I have uploaded many files on my image hosting site, and I have a logo for a websit that I want to show you guys and for some reason it keeps coming up with the "red x" every time i upload it. So i tried a different image hosting site and it still doesnt come up....
View 8 Repliesrecent major PC failure and it's subsequent rebuild I've lost my IE Favourites list (note to self - backup) which contained a link to a good and free web hosting service to which one could add a link to in these forums e.g. screenshots. I've used this service as it was mentioned on this forum but for the life of me can't remember it's name -
View 5 Replies View RelatedI have inserted a recess paper towel dispenser into an interior wall. Then a 1/8" tile wall was added in front of the hosting interior wall. The opening for the recess dispenser only cut into the interior hosting wall, not the tile wall. I tried joining the two walls, but it didn't seems to have any effect. Is there any reason why the walls won't join?
View 4 Replies View RelatedIs it possible to host a central file in Autodesk and use it for worksharing?
View 2 Replies View RelatedCertain exterior walls ghost out / disappear in plan when hosting a split face. This doesn't happen on all walls, and it suddenly appears on walls that were performing fine.
View 5 Replies View Relatedif i want to make a background picture, for a normal site, what size pixels is it for it to be an exact fit?
View 3 Replies View Relatedwhy the sites spider count as trebled since the upgrade?
View 9 Replies View Relatedstyle flyer cards that generally are seen in and around night clubs and bars. I really dont want to grab random images around the net for obvious reasons. Does anyone know of any clipart sites of mainly photos of girls dancing, DJ's and everything in that field? Prefer a free service though I doubt there is such a thing but a cheap pay one will be fine too. Really dont want a "pay by the image" thing either.
View 1 Replies View RelatedI have a customer that has a drawing that keeps duplicating sites and putting feature lines on top of each other. What would be causing this?
View 9 Replies View RelatedI am new to civil 3d. I am building a site down the side of a mountain which consists of 4 tiers/ pads with different levels. Each of the 4 pads has its own feature line. To prevent any confusion or attractions of the feature lines to each other i have moved them to a site that i created called temp site locations.
What is the best way and location to do each of these gradings and how do i tie them all back on to the same drawing ? I assume (maybe wrongly) to do each separately and copy back into the the real drawing.
Do i need to create a new site for each pad. If i do my grading in the temporary site when i bring them back to the real site will the interact with the other feature lines.
My alignments have been created not under Sites and I am copying them to different Sites as needed. I am copying appropriate profiles along with them - an existing from surface and 1 proposed.
1. Should I copy the Profile Views? - will this create a copy of the profile view directly over the original profile view?
What are the benefits / disadvantages of copying / not copying the profile view along with the profile?
More importantly,
2. How do I turn OFF-ON copies of the alignments and annotation in my Plan View?
If I right-click alignment properties in a Site and set the Object Style to NO DISPLAY - this turns off the alignment, but not the annotation.
If I right-click on the alignment labels, Edit Alignment Labels - I am looking at a complex dialog box with lots of drop downs - a bit lost in here. What about a 1-click setting to NO DISPLAY the layers like I can find for the alignment itself?
Do I need to create/copy a bunch of new Styles? Not sure exactly where to go or start.
I brought a site into a drawing by LandXML which had 35 feature lines in it. How do you get the actual linework of the feature lines to show up in your drawing? It shows them in the site but the linework is not there.
View 1 Replies View RelatedI am having a problem accessing my FTP site through autocad because my user name is too long, and before you say anything no I cannot change it, its a company account.
It looks like the input box on the 'add/manage FTP locations' windows for user is limited to 26 creators which is a little odd. where the data is stored so I can either edit the information in text pad myself or if there is another way around it.
Move multiple feature lines between sites?
Is there a way to move all the feature lines in a surface from one site to another site all at once? I know how to do them one at a time, but when I select them all, right-click "move to site...", it does nothing.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
using Xara to make cartoons and illustrations for sale on microstock sites such as Dreamstime, Fotolia etc. Would the files produced by Xara be acceptable for these sites? (they seem to be fairly heavily biased towards illustrator, as far as I could make out). And is it worth trying to make a few bucks this way, or is the market already oversaturated?
View 2 Replies View RelatedI am just starting to use ilogic for some design files. We have two design sites connected with Vault Collaboration 2012.
What is the best practice for sharing the ilogic rules between the sites?
I was planning on making an ilogic rules folder at the root of my workspace and having Vault manage the external rules. However, I don't see the rules listed when I check-in a file that uses them.
Do I have to add the rules to my template files? If so, how do I make changes to the rules without editing every file created with the templates?
We will be moving to Vault and IV 2014 after the first of the year, if that makes any difference.
What is the most expedient way to import multiple sites (surveys) into one Survey database?
Could you import into seperate networks or would you simply import into different point groups?
We are trying to establish multiple surfaces for one project. We are using 2010 & 2012.
I am working on a project where I need to bring in multiple building site files from Revit as .adsk files to one Civil 3D model. The first building always imports just fine. For any building after the first, I get the following message:
"The selected file contains a definition of a building site that is already in use."
"What would you like to do?"
"Update the definition of the existing building site (cancel the import and use the selected file to update the definition of the existing building site.)" - THIS OPTION REPLACES THE FIRST BUILDING WITH THE NEW BUILDING I HAVE SELECTED
"Browse to another file (display the file browse dialog to select a different file.)"
My team and I have tried every we can think of including the following (see attached):
Renaming the files Moving the files to different folders Importing each building site into a new file and copy and pasting into the model (this works until someone tries to import a building site, which will inevitably happen and ruin this work around)Double-checking all related settings.
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View Related