Photoshop :: Image Sizing / Resizing
Feb 17, 2012
I need to make some new images for a jcarousel we've just coded into one of our sites. I have a number of existing images and logos that I need to drop into a 150 x 94 px size - I have a lot of these to convert.
What is the best (easiest) way to do this - they are all different sizes and formats. We'd like to end up with either gifs or pngs - if we make sprites we would need to keep the canvas size the same but knock the image size down to 150 x 47.
View 12 Replies
ADVERTISEMENT
Sep 19, 2012
Why can't I fix the size of my image in Photoshop? I try to make it, for example, 3.5" x 2.5", and have tried both the image size AND canvas size options. When I go and check the image size, it is 3.52" x 2.51", for instance. I've never encountered this before (using Photoshop 12 years now), and don't know how to fix this.
View 6 Replies
View Related
Jul 28, 2006
here's this picture. I need it to print at a 4x6. When I upload to order it with my lab online the cropping for the 4x6 crops out fingers etc. I've resized image tried several things.
How can I make this without losing my border, etc.?
View 1 Replies
View Related
Jan 17, 2005
Why is the default size of the print so large? Should I change it to just print 4x6's or leave it? Why does Save As change the size of the file and can this be changed? My photofinisher uses a Fuji Frontier printer. I am ordering PS Elements 2.0 for Dummies of which I clearly am right now!!
View 8 Replies
View Related
Mar 9, 2009
CS4 Is not allowing me to size the images as I would like.
I have PSD files that I need to size at- in this instance- to 11" Wide X 8.5" tall. CS4 will not let me do this.
When I try to size the image to fit the size I need one dimension gets thrown off. As I do not want to distort the image, I try to crop. (Cutting part of the image that has to be sacrifised to fit the size needed.) That will not work either. CS4 will not allow that change.
Once again what should be a simple task has become a miserable CS4 experience. Hours of reading instructions and watching videos is of no help.
Sizing an image to a given set of measurments should not be so difficult (and so far impossible).
View 6 Replies
View Related
Oct 8, 2013
how do i get the new image sizing update
View 1 Replies
View Related
Feb 27, 2006
is possible to use percentages?
i have disabled "constrain proportions". i fill in W & H. photoshop automatically rounds up. my web designer has my thumbnails on my site (photography site) sized at W41.6 and H98.8.
View 1 Replies
View Related
Jul 24, 2013
Image Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
View 31 Replies
View Related
Jul 12, 2013
I am using Photoshop CS5 on an Asus running Vista. What am I doing wrong? I am just dragging the layer and it is not retaining its size.
View 1 Replies
View Related
Nov 21, 2013
I'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
View 13 Replies
View Related
Mar 26, 2009
I need precise image sizing for matting and framing.
If I chose a width of 11.5 in Cell Size, why are my prints larger than that? Margins are 0 (which shouldn't matter anyway on 13" paper). I need .75" on each side.
My image is cropped to 2:3 ratio, same as my camera. What am I missing?
View 3 Replies
View Related
Aug 30, 2011
Is there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
View 6 Replies
View Related
Aug 30, 2011
When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
View 2 Replies
View Related
Jan 15, 2014
When I export an image and specify the maximum dimensions in the Image Sizing section, Lightroom only honors the maximum width or height if both original dimensions are below the requested setting.
For example, I have an image with original dimensions of 2592x1936.
If I export using 1935x1935 in the Image Sizing section with option "Width & Height" or "Dimension", I get an exported file with dimensions 1935x1445. The "width" is properly constrained to the maximum value I've entered.
However, if I export using 1937x1937, the resulting exported file has dimensions 2592x1936--the original size of the image.I've tried the same with an original image of 1936x2592 and get similar results.
View 1 Replies
View Related
Jan 31, 2013
I am a C# developer and not very familiar with coreldraw(when using with c#). My problem is that i am programmatically importing image on a curve using the following C# code.
d.ActiveLayer.Import(imgpath);// image path is path of the cdr file
var v = d.ActiveShape;
v.SizeHeight = 20.00;
v.SizeWidth = 15.00;
v.AddToPowerClip(s);
Now when i run this code the image gets placed into the curve bit it gets stretched vertically means the face of a student(that comes from imagepath) get stretched vertically..When i do this Manually with scaling and sizing ratio locked it gets properly inserted in curve....
View 2 Replies
View Related
Sep 3, 2008
All my images are 3008x2000, and I want to resize them down to a smaller scale for a web site. I know there must be a simple math equation to use to figure out what size would be safe where the images keep their proportion correct. In other words, at 3008x2000, if I reduce to 600x400, it looks out of proportion.
View 1 Replies
View Related
Mar 30, 2005
I want to take a screenshot and print it under 300 resolution, but everytime I paste it into Photoshop (after I take the screenshot via CONTROL+PRINTSCREEN button), it comes out as 3x2 inches, which is too small. I would like it to be 6x7 inches, but the only way I can think to do that, is if I resize the 3x2 inch image, to 6x7 inches. This makes the image a little blurry, so I sharpen it up a little bit.
View 2 Replies
View Related
Jul 30, 2009
I have just moved on to Ps in CS4 from Ps 7.
I have just opened up an image from a file in order to resize it for placing into an InDesign document.
The image is 16cm (1986p) x 15cm (1812) at 300dpi.
I resized it to 3cm wide at 300 dpi with the following boxes checked: scale styles/constrainproportions/resample image/bicubic.
