I have recently upgraded to Photoshop CS6 on MacBook Pro running OS X 10.8 and need to open a JP2 file that is 2.11 GB. Photoshop throws out an error message "...the file format module cannot parse the file". I would like to convert this file to a PSD file.
View 14 RepliesWhen trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
I am getting this popup error when trying to open a .gif file:
"Could not complete your request because the file-format module cannot parse the file."
This comes up every time I try to open a .gif file. Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error. I tried reinstalling CS4, but the error is still there. I have also done the reset on start-up and nothing. Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again. Did it and this does NOT work for me, either.
I am trying to open a image to edit in Photoshop CC. I am getting the following message:- Could not place the document ‘arrow_right_alt1-512’ because file-format module cannot not parse the file. I make this upper cover but when i put any image in the backgroud layer it shows me that Error
Image no.1
Image no.2
Image no.3
Image no.4
I am runing Vista Ultimate 64 bit with SP1 and whenever I use CS4 to read a .gif file Photoshop reports "Could not complete your request because the file-format module cannot parse the file".
I have un-installed CS4 and then re-installed again but I still get the same message. Can anyone please tell me what this means and perhaps help me to resolve the problem?
I have CS6 now but got the same problem in CS3
They are jpeg files and can be read by several other programs with no problem.
I cannot do a lot of work because this keeps happening.
When I export my 3D-project (a coffee mug) from Cinema 4D (R11) as a .3ds file to PS CS5 Extended I get the following message: "The Photoshop 3D file format could not parse this file".The odd thing is that when I export and import a simple sphere it works. I believe that there is some kind of limitation involved?
View 2 Replies View Relatedim trying to get som .png's to open in photoshop cs and it keeps giving me this error message.
"could not complete your request because the file-format cannot parse the file."
what does that mean?
Why can't my photoshop CS6 read my Nikon D800 (NEF) raw files? DNG doesn't work either. Lightroom (which I don't care for, does however? I get a "can't parse this file"
View 7 Replies View Relatedim trying to parse a CSV file and output XML for Illustrator;
[URL]
here is a sample file That works,
[URL]
Im trying to turn this
[URL]
into something that works in Illustrator
Previously, I had been able to add .aco color palettes to GIMP and use them. But they are suddenly no longer in my palettes menu and I'm getting this error for each one I had added (and used before):
Fatal parse error in palette file 'C:UsersChristina.gimp-2.8palettesTransitional.aco': Missing magic header.
I recently bought some brushes for Photoshop, knowing I could use them on gimp, but I keep receiving this message:
Failed to load data:
Fatal parse error in brush file 'C:Program FilesGIMP 2sharegimp2.0rushesKyleMegapack.abr': unable to decode abr format version 14402.
I'm not sure what is wrong. My best guess is that the Photoshop version this was made for is not compatible with Gimp 2.8.10. The guy who made these brushes (Kyle T Webster) said that Photoshop CS5 or higher is required. The brush set was only $13, so I'm not really worried about the money, but is there any way I can use these brushes, or will I have to wait for a Gimp update or something?
I understand Photoshop CS3 can open Illustrator .ai files.
When inside Photoshop, file/open, select .ai file, I get the following message:
"Could not complete your request because the parser module cannot parse the file"
This presents a huge problem because I have original artwork I need to send to the printers, but cannot get into it! It was created by another company on our behalf.
I have downloaded and installed the Camera RAW 4.5 update and it hasn't helped, the error still occurs.
Does anyone have any idea what is causing this?
I'm trying to attach a hyperlink to a PDF but I keep getting the error message " AutoCAD could not open this file or could not parse a fle of this type". It also won't link to a Word document or speadsheet, but will link to a web page and a notepad text file.
View 3 Replies View RelatedI have PSE 12, I am receiving the error message
"Online service encountered an error Error7. An XML parse failure occurred."
When I try to copy the below equation from notepad into a sketch dimension:
m_h*x4/(m_l^2)*(2*m_l - x4/NACA_c) + (m_t*NACA_c/.2*(.2969*sqrt(x4/NACA_c)-.1260*(x4/NACA_c)-.3516*(x4/NACA_c)^2+.2843*(x4/NACA_c)^3-.1015*(x4/NACA_c)^4))*cos(atan(m_h/(m_l^2)*(2*m_l - x4/NACA_c) + m_h*t/(m_l^2)*(-1/NACA_c)))
Inventor interprets it as:
m_h * x4 / ( (m_l) ^ 2 ul ) * ( 2 ul * m_l - x4 / NACA_c ) + ( m_t * NACA_c / 0.2 ul * ( 0.2969 ul * sqrt(x4 / NACA_c) - 0.1260 ul * ( x4 / NACA_c ) - (0.3516 ul * ( x4 / NACA_c )) ^ 2 ul + (0.2843 ul * ( x4 / NACA_c )) ^ 3 ul - (0.1015 ul * ( x4 / NACA_c )) ^ 4 ul ) ) * cos(atan(m_h / ( (m_l) ^ 2 ul ) * ( 2 ul * m_l - x4 / NACA_c ) + m_h * t / ( (m_l) ^ 2 ul ) * ( -1 ul / NACA_c )))
NOTICE THE EXPONENT TERMS, ex:
(x4/NACA_c)^3 vs. (0.2843 ul * ( x4 / NACA_c )) ^ 3 ul
Note, when copying into the sketch equation curve this error does not happen.
I'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies View RelatedHave some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
file info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View RelatedWhen I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedElements11: Trying to make a photo collage, but get the message : "Could not complete your request because the file was not a valid frame file". What does that mean? I follow the instructions given how to make a collage, but it comes to a halt when I try to import the pictures to the collage.
View 2 Replies View RelatedEverything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedTrying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's.File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies View RelatedAfter I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedAdobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View RelatedI'm new to photoshop. Why did some of my altered pictures not show up in the file? They appear as a blue file with PSD on it. You can see the pictures when you click on them in Photoshop elements 10 but not in your file.
View 5 Replies View Related