I'm doing some photo editing of a HDR combined photoshop file. I have a layer mask of my buildings. I copied the layer, now i'd like to invert the mask so that I can immediately start fiddling with the sky.
How do I invert the layer mask? I'm in 32-bit mode right now. CS3
I haven't changed any settings but everytime I press CTRL+G it just adds a group instead of layer mask!
View 6 Replies View RelatedAm I missing something very basic?? I am trying to invert a mask on a sculpt layer. I don't seem to be able to invert a mask on a sculpt layer.
I have a layer with sculpting on it an I need to separate it out into two different layers. I painted a mask for the parts that I want to mask out and then duplicated the layer. Now I want to invert the mask to reveal the masked out sculpting on the second layer but I don't see the "invert mask" function that I thought for sure was there. I see invert freeze but not invert mask.
Maybe it's because I have a mind-dulling headache today, but I'm just not seeing the way to either create an inverted vector mask or invert an existing one.
Â
For example, in the following layer stack, I'd like the vector mask on the group to create a transparent hole in the image, rather than make the outer part of the image transparent. Note that the [Invert] button in the Properties panel is unavailable (grayed-out).
Â
If I could have created the vector mask in the first place using the rectangle tool, but inverted, that would have been okay as well, but somehow the sequence to do that escaped me as well. I know how to do this with a selection, but I'd rather keep it in vector land.
I frequently encounter this problem across numerous versions of PS (CS4 - CS6)I like to CTRL+click on my layers to select them for convenience. If in the layers panel, I have a Layer Mask selected (that is, the white border highlight is around the alpha mask thumnail) and the mask is unlinked from the layer itself (there is not a link icon bewteen the layer thumb and alpha mask thumb), the CTRL+click feature seems to be disabled.
Â
I have to relink the mask to the layer in order to restore the functionality. This occurs regardless of the order of any of the layers in question.Is this correct?
Photo of boat in ocean. I want JUST the ocean as a layer-in the layers palette I would see the original image with a 'hole' in it-the boat would be missing. But when I use a lasso tool and copy to a new layer,
I a get new layer with the exact opposite- the original image with just the boat-the ocean is missing. Is there a simple way to invert this so I get the ocean as a layer? If not, how is the lasso tool used to get the background and not the subject of the photo?
How do I do this in CS4?
View 9 Replies View RelatedMy subject line pretty much sums up what I want to ask.
The thing is I've learned how to do both of them, but every textbook exercise I've done regarding one I found out that I can pull off with the other too.
Are they simply two different mechanisms for doing the same thing?
I am using photoshop cs2 and have a question about the Ctrl + LClick Layer Select feature.
In PS9, the function will highlight the layer within a folder. However, in cs2, it selects the folder that contains the layer.
Is there a way to make it like the older version of Photoshop?
-----edit
Sorry, let me explain myself better.
I mean, Ctrl + LClicking the actual layer on the canvas, not the layer palette/window.
In PS9, When you perform the above function, in the layer-palette, it highlights that specific layer for you. In CS2, it highlights the folder that contains the layer.
-----edit
In PS CS1 i used to be able to hold Control and click a layer to make the contents of that layer a selection but that don't appear to work in CS2.
View 2 Replies View Relatedjust starting using cs2 v9.0 and found out that the usual layer selecting by pressing ctrl and clicking on the layer did not work. it really drive me crazy. and why they change the linked layer feature, there are no longer little box to linked layers anymore.
ctrl+click thing
Hi guys, I have been using CS2 since its release but I didn’t discover this small nuance until yesterday, and needless to say it unnerved me quite a bit. In PS7 I used to use a trick to achieve a certain effect in some of my designs, making a pattern or single-color image on one layer, ctrl-clicking that layer to make it a selection, and then using that selection to delete other parts of my image. I liked this method as it allowed for me to save the particular selection, and always have that layer available to go back to in case of future use. Since I haven’t done graphic work in a while (mostly digital painting at the moment) I didn’t realize this change was made, either that, or I don’t know how to achieve a similar ends using CS2 that I did with PS7. If anyone understands what I’m asking, and can offer a bit of assistance it would be much appreciated, I am doing a menu layout and design for a local day-spa and I was hoping to do something interesting with their preexisting logo.
View 4 Replies View RelatedLevel: Newbie  OS: Win7 64bit  Ia: Cs6
Â
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
Â
And/or is all the artwork from then on inside the mask?
Â
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
Â
So, then I went and found a lesson that contained the use of a Clipping Mask.
Â
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
Â
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
Â
So, I have been trying to abate my problem in lots of different ways.
Â
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
Â
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
For some reason when I make a selection using CTRL+Click it never fully matches the cutout of the layer I am mimicking. There is always trim. I've posted a picture to best describe what is happening.Â
Fig A.
I've made a cutout using the background eraser. Because of this you can see how the cutout appears to be somewhat transparent around the edge.
Â
Fig B.Â
When placed on 50% gray the hair trim is as detailed as I wanted. It's a satisfying result.
