Photoshop :: Image Re-sizing When Dragged Onto A New Canvas?
Jul 12, 2013I am using Photoshop CS5 on an Asus running Vista. What am I doing wrong? I am just dragging the layer and it is not retaining its size.
View 1 Replies
ADVERTISEMENT
Photoshop Elements :: Why Is High Resolution Image Pixelating When Dragged Onto Smaller Canvas
Aug 3, 2013I have an image (1200mm x 1200mm) very sharp and crisp. (A photo that i have worked on and has lots of detail) I drag this image onto a canvas size of 150mm x150mm - and the image loses all of its sharpness. It is not apparent until i zoom in to see the detail. (PSE10) I'm sure that there is a box somewhere to tick..........but i cannot find it.
when i drag it over, it is still the large size, so i grab the grips/handles and shrink to fit, then it pixelates?
Photoshop :: Re-Sizing Canvas Images?
Sep 20, 2013have a 3rd party illustration software program that can import my work into Photoshop (PSD). My probelem is with resizing my canvas in the 3rd party software for print needs. Would you reccomend Photoshop to assist me with resizing/scaling my imported image(s) for regular and larger professional print needs?
View 1 Replies View RelatedGIMP :: Canvas Resize Locked Into Proportional Sizing Only
Feb 3, 2012I need to resize the canvas for some custom work. All I can accomplish is to resize the canvas and then do a crop and paste to the correct size. Why is the canvas resize locked into proportional sizing only?
Is there another setting I could change? The added steps of cropping and pasting to get to the right canvas size is a hassle.
Photoshop :: Canvas Size Will Constrain Image Rather Than Cropping Canvas
Feb 23, 2012I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedPhotoshop :: Cursor Is Going Missing And Image Is Going Black When Dragged To 2nd Monitor
Jun 7, 2013I am on mac 10.8 and photoshop CS6. When I drag an image to the second monitor it goes black. When I drag it back to the main monitor it come back. Also on this computer often the cursor (in CS6 only) dissappears. It reappears when I pull the cursor down to the dock.
View 3 Replies View RelatedPhotoshop :: Use Clone Stamp Tool / Entire Image Is Dragged With Cursor / As Move It
Jul 8, 2013when I try to use clone stamp tool, the entire image is dragged with my curser as I move it. I reset to defaults to no avail.
View 2 Replies View RelatedPhotoshop :: Image Re-sizing
Sep 19, 2012Why can't I fix the size of my image in Photoshop? I try to make it, for example, 3.5" x 2.5", and have tried both the image size AND canvas size options. When I go and check the image size, it is 3.52" x 2.51", for instance. I've never encountered this before (using Photoshop 12 years now), and don't know how to fix this.
View 6 Replies View RelatedPhotoshop :: Image Sizing
Jul 28, 2006here's this picture. I need it to print at a 4x6. When I upload to order it with my lab online the cropping for the 4x6 crops out fingers etc. I've resized image tried several things.
How can I make this without losing my border, etc.?
Photoshop :: Image Sizing
Jan 17, 2005Why is the default size of the print so large? Should I change it to just print 4x6's or leave it? Why does Save As change the size of the file and can this be changed? My photofinisher uses a Fuji Frontier printer. I am ordering PS Elements 2.0 for Dummies of which I clearly am right now!!
View 8 Replies View RelatedPhotoshop :: Image Sizing
Mar 9, 2009CS4 Is not allowing me to size the images as I would like.
I have PSD files that I need to size at- in this instance- to 11" Wide X 8.5" tall. CS4 will not let me do this.
When I try to size the image to fit the size I need one dimension gets thrown off. As I do not want to distort the image, I try to crop. (Cutting part of the image that has to be sacrifised to fit the size needed.) That will not work either. CS4 will not allow that change.
Once again what should be a simple task has become a miserable CS4 experience. Hours of reading instructions and watching videos is of no help.
Sizing an image to a given set of measurments should not be so difficult (and so far impossible).
CorelDRAW Graphics Suite X5 :: Image Copy When Dragged
Mar 2, 2012I have a problem with each time I move a image, it makes a copy for the last position.
What setting would cause this?
Illustrator :: Image Moves After Dragged To A Specific Location
May 14, 2013I've been a casual user of Illustrator for many years, but have only used it at its most basic level. Now I need to begin using it more extensively to develop logos and what-have-you, and it seems that Murphy's Law has gone into effect... now that I need to use it, something has gone amiss.
I've been through Deke McClellands beginner training for AI CS4 and CS6, and I seem to recall this problem being addressed somewhere in that training -- but I can't find it.
So here's the problem:
After I draw a shape, any shape, and then click to reposition it on the artboard, when I release the mouse it snaps to a nearby location.
The shape doesn't stay where I want it to stay.
Smart Guides, Snap to Grid and Snap to Point are turned off.
Preferences > General > Keyboard Increment is set to 0.2 px.
Photoshop :: How To Get New Image Sizing Update
Oct 8, 2013how do i get the new image sizing update
View 1 Replies View RelatedPhotoshop :: Image Sizing / Resizing
Feb 17, 2012I need to make some new images for a jcarousel we've just coded into one of our sites. I have a number of existing images and logos that I need to drop into a 150 x 94 px size - I have a lot of these to convert.
What is the best (easiest) way to do this - they are all different sizes and formats. We'd like to end up with either gifs or pngs - if we make sprites we would need to keep the canvas size the same but knock the image size down to 150 x 47.
Photoshop :: Image Sizing + Percentages
Feb 27, 2006is possible to use percentages?
i have disabled "constrain proportions". i fill in W & H. photoshop automatically rounds up. my web designer has my thumbnails on my site (photography site) sized at W41.6 and H98.8.