But the image is very pixellated when reduced and taken into ID, even tho reduced in size from the original. I've done this dozens of times in Ps 7 abd never had this happen.
View 5 Replies
View Related
Mar 31, 2005
I want to take a screenshot and print it under 300 resolution, but everytime I paste it into Photoshop (after I take the screenshot via CONTROL+PRINTSCREEN button), it comes out as 3x2 inches, which is too small. I would like it to be 6x7 inches, but the only way I can think to do that, is if I resize the 3x2 inches image, to 6x7 inches. This makes the image a little blurry, so I sharpen it up a little bit.
View 3 Replies
View Related
Feb 14, 2009
I have an image that is very large. It is 4064 x 2704 px. I want to resize it so that I can use it for the header on my blog. I need it to be about 200 x 600 px. I have tried to resize it and when I do it becomes kind of blurry and distorted looking. I am assuming this is because of how large the image is initially.
is there a way to resize it this much and it still be sharp and not stretched looking.
View 4 Replies
View Related
Mar 31, 2005
I want to take a screenshot and print it under 300 resolution, but everytime I paste it into Photoshop (after I take the screenshot via CONTROL+PRINTSCREEN button), it comes out as 3x2 inches, which is too small. I would like it to be 6x7 inches, but the only way I can think to do that, is if I resize the 3x2 inches image, to 6x7 inches. This makes the image a little blurry, so I sharpen it up a little bit.
View 2 Replies
View Related
Jun 4, 2006
i got this image witch is small and has really small text in it i need to zoom into it so i can see the text with out making it unreadble!
View 5 Replies
View Related
May 3, 2007
i want to resize an image, i want to only change the witdth and not the lengh. I am using photoshop 7. When i go to "image size" and i type in the size of the width i want the image to be, photoshop automatically resizes the width and the length for me. Is there a way to resize an image that can allow you to change the witdth and not the length?
View 9 Replies
View Related
Aug 28, 2013
If I open a .psd file with an alpha channel and resize it via Image Size to a smaller version and then save it again, the alpha channel is no longer detected in the new .psd file. I've tried deleting the alpha channel and re-creating it but it just doesn't seem to get recognized as having alpha transparency when I open it in other software (e.g., Preview on OS X). (note: I'm using CS5). It's specifically only happening through a resize using Image Size and not via Canvas Size.
View 8 Replies
View Related
Apr 16, 2012
resize a canvas with 3D text.But want I want to know right now is how would you resize the whole image (make it smaller or bigger) with 3D text?Because when you make the image smaller, the 3D text stays the same size.
View 8 Replies
View Related
Sep 24, 2012
if this is a duplicate posting. I'm new to using this resource. Just want to be sure my question is getting to the right place for qualified responses.
Here is my dilemma. I'm very anal about this and was able to solve the problem in CS3. But I've lost the instructions. What I want to do:
When I resize (or resample) an image to 30 inches wide for printing I want the image on my screen in CS6 to be exactly 30 inches wide. Thusly I am able to see a true representation of my final sharpening.
As it is now... if I resize it to 30 inches it actually shows up at approx. 24-1/2 inches wide on screen. Any magical trick to adjust this in CS6 as I was able to do in CS3?
View 2 Replies
View Related
Oct 23, 2013
Why, when you downsample a picture (say from 300 to 72 dpi) does it look look pixellated, even though it is scaled down in Indesign and the effective DPI is well over 300.
I am using little icons that are clipped out photos they will be printed at about a quarter inch. These icons are on a bunch of calendars so they are placed in Indesign hundreds of times. Their actual size was originally about 5 inches at 300 dpi -- wayyyy larger than necessary for the final printed size.
I need to downsize them, without have to adjust each one in the ID document as they are already placed. I can do this by downsampling them in PS, from 300 to 72 dpi and not change the dimensions.But when I do this, even though they are so small in the ID document, they still look pixelated.
View 7 Replies
View Related
Nov 24, 2012
I've found that photoshop is distorting the image when resizing. If you have an image and you duplicate the layer, then with the bottom layer set its size (by free transform) to 99% (width and height), then set the top layers opacity to 50%, the image should be evenly blurred but it's not. It is in focus in the middle and blurred around the edges.
View 32 Replies
View Related
Jan 5, 2009
Is there a way to make an Action for batch processing to take a folder of various file sizes of photos and make them all retain there proportions but end up the same final size?
I am wanting to put on web quite a few photos but do not want to down size each one at a time. If I want them all to be about 200kb, how can I do that where a 5mb pic or a 500kb pic could all be processed with the same action to end up the same size?
View 2 Replies
View Related
Dec 16, 2003
I have placed a few images onto a background, I cannot seem to resize each individual image to my pre-determined sizes (for a business portfolio sheet) without also resizing the 'page' on which I'm trying to place them. I've tried image size, canvas size, transform, etc. but when I am in the specific layer trying to resize it, it still seems to resize the whole document (even though I didn't select canvas size).
View 2 Replies
View Related
Feb 23, 2009
Basically what I want to do is make a part of my image in the middle smaller without altering the rest of the image. I have tried to do this by selecting the part of the image I want to resize, and then changing the size of it.
The problem is that when I do this, I am left with all this white space in the area where the now smaller image no longer covers (I hope this makes sense). What I want is for the image surrounding my selection to "follow it" so to speak, and cover in where there is now white space.
View 4 Replies
View Related
