Once a path is closed, how do you break it open? And while I'm at it: I have a vector mask. I want to draw another vector shape and subtract it from this vector mask. How would I do this?
View 5 Repliesi want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
Â
i searched all over the net for answers with no success.
I often use feature lines for parking lots and ponds. They're great when they work, but they drive me NUTS when they don't - which is a lot of the time. For parking lots and ponds, my feature lines usually close back on themselves. That's when I have trouble breaking the feature line. When I use BREAKFEATURE, I choose two points and this should, in theory, leave a gap in the feature line between those two points. That's not what happens. I end up with a huge gap between the first point I picked and a vertex point 5 or 6 vertices away. It doesn't matter where I pick the breaking points.
I've also tried TRIMFEATURES. I draw lines across the feature line where I would have chosen the breaking points. But the portion that I want to remove is the portion that always remains. It doesn't matter where I select the feature line to be trimmed (inside or outside of the cutting edges).
I think there may something wrong with the feature line itself. Sometimes, if I erase the original and draw a new one, it will trim just fine. But that's such a headache, and it doesn't always work. If I knew what was causing the feature lines to go squirrely, I would aviod it. Unfortunately, it seems like breathing the wrong way can screw up a feature line.
Is it possible to swap which side of a closed path - inside or
outside - masks a fill layer?
Let's say you draw a closed path with pen tool and then add a solid color fill layer which will be masked by the path so that the inside of the
path gets the color - what if you want the color on the outside instead,
how do you do it?
I draw a shape with the paths option using the shape tool,
Â
ive selected and highlighted a visible normal layer at full opacity in normal blend mode.
Â
right click the path and choose fill path... I have a colour selected already,
Â
nothing happens...?
Do I need to create a closed path first? Don't know how.
View 1 Replies View RelatedI am developing a plugin for Illustrator CS5, 6. I have a scenario which requires the plugin to place a text frame inside a closed path art. How can I calculate the proper destination coordinates? The path art can be a curve or a rectangle, any shape. I need to place the text frame inside the path such that no part of the text frame overlaps the boundaries of the path art.
Â
I looked at the forum and found the following thread: [URL] .....
Â
Here, its stated that the method AIPathfinderSuite::DoFrontMinusBackEffect of the API did the required task. I tried the same but couldn't get it to work.
Â
My first preference is to use the Illustrator SDK, not any third party libraries.
Is there any way to make vector text bear the characteristic of "closed path data"? Perhaps prior to, or after, applying the text in PSP? I am trying to import files from Corel PaintShop Photo Pro into MotionStudio 3D.
I am able to bring in vector objects created, but is there a way to make it so that vector text works also, by making vector text "closed"?
I would like to apply a gradient inside closed path with black at the outside transitioning to white at the center. I
View 2 Replies View RelatedI'm using Illustrator CS6.I'm working with closed paths on an illustrated character. I have a leg overlapping a body for example. The leg is essentially a 4 sided shape but I only want a stroke on 3 sides. On the 4th side I don't want a stroke on it so that the leg blends with the body. I first thought about using the shape builder tool to merge the 2Â shapes to see what that would look like but they won't merge for some reason.
Â
Then I tried to use the width tool to drop the stroke on the 4th side down to a 0 width for the side I want ... but that didn't work either.how I can change a closed shape so that a section of the shape has a different stroke colour (i.e. none!) from the rest of the shape?
I have a stringy object which is a single closed path. The fill disappears where it overlaps itself. Can I prevent that?
View 4 Replies View RelatedDraw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
Â
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
I've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Â
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
 The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically. Â
Â
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
I'm using Illustrator CC. When I draw an outline with either the pencil tool or the paintbrush tool, I can't fill it in with color, even though the path appears to be closed. The "fill" square has a red diagonal line through it and won't switch to a color.Â
View 11 Replies View Relatedbrushstrokes.png
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
I have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
Â
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
Â
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedHow to break the PDF file into images? There should be settings in Photoshop CS 6 that imports PDF file and break it into images. I have a short instruction:
2. Open the file in Photoshop. 3. A new window should open to Import PDF. Click on images, not pages import pdf into Photoshop.doc 4. Select all the files shown (shift + click), Click O.K. Four files should open on your screen.Â
Just started using the Configurator,My first attempts at tool tips often get lengthy. If the width of the panel is not wide enough, resulting tips get truncated/munged. Is there a way to insert line breaks in tips so that they can be seen in total on a "skinny" panel?Â
View 1 Replies View Relatedi was thinking maybe illustrator, but im sure theres gotta be a way to make a very detailed look such as that. i have no scanner to make customs, and the search results gave me a useless post selection.
im looking mpore at the paint mess more than the broken up lettering.
that possible with photoshop
break apart a pice of text to single lines?
I used to be able to do a "soft" line break in photoshop by hitting "shift + enter." it's not working anymore-- it's only giving me a "hard return".
are we no longer able to do soft breaks in photoshop anymore?
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View Related