Lightroom :: Image Sizing Dimensions - Wrong Image Size?
Jul 24, 2013Image Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
Photoshop :: Correct Watermark Sizing For Full Image Width
Nov 21, 2013I'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
Lightroom :: Image Sizing For Matting And Framing
Mar 26, 2009I need precise image sizing for matting and framing.
If I chose a width of 11.5 in Cell Size, why are my prints larger than that? Margins are 0 (which shouldn't matter anyway on 13" paper). I need .75" on each side.
My image is cropped to 2:3 ratio, same as my camera. What am I missing?
CorelDRAW Graphics Suite X5 :: Sizing Outline With Image
Aug 30, 2011Is there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
CorelDRAW Graphics Suite X5 :: Outline Sizing With Image
Aug 30, 2011When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
Lightroom :: 5.3 Image Sizing In Export Not Working As Expected
Jan 15, 2014When I export an image and specify the maximum dimensions in the Image Sizing section, Lightroom only honors the maximum width or height if both original dimensions are below the requested setting.
For example, I have an image with original dimensions of 2592x1936.
If I export using 1935x1935 in the Image Sizing section with option "Width & Height" or "Dimension", I get an exported file with dimensions 1935x1445. The "width" is properly constrained to the maximum value I've entered.
However, if I export using 1937x1937, the resulting exported file has dimensions 2592x1936--the original size of the image.I've tried the same with an original image of 1936x2592 and get similar results.
CorelDRAW / DESIGNER SDK :: How To Programmatically Lock Ratio Of Scaling And Sizing Of Image Imported On Curve
Jan 31, 2013I am a C# developer and not very familiar with coreldraw(when using with c#). My problem is that i am programmatically importing image on a curve using the following C# code.
d.ActiveLayer.Import(imgpath);// image path is path of the cdr file
var v = d.ActiveShape;
v.SizeHeight = 20.00;
v.SizeWidth = 15.00;
v.AddToPowerClip(s);
Now when i run this code the image gets placed into the curve bit it gets stretched vertically means the face of a student(that comes from imagepath) get stretched vertically..When i do this Manually with scaling and sizing ratio locked it gets properly inserted in curve....
Photoshop :: CS6 / Image Not Appearing On Canvas?
Sep 9, 2012I have both Photoshop CS6 and CS4 and they both are not opening the image. when I open RAW format files, they open up okay IN Camera Raw but when I am done in there and open them in PS the file displays for a millisecond on the canvass and then a black screen of hate pops up. I tried unistalling PS CS6 and that didn't work. I also tried reinstalling my newest AMD driver for my Radoen 6870 2G card but that didn't work. I then proceeded to update to Win7-Service Pack 1 update and that didn't do anything either.
JPEGS also do not display in PS as well. I am not sure but I think I might have to downgrade my disply driver to get this to work. My system specs are displayed below.
SYSTEM SPECSWindows 7 Ultimate Edition (64-bit) Service Pack 1 (Build 7601)
9.0.8112.16421
8192 MB
AMD Phenom(tm) II X4 940 Processor
2995.6 MHz
Speakers (Realtek High Definiti |
Speakers (TASCAM US-122 MKII) |
Realtek Digital Output(Optical) |
Realtek HD Audio 2nd output (Re |
[code]....
Photoshop :: Image Canvas Is Transparent
Mar 16, 2013I got a new laptop and the image is flickering. I changed the GPU drawing mode to basic
What is the drawing mode ? I changed my other laptop to get a better graphic card am i not using the card now this way?
Photoshop :: Image Canvas Flickers
Oct 15, 2013Image canvas flickers on windows 8 cannot do any editing already tried the following method what else I can do Have intel i3 processor with latest raphics drivers installed.
View 2 Replies View RelatedPhotoshop :: Image Weave 'In & Out' Of Canvas
Jan 3, 2007I have an image going across the whole canvas. I'm looking for a way to make this image look like it is weaving in and out of the canvas.
Here is an example of something similar. I need an effect that makes the blue bar look like its going behind the canvas, then coming back out.
Photoshop :: Trying To Drag An Image Onto Canvas Of Another, But...
Jul 21, 2004When I attempt to drag the image onto the "other" canvas (that has text) my red background on the "other" canvas goes black. I'm assuming it has something to do with the layering of the image I am trying to drag...but I can't seem to figure it out.
View 6 Replies View RelatedPhotoshop :: Crop Outside Image Once Inserted Onto Another Canvas?
Mar 26, 2012So I have an image which I have moved onto another canvas I of course know how to transform an image, but how can I crop the image Ive just moved? So lets say I have a photo of a man that is too big for the new canvas. OK I can use transform to resize it (holding down shift to keep it the same constraints), but then lets say he is still too tall. I dont want to stretch it down in size as he'd look like a midget, so I decide I only want to use the torso and head.
I would have thought I would have used the marquee tool to draw around it, Select>Inverse>Delete key
and this would delete whats outside the marquee box (his legs etc). But that doesnt work. Crop is of course of of the question as it then crops everything on the canvas.
Yes, I COULD resize it completely first, but I'd rather resize/crop it once its on the new canvas.
Photoshop :: Difference Between Canvas And Image Size
Jun 8, 2006I've resized a photo in Image Size but when opening Canvas Size, the dimensions have changed slightly. Why?
To get the printed size I set in Image Size, do I have to alter the canvas size or do I not need to bother with it?
Photoshop :: How Do You See Image Past Canvas Size?
May 25, 2006way to see your image passed the photoshop canvas size.
View 5 Replies View Related