runnning since R2009.
I get the untrusted location dialogue box, the commands have demand loaded into the registry but when I run I get unknown command or nothing happens and no text on the command line.I have tried Rebuilding the code to target R2014 and also turning off the trusted switch all to no avail.
"xref object blow up max on loading scene" thats all I can add only into the scene I have a CAT rig, some cylinders with skin,cloth,ffd modyficators. After importing and xref object i close max. Then, when I am trying to open max with xrefobject i get an error. I unchecked the "automatic update" option, with to effect- still max cant open the scene and gimme an error.
View 3 Replies View RelatedI just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View RelatedPhotoshop CS6 won't boot up!
View 1 Replies View RelatedI've found that, upon boot, Photoshop takes 7 minutes to load. During this time, it stops for a LONG time on "Finding Plugins" and "Building TWAIN Menu List...".
Through much trial and error, I have found that if you ~ out the beginning of a folder name, PS will not load the contents on boot.
So I renamed:
C:Program FilesAdobePhotoshop CSPlug-InsImport-Export
(which contains just TWAIN_32.8BA)
to
C:Program FilesAdobePhotoshop CSPlug-Ins~Import-Export
AND RENAMED
C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop OnlyAutomate
to
C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~Automate
AND RENAMED
C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~AutomateOnline Services
to
C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~Automate~Online Services
With this done, PS Cold Boots in 12 seconds, and warm boots in about 6-7. (AMD XP 1800 1.5Ghz, 1024MB DDR, Windows XP Pro).
I noticed that if you goto START > RUN > 'SERVICES.MSC' That the WIA (Windows Imaging Acquisition) Service is not started. WIA sounds like something PS would need to capture my Twain Compliant Scanner (Microtek SlimScan C6 US. Well, I tried to start it, but it times out, so I don't know if that's my problem or not.
If I dont' ~ out any folder names, PS DOES LOAD (after 7 minutes), but when I goto FILE > IMPORT > Microtek SlimScan (32bit)..., it takes another 2 MINUTES to bring up the ScanWizard for import into PS. Once I scan, the image comes in fine. But this is just WAY TOO LONG. Something is holding it up.
Also, when I don't ~ out folder names, I get all the commands on FILE > AUTOMATE. But when I do ~ out folder names, only 3 show up there. I'm not running any firewalls (software ones), I am behind a router, and am on Comcast Cable. I have NO plugins or any other customizations installed aside from the default install.
I have a small niglling issue with my copy of Photoshop CS3 on Vista Ultimate 64 bit and I never use to get.
For the past several months I have had to click the PS icon (usually in my quick launch) several times before photoshop will actually boot up. Sometimes I can get PS to boot up on the first click, sometimes 2 (usually) but other times I have to click it bout 6+ times before I see the PS splash screen and it starts?
However, PS is doing something on this non-booting clicks, cos my Task Manager shows I have several processes of PS running, but they all use significantly less memory than the actual opened PS. So for example, if I had to click 6 times, the one that is open may be using 71k, but all the other ones will be using 4k, I then manually stop those processes and PS works fine.
This isn't a major problem cos I can get PS to boot and function as it is suppose to, but it its somewhat annoying when I have to keep doing this process everytime I want to run PS.
My specs (incase its needed) are:
Windows Vista Ultimate Retail x64
Intel Q9550 @ 3.6GHz
4GB PC2-8500 Corsair Dominator Ram
1x 150GB WD Velociraptor 10,000RPM HDD
1x 1TB Samsung F1 HDD
ATi 4870x2 2GB Graphics Card
Also, incase it matters, I have a copy of Flash CS3 installed too, both PS and Flash are 100% legimate copies.
Wondering if anyone has tips on how to make a hiking boot worn out with mud on it, and look as though you "hiked it out" I have all the tools Adobe CS suite, Macromedia MX suite, Corel Suite. Any ideas out there?
View 9 Replies View RelatedPhotoshop CS will take approximately 7 minutes to boot if I don't goto:
C:Program FilesAdobePhotoshop CSPlug-ins
And place a ~ in front of the Imports & Exports folder (a ~ in front of a folder name will prevent PS from loading that folder's contents on boot)
The only file in this folder is:
TWAIN_32.8BA
Also, I have to goto:
C:Program FilesAdobePhotoshop CSPlug-insAdobe Photoshop Only
And ~ out the Automate folder (and the Online folder inside it) or I'll get another extremely long timeout on booting)
Does anyone know how I can re-enable these things?
The "ONLINE" folder got me thinking. I'm using a hardware firewall and a software firewall. But even when I disable the software one, I still get the long boots.
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI have just completed an update of a MacPro 3,1 by adding more RAM, going from 12-20GB of RAM, adding a 240GB SSD that is less than half full vs 7200rpm 1TB boot drive. I've also moved my LR and Bridge cache off the boot drive to a 60GB SSD eSata Raid 0 setup. I have increased my PS allocated RAM up to 71% of my total RAM or about 14GB, History state is set at 20 levels and cache levels @ 6 and cache blocks at 1024k. PS scratch is set to the internal SSD boot drive.
But PS CS5 is experiencing random slow downs and total stops where we can not do anything, including exiting the app. Mouse will work but we can not run actions or use tools then all of a sudden it just snaps out of it but it will still be slow. We can then quit PS and relaunch and for awhile it will be fine.
Is this possibly a RAM issue?
Because OS 10.8.2 was the worst update in Apple history, for the first time ever I decided to do the 10.8.3 update on an external boot disk before sacrificing my internal disk. I used Super Duper to make a bootable clone of my internal , booted from the external and then did the combo update.
The first app I tried was Photoshop CS 5.1. It tried to open but I got a window that said "could not inialize scratch disk because disk could not be found". After I clicked OK on that, another window said "could not open because disk could not be found" . I have never tried to open Photoshop any version from a bootable backup before and I don't know what this means. The scratch disk for Photoshop is set to be my internal drive Macintosh HD.
Why would it not find it? If I were booting from my internal and had set the scratch to the external it would find it. Why would the app be looking for itself on another disk?
After recloning my internal which is still 10.8.2, I have not yet booted from the external to see if the problem was somehow caused by 10.8.3, but I wouldn't be surprised if it was. People have reported the usual weird behavior of an upgrade already on forums, but not this paricular problem
I recently had to reinstall OS X 10.7.4 because 10.8 will not run on my Mac. After the reinstall, Photoshop cannot find any licenses and does not offer me any way to re-enter my registration key.How can I get it to recognize the key or remove it entirely for a reinstall?
View 1 Replies View RelatedOk got a new laptop, quad core and went to install the trial of Photoshop CS6 Extended and it will not boot into extended mode but rather the original Photoshop mode, and I know this by the splash screen with the circles and the fact there is no 3D menu. A friend did the same on his laptop (different hardware) and his booted into Photoshop CS6 Extended. We used the same Adobe Download Assistant to do our installs. My GPU is the ATI Radeon 6520G and it has support for both Open GL & Open CL. It appears in the Performance preferences with GPU checked and Open CL is selectable in advanced. Now my question is why can't I get into Extended Mode? Why can't we just force it to do so? I have seen this issue all over the place and it seems to be related mostly to ATI/AMD chipsets. I would like to try out the 3D options.
I even tried installing the latest ATI Radeon drivers which are beta 2.7, same issue.
Just a 'heads up' for anyone out there thinking of adding more RAM to their XP system and use the /3GB switch in their boot.ini to increase the RAM available for Photoshop:
If you're using an 'on the motherboard' video card there's a good chance it will no longer work properly (driver will fail to load). With the /3GB switch enabled the onboard video will no longer have access to the RAM it needs when it gets re-routed away from the system (that's what the /3GB does). The solution is to get a separate video card with its own memory.
This will affect some laptop users and anyone else who is trying to simplify their system by using the onboard video features that are common these days.
I'm not certain if this is the case with all systems. But I get the impression it's a known issue.
I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
Cannot find explanations as for most recovery seems to work fine regardless of where the scratch drive is set. For me it only seems to work if the scratch is set as boot drive, C:.
I became aware of this after recently adding an SSD to my system and accordingly setting the scratch disk to one of the other larger drives. After a photoshop crash there was no recovery - surprising as it had worked flawlessly in the past. I did a test, switching the scratch location among a few drives and seeing where the recovery files were written - the answer was C: drive. In any other location the PSAutoRecover folder was created, but no files ever appear there.
My boot drive has a bad block for the 2nd time in 6 months, so I'm going to replace. I will be cloning the drive via Mac Disk Utility to the replacement drive.
I don't want to waste any Activations, so do I DE activate prior to cloning and then Re activate after replacing the new drive? I assume this will count as only one Activation on one machine?
BTW, Adobe chat seemed clueless about this.
I just installed Photoshop CS6 on my wife's PC running Windows 7 Professional with all the updates.
In PS preferences I selected her internal D: drive (a non-boot drive), for her scratch disk. Now when I try to start PS it says I need to unlock her scratch file. What that file is called. I DO have adminstrator priviledges I cannot start PS so I can reset mer scratch drive preferences.
I have Elements 5.0 loaded on a hard drive which will no longer boot. I have a new hard drive and can access the old drive as an extra internal hard drive. I cannot use Photoshop, so I was thinking I need to deactivate the copy loaded on the old hard drive and reload it on the new hard drive. If so, how do I deactivate? When I start up the editor, it does not have an option for deactivating as I read about in another post. Under the help menu, there is a grayed out option for Registration. After a few seconds, a window appears saying there is a problem with my serial number and the application closes. Also, I would like to load Photoshop on a laptop later, so I do not want to waste one of my allowable loads.
View 4 Replies View RelatedMac OS 10.8.2. PS6 will not launch unless the boot drive is set as the number one option for the scratch disk. Even if I choose another internal drive and set it as the number one option for PS6 it will not launch. My boot drive is only a 120GB SSD so I don't want to use it as the main scratch disk.
View 13 Replies View Related