Â
Fig C.Â
I now make a selected of this semi transparent cutout by cimply CTRL+Clicking the layer.Â
Â
Fig D.
I now duplicate the original (not cutout) and use this selection to cutout again (don't ask why) but the cutout doesn't match 100%. It's close, but it simply doesn't match. I've also tried using this selection to make a mask on the non cutout image and the edge is exactly the same.
Â
I thought some auto anti-alias may be turned on but I can't seem to find anything. I really need a duplicate of this cutout to match precisely.
when i select a text message an invert it, the whole picture gets inverted - waht am I doing wrong?
View 2 Replies View Relatedas the place I work at recently upgraded their PS version to CS6 and basically rendered my Intuos 4 completely useless because of the damn Alt/Ctrl modifier, which seems to control the "drag to create a copy of the layer function" regardless of the tool you're using.
Â
It might be specific for my region, but Alt+Ctrl or Alt Gr modifer is used in order to reach certain keystokes, such as ], [, @, so when by default the brush size function on my wacom is linked to a "[" (alt+ctrl+f windows function), my tablet completely flips out and starts sending a mix of Alt, Ctrl and Alt + Ctrl function controls instead of the [ which I'm trying to use.
Â
Alt + w/e functions work just fine, but I can't use any modifer using the alt+ctrl+w/e combo that involves creating a symbol, even while using the keyboard. For example, I can use the alt+ctrl+z command to undo something, but if I linked my brush tool to a "§", which is invoked by calling the alt+ctrl+m windows command, it will act as a normal ctrl + m command and open the curves window.
the key functionality lost is the ability to use the previous layer mask for a new layer
View 1 Replies View RelatedI can do one or another, but both at the same time? It is annoying because a mask selection turns into layer selection when you select a second layer/folder.
View 2 Replies View Related(CS3) I have a raster layer that has some semi-transparent pixels.
I'd like to make the layer itself fully opaque, and move the contents of its alpha channel into a layer mask.
(If possible, merging the alpha channel with what I have already placed into the layer mask.)
Is there a difference between selecting your layer and clicking Add Layer Mask Icon versus having that layer selected, hold down ctrl and select Add Layer Mask Icon?
Also regarding working in Lightroom, if I modify a jpeg, select another image from filmstrip to work on and then go back to the first image for more work, are those actions degrading image even though I never physically save and close.
I am using PSE 11 and need a hint as to how to duplicate the picture layer and then add a layer mask. Still trying to figure this thing out.Â
View 1 Replies View RelatedI've often been annoyed by the fact that that I need to go into the layer panel each time I need to switch between editing a layer and editing it's mask. Surely there must be a way to do this with a shortcut. I found a way to disable the layer mask in the shortcut menu, but this is not something I need to do that often. Switching between layer and layer mask, however, happens all the time - at least in my workflow.
View 4 Replies View RelatedI can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box).
Â
I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
I`m trying to swich a image on a layer whit a layer mask. I whant to keep the layer mask but change the image. When I paste a copyed image it the laye it creates a hole new layer. How can I change a image but keep the layer mask?Â
View 1 Replies View RelatedBasically exactly how layer masks behave, except I would like to be able to have full non-destructive editing control over the masking layer (e.g. have it as a smart object). The problem with layer masks is that (AFAIK) only destructive editing is possible.
What I'm after is effectively the same as what a 'luma matte' does in After Effects. Is this at all possible in PS?
I could have sworn that in previous versions of Photoshop, before version CS4, that if there was a link icon between the layer thumbnail and the layer mask on that same layer, if you move one or the other, they both move. In CS4, how do you move the layer pixels and the layer mask at the same time so that they stay lined up?
View 9 Replies View RelatedI have been trying to copy a mask from one layer to a new layer in Elements 11. I can do this in CS3 by using alt and dragging to the new layer. It doesn't work in Elements 11. Is this feature unavailable in elements 11 or is there a different command? there doesn't seem to be much point in spending all that time making a complex layer amsk and then being unable to use it on another layer.
I have to give a tutorial on layer masks using both CS3 and elements at the Camera Club!
Can I move smart layer mask to the smart filters on the same layer as a mask?
View 1 Replies View RelatedI'm trying to blend a photo with a background color. I select the new layer mask (selected), I select the gradient tool (color into transparent), and then draw a line to fade the image layer into the background later and it does nothing. Why isn't this working?
View 7 Replies View RelatedIs there a way to move a layer mask from one adjustment layer to another adjustment layer (within the same file), without removing the mask from its original layer?Â
(I can move a mask to a different layer by clicking and dragging the thumbnail, but the mask then disappears from its layer of origin). I'm using Ps CS5 on Windows XP.
I open something with paint and then I do crop and copy the area. Then I open up another document and paste it. Now I am trying to blend it in. I think I can use layers. Create a new layer, then add a layer mask. Then, at least that's how I have seen it online, I can use the brush tool to make the background reappear around the letters ( letters in my case). But this does not work. The brush only paints it in the background color.
View 9 Replies View Related