I recently scanned a poster but it was too big so I scanned twice to get the full of it. With PS7 I wonder if possible to re-join them as the original ?
I tried the "basic" way of copy and paste which is copying 2 parts into a new file but the outcome not look right.
I need to do something that I've done a hundred times before with simple image editors on my old Windows desktop, but now I have a shiny new MacBook Pro with an Adobe Creative Cloud subscription, so I'm learning to use Photoshop CS6.
I have an image someone sent me that has text at the top and bottom of the image and too much "white space" in the middle (it's not white, but work with me here). I want to cut that part out, to have the middle disappear and the top and bottom sections join.
how to make the middle disappear (I used the regular select instead of crop, selected the middle, inverted my select, and chose Cut). But the top and bottom parts don't join.
I asked my Photoship savvy co-worker and she told me all about making layers to do this and that, and overlapping (offsetting?) copies of the image. My ears began to ring. This CAN'T be so complicated. With the free photo tool on my Windows machine, I could highlight what I wanted to get rid of, press Delete, and it would remove that part of the image and join the top and bottom pieces.
I am trying to assembled these 2 parts but the elbow gives no options..how can i constrain the elbow to the straight pipe?
View 7 Replies View RelatedI am drawing up my house in Revit to get use to the software. I created my house, and now my garage. I selected to create a roof by footprint but when I tried to join the roof to the adjacent wall, the overhang does not follow. I then selected the overhang to join to the adjacent wall but an error pops up: "Part of the roof to be joined misses the target face."
I attached a PDF of the roof.Also, you will notice a line that separates the two walls I joined together. I may separate them but how do I avoid this if I want to make one solid wall?
As for the wall selection, I have vinyl siding and would like to use properties that relate when selecting my exterior walls. I do not see anything regarding that besides wood siding. I thought that should be in my properties when I downloaded and purchased the software.
I am trying to join two parts in their flat pattern state - either in the drawing or physically.
these two curved parts are adjacent but have different unfolding strategies so Inventor makes me seperate them. I would like to cut these parts out on my cnc as one piece - but I am having difficulty accurately joining these parts.
(one is a curved part & one is a twist - both can generate a flat pattern)
I can make drawing views of both parts in their flat pattern state but I don't know how to (or even if it is possible) to connect these two parts and export them like one piece. I have tried to export to .dxf & then import into a new part file - but that was a big mess.
I can import the .dxf into ACAD & then join them but I would like to keep as much in Inventor as possible.
The command to JOIN two overlapping anchor points as a SMOOTH join is not working (at least, on Mac).
"The join option only results in a corner join regardless of whether you select anchor points to join or the entire path. However, for overlapping anchor points, if you want the option to select a smooth or corner join, then use Ctrl+Shift+Alt+J (Windows) or Cmd+Shift+Option+J (Mac OS)."
Drawing: line, arc, line.
arc was defined with line's end points and radius, so I'm positive that this drawing is continuous.
Steps I take:
pedit
click
do you wish to turn into polyline
y
j
Select objects: 1 found
Select objects: 1 found, 2 total [enter]
Select objects:
0 segments added to polyline
[enter]
I had no problem turning other arcs into polyline...
I am exasperated by PS 7 again.
Someone has emailed me an old document in two sections (JPGs) and I want to "knit" them together again to make one document (JPG).
I've spent ages in PS7 trying to do this, to no avail.
There are two open spots in our corPSe (Pure CorPSe 2 ) and I hope that two of you shoppers can fill them.
View 4 Replies View RelatedI'm having a custom shape that I'd like to divide into 2 parts to mirror one of them and re-join the 2 parts.
View 2 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I know that while I'm working with an image if i hit the DELETE key it removes the last place point when using a lasso tool, but is it possible to undo the JOIN UP at the end of a lasso loop? If I press the DELETE key at this point it deletes whats inside the loop?
The problem is that I'm forever accidentally clicking too fast when using the lasso tool which automatically joins the lasso loop up. Is there anyway to UNDO this final step?
I am creating a vector shape and I was wondering how to join points. Here is a sreenshot so that you understand my problem better: Or is this just not possible is photoshop and I have to use Adobe Illustrator ?
View 1 Replies View RelatedI do book cover design use action script. There is basic PSD template, which has high resolution 300dpi and large image dimens. 2200 x 1450). I should insert a picture which has much lower resolution 96dpi and smaller size 430 x 640 pix. I need that this picture covered full area, i.e. had the same size as a front cover (at least same height). If I just copy and paste this picture it have very small size due different resolution and dimensions. If I just lower the resolution and dimensions of a PSD template to correspond my picture, this gives error when action script run (in Step2), and also it is inconvenient to work with small template. How to join template and picture correctly?
View 9 Replies View RelatedI am creating a vector shape and I was wondering how to join points.
Or is this just not possible is photoshop and I have to use Adobe Illustrator?
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedI have a panoramic picture made up of three photos and i need some tips on how to get rid of the faint lines visible from where the three photos join.
you can see this in the attached image. under the big rock and in the sky on the right.
I made this technical detail. To make an arc I use ''tan, tan, radius'' command. It looks like arc and circle is joined together, but if I move closer as you can see they aren't joined together. So how can I join them? I tried 'join' command but it won't work for me or maybe I don't know how correctly use this commad.
View 8 Replies View RelatedI have two roofs that I am trying to join. It consists of two Gables. The eaves and type of cuts are the same, but it still says they can't be joined. Attached is an example of what is happening. The shown highlighted image is actually what I am trying to achieve.
View 4 Replies View RelatedJust can´t find out how to join these 4 polylines:
Bank.dwg
I created many lines, and joined them together nicely..Now I have a closed complete 2D shape...I want to extrude the shape, but...
I think I need to join all the lines to become a single line first...I can't find this command... How can I unite all the lines together
I'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
I am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.