How to break the PDF file into images? There should be settings in Photoshop CS 6 that imports PDF file and break it into images. I have a short instruction:
2. Open the file in Photoshop. 3. A new window should open to Import PDF. Click on images, not pages import pdf into Photoshop.doc 4. Select all the files shown (shift + click), Click O.K. Four files should open on your screen.Â
I have an image of political boundary map that I want to break up so that I have an individual image for each unit, such that I could combine them back together and get the original map. For purpose of illustration, let's say it's a US state map.
I know that I could take the original image, erase everything but Washington State to alpha, save that as Washington, then undo back to the beginning, erase everything but Oregon to alpha, save that as Oregon, undo, etc, until I had all 50 states, all in the same position as on the original map. I could then easily create images of arbitrary groups of states by just combining the images of the individual states I wanted to be in the group.
But getting to that point would take 50 manual erasing for a state map, and many more on my actual map. Is there a way to break up the map in an automated way?
The map image has the boundary all in one color that isn't otherwise present in the image, so it's easy enough to select just the boundary .
Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
I have a wall section that needs to be at 3/4" scale. It doesn't fit on the page but any way to make break lines at the windows and shorten it.
View 4 Replies View RelatedI sometimes need to export artwork from Flash, then edit it in Illustrator or simply save it as an .ai file for other people to use. I used to simply export an .eps file from Flash which worked perfectly asided from sometimes needed to readjust transparencies. However in CS5 I only have the FXG option - this makes editing artwork a long drawn out process of selecting movie clips and clicking "break link" then doing the same for the contents of that movie clip. Using "select all" on the artboard will not give me the break link option if anything other than a movie clip is selected.
View 2 Replies View RelatedWant to break/cut a line which is in reference file.
I know MicroStation has this function called "mask". Does AutoCAD has similar?
I have text in a frame with a table in it, connected to a Word file. Every time I try to copy text in it, InDesign goes into a loop while it refers back to the original file. It does it a bunch of times, I assume (but don't know) once for every row in the table. The loop takes three or four minutes to complete and there's nothing I can do until it's finished... I want to break that link and just have it as a normal text box, rather than a placed one. How do I do that?
View 3 Replies View RelatedThe imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies View RelatedOnce a path is closed, how do you break it open? And while I'm at it: I have a vector mask. I want to draw another vector shape and subtract it from this vector mask. How would I do this?
View 5 Replies View RelatedI have installed PS CS6 and updated it to 7.2. I can see my images under Bridge file icons, but under PS file icons, the images are generic. What do I need to do in Photoshop? What does Bridge have that PS does not?
View 4 Replies View RelatedI want to know how to add multiple images into one file/one image, both horizontally and/or vertically. Check out : [URL] .........
Â
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
Â
I want to know how to add different pictures/images and put them into one picture.
Just started using the Configurator,My first attempts at tool tips often get lengthy. If the width of the panel is not wide enough, resulting tips get truncated/munged. Is there a way to insert line breaks in tips so that they can be seen in total on a "skinny" panel?Â
View 1 Replies View Relatedi was thinking maybe illustrator, but im sure theres gotta be a way to make a very detailed look such as that. i have no scanner to make customs, and the search results gave me a useless post selection.
im looking mpore at the paint mess more than the broken up lettering.
that possible with photoshop
break apart a pice of text to single lines?
I used to be able to do a "soft" line break in photoshop by hitting "shift + enter." it's not working anymore-- it's only giving me a "hard return".
are we no longer able to do soft breaks in photoshop anymore?
Never used Photoshop before.
Â
I have an image which contains 4 images in a PSD and want to extract them into seperate images so i can upload them to my website.
Â
I guess this is very simple but i don't know which tool to uyse because there's too many
I'd also like to remove the text from within each image and save them as seperate png files
Photoshop is opening my files but doesn't display the image unless I drag the window.
View 3 Replies View Relatedthis morning photoshop decided to play up and any new images that i try to open to edit, i get this message. 'Could not complete your request because the file was not found'.   The same problem occours with all file types except .psd files. I have tried uninstalling and reinstalling photoshop with no luck.
Â
And incase its relavent, each time i click open the 'enable:' option is blank and 'Format:' is set to photoshop by default. With these settings all files in my finder and greyed out, so i change 'enable' to all readable documents which ungreys them. But when i open them, i get the message mentioned at the start.
storing and backing up large numbers of images? I need to accesses them on a regular basis and at reasonable speeds. This would be primarily Macs on a network. I need 3 terabytes of storage and an additional 3 of RAID or similar backup. For budgetary reasons the MAC X Serve is not an option.
View 4 Replies View RelatedSurely this is possible, but I've yet to figure out a way to do this.Can it be done?It would make it much easier to review/scan your library contents.
View 2 Replies View RelatedI'm having trouble with editing RAW images from my Nikon D3000. I've downloaded the DNG Converter from Adobe and converted all my files to DNG. However, when I opened them on Photoshop Elements 4.0, they turned out VERY grainy! (Even though all the shots are clear when viewed on my camera)
Â
Also, I could not save my files as JPG (After converting them to DNG). The only options were TIFF, PNG, JPF (?).
I'm using an international English version (I think) of Adobe Photoshop CS6, and I'm making a catalog that has Chinese type in it. I've encountered a problem with the paragraphing in that new lines often begin with periods or commas, and lines sometimes end with open brackets.
Â
Is there a way to set line break rules for Chinese fonts? I'm using an OpenType font (Adobe Heiti), but I can't find the options to change the line break rules.
I'm doing a gif animation in PS and have five pictures that I need to have as layers on the top of each other. At the moment I'm opening them and copy-pasting them on one of the images to make layers, but this is slow and sometimes confusing with all the images open at the same time.
Is there any way to just tell Photoshop to open all the files so that they are automatically stacked on the top of each other as layers?
why the size on disk of uncompressed indexed color images is always slightly larger than you expect it to be? For example, a 100x100 pixel image, 4 bit indexed image with a 2 color palette: the file size should be 5,000 bytes (4 bits for each of 10,000 pixels) plus 6 extