When I view an image with MS Office Picture Manager, it looks fine... but when I open it in Photoshop CS3, it has a yellow tint to it, and I cannot figure out why. Even if I go to my color palette and manually input white (#ffffff), the "white" it shows is a yellow tinted color. This only appears this way in Photoshop. Does anyone know what would cause this, or how I can get it back to plain white?
View 2 RepliesI'm using Lightroom 4.4 on Mac.
Â
Having an issue where all brushes and graduated filters are adding a warm yellow tint, no matter what the color settings are for the brush. The tint persists, even if I convert the image to B&W within Lightroom.
Title about says it... last night I noticed that images in CS, especially ones with blues, have a pronounced purple tint.
I've Googled the subject pretty exhaustively and came up with nothing except setting the color settings back to the default (which they were at), making sure the color profile is RGB (it is), and taking Adobe Gamma out of my startup group (I did).
Blues show up fine in ImageReady, just look purple in PS. Very weird.
How to do the red & yellow over the three images, I figured it was just a simple brush going over but I tried a bunch of times but it always came off looking horrible & cheap!
View 2 Replies View RelatedThe fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Â
Import screen - thumbnail view - OK:
Â
Import screen - preview - NOT OK:
Library view - NOT OK:
Â
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
 LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
I have an image that I'd like to give a coloured tint to, let's say pink. Similar to desaturating the colour of an image, but with a coloured tint.
View 4 Replies View Relatedhow to make watermark images that goes at the bottom right corner of Special Folders such as "My Images", or "My Music". They talk about image tinting :
"The large watermark in the bottom right of the folder is 150x150 pixels. It's designed to be anchored to the bottom of the page. Tint the image blue (R71G94B148) and screen back to about 12% opacity with an alpha channel."
I don't know how to perform this blue tinting on my image in Photoshop.
i dont believe its been like this the whole time i've had photoshop. but anyways. ANYTHING in photoshop has a bit of a pink tint to it. tho i can save whatever im working on, look at it with another app. and it will be fine. i have an example here.
right is the saved file. looks normal. left is the file viewed in photoshop, and has a pink tint to it.
I'm a Photoshop CS4 convert and until recently have been printing beautiful photos using my Canon Pixma MP800. Recently I got a new computer, a HP Z400 Workstation. Runs perfectly, except now I find that my photos are printing out with this disguting magenta tint. I've recalibrated the screen and made sure the proper printer drivers were selected, uuninstalled and reinstalled the printer drivers from Canon's website, unset and reset my printer as the default printer, checked all my print settings and color settings in Photoshop, made sure I had the correct paper settings selected and tried both Printer manages color and Photoshop manages color, all to no avail.I've spoken to Canon Tech Support and verified that the printer is printing correctly. I've printed out pictures that I've downloaded from the internet and that are in my Sample Photos folder in My documents and the color is perfect. But as soon as I go to print anything that has been through Photoshop, the magenta returns.
View 5 Replies View RelatedThe version they have is 5.5, every picture I load has a pink and black tint to it. The pictures will load fine in the windows explorer browser. I looked in the manual but had to idea where to start.
why my pictures won't appear correctly on the screen after loading them.
I went to Image -> Mode -> RGB but it didn't change. I am opening .jpg files.
I have recently installed CS3 and it seems every picture i throw in there will get a reddish tint to the skin of the person in the photo. Makes everyone look like they have a sunburn. I'm not sure if its some filter that is being applied or what. In the windows preview for this images I do not have this problem. Paint and Adobe Bridge CS3 also do not have this issue.
View 7 Replies View RelatedI try to change my color settings but no luck. I changed my RGB settings to my monitor's default, and that corrected them, but my grayscale images have a redish tint to them. where I can download a new color management file?
Here is what I mean...
Greyscale in Photoshop
Greyscale in Paint Shop Pro
I have taken several photos with an infared camera but for some reason when i have opened the photos they all seem to be very 'red'. These photos are important so i just wanted to see if anyone could offer me some advise on how to filter out the redness in photoshop to get the picture back to its original state.
View 7 Replies View RelatedI did a screen calibration earlier today.  And it went great and everything is perfect. After the calibration I decided to work in Photoshop for some retouching. Everything was great. I closed out and then restarted the program a little later, but now the photos are coming up with a green tint. But if I preview them in the Microsoft image viewer or paint or anything else they look fine.Â
View 3 Replies View RelatedI'm trying to change the color scheme on a model/figure I photographed, but I don't know how. I've done a search in the help field, but it pulls up a ton of unrelated articles.Example of what I'd like to do: I have a photo of a model jet that is red, black, and white. I want to change the red to blue without changing the overall look of the color. I'm not sure how to articulate this, but I want to maintain the hue, saturation and variation in the color. If I select and delete the red, then fill the area using the paint bucket the new color is flat and uninspiring.
View 6 Replies View RelatedRecently I noticed that when I print on a certain paper (Epson Premium Ultra Luster Photo Paper) that a blue tint is being printed on the paper along with the image. This seems to be occurring whether I use a standard .icc file or a customized .icc file for this paper. Am using Adobe CS5 to manage colors, rendering intent relative colorometric. Am using an iMac with 10.6.8. and Epson 3880 printer. The only thing I can think that changed is I upgraded from 10.5 to 10.6 a few months back. If you look along the sides of the image below you can see what I'm getting.
Just for the heck of it, I just printed the same image with Photoshop Elements 9, and I am not getting this blue cast.
I just bought a MacBook Pro three weeks ago. I'm running Mountain Lion. Also, I have my copy of Adobe Photoshop CS6.
Â
Something very unusual is happening. I'm a Graphic Designer and currently doing an Interior Design major. I calibrated my monitor perfectly. But now, ever since I installed CS6, every time I open Photoshop, a bluish tint sets on the screen, affecting every program running (browsers, for example) and it's very annoying (not to mention it disrupts any color calibration I made to my monitor). The only solution to this problem is closing Photoshop (the problem persists even if I minimize Photoshop to use another program).
Â
I tried opening Illustrator and it works fine. Only with Photoshop this is happening.
Â
I searched on Apple discussion boards for similar cases and found nothing.
Â
What's interesting, I took screenshots to send them to a friend and the screenshots don't seem to be affected by this phenomenon.
I would like to create like a blue filter to cover my picture to make them "blueish". so for example, a picture in black&white will become somehow a little more blue. if i have a picture representing a garden, everything should turn to blue tints.
View 4 Replies View RelatedI shot a photo yesterday which has a reddish tint to it. This “warm glow” is very important to the image and I put a lot of work into getting it right. The image was shot as a DNG and manipulate in Photoshop, I saved it as a .psd for further manipulation or correction.
Now that I got it right I lowered the bits from 16 to 8 and saved the .psd as a .jpg and it looks great in photoshop, can’t see the difference on my humble monitor. But when I open the same jpg file in another viewer like irfanview, that warm reddish glow is gone and there is slightly green cast over the picture which is totally wrong.
I tried it including the ICC and without, with save for web and save as jpg, always the same greenish tint which I don't see in photoshop.
How do I get a jpg with the same colors? I want to offer it as a print on redbubble.com, so I need a high quality JPEG with the right colors.
Since I've upgraded to CS3, I've had this problem. Every document I design in Photoshop will look perfect but will add a blue tint to the canvas when converted into a PDF. It will do this whether the file is a PSD or JPG. It doesn't matter if it's text only or text and a photo. It only puts the blue tint on the actual PS canvas area, so if the canvas size is 5x7 and the document size I choose for the PDF is 8.5x11 then the blue tint is only on the 5x7, not the outer edges of the PDF - it is white.
View 3 Replies View RelatedI'm trying to save the image in Photoshop under Save for Web. However, the optimised images always have a slightly yellowish tint.
View 2 Replies View RelatedI've seen color gradations in the tint sliders (which makes selecting exactly what color hue you're shooting for easier). Is this a feature only in CS3 and above (just like the histogram display in the curves palette)?
View 1 Replies View RelatedI am still baffled with matching the color - tint .
If I copy paste something on another image . I get crude red -green-blue + - world adjustments . I sample the color numbers to match still no luck . The saturation / Hue adjustments are semi helpful .
I end up with a flat gray bluish skin tone , Is their a color temp lighting corrector , talking from my kodak paper-photo printing 70s flashback years.
click path to fine tint / color correction for skin tones?
There is a specific CMYK combo of red I created that I want to use to tint a photo. How do I do that in the "proper" way?
View 8 Replies View RelatedWhen I try to type into a new box, the entire box has a red tent to it. How can I stop this?
View 4 Replies View RelatedLooking for a fix to blue tinted black and white images with my hp color laser.
I'm not sure if the problem is with the laser printer or with photoshop.
I began tweaking things up with proof setup, and when the "preserve RGB numbers" box is unchecked, the bluish tint is gone, but still the canvas was different from the original image because it appears to be slightly desaturated compared to the original image. The original image appears normally everywhere else, and that includes the photo viewer, the browser, the library, and such.
It even appears normally in smaller previews on the menu by the side and in the Adjustments>Variations box. The only difference is the canvas, and when I looked up the problem, it either had no response, or it mentioned monitor calibrating, and I've already tried that so I already know the monitor is not the issue! I even tried deleting the preferences file and relaunching Photoshop. The problem still persists. I have looked everywhere online, and I cannot afford clinking more urls.
Â
The text was only enlarged for those who have a hard time reading small text, or those who do not even pay much attention, for that matter. [[ and reverted by an admin who actually wanted to try and read what you wrote ]]
The original image.The photoshop window with troll canvas in the middle.The Adjustments>Variations window. Notice everything still is fine over here.Another proof setup option. Again, the canvas's trolling persists. Every setup option was either this or that dark blue tint.
I am using pse10 with an epson workforce 60 printer and everything prints out with a green tinge through it. Also the print is nothing like what is on my screen. I am using a Visi-sub icc profile for sublimation printing.
View 2 Replies View RelatedI can no longer 'apply a tint (one of the effects is the editor) to a photo.When I select one and click APPLY, I get a popup window that says:
Â
Plus members get online services, artwork and movie themes....Please sign in to upgrade to Plus.
Â
Well, I use to be able to use this feature and never got that window before.
Â
DO I NOW HAVE TO PURCHASE A PLUS application to supplement my PSE8?
Â
Also, when I try to sign in with the same Adobe ID that I use to get into this forum, I get another popup window that says:
Â
Photoshop.com services are currently unavailable. Please try again later or check your network connection. Error 400.
Â
I thought my password might be wrong, so I also used the 1st popup window to request that it be sent to me... and I got a message that says:An email has been sent to you .... but I never get the email.
I've got hold of some Welding glass to use as an ND filter on my Fuji HS20. It arrived today and works a treat. I do however now have a new issue that this has caused. I've set a custom white balance on the camera to counter act the tint from the glass. This now produces the correct colour on my jpg photo's however the RAW files have the wrong colour tint. When I open them in photoshop elements 11 I get the CAMERA RAW application. The white balance is set to 'AS SHOT' however the Tint is at +150. I'm guessing my problem is that the tint needs to be more than +150 and CAMERA RAW is limiting it. Does this mean I am now limited to using JPG's when I use this glass as an ND filter, or is there a way I can get rid of this limit to the tint on the white balance
View 7 Replies View Relatedhow an image I'm working on looks in photoshop as opposed to how the image actually looks. All my images look like this in photoshop. How can I stop this as it's really screwing up my work because I can't tell what it really looks like?
View 5 Replies View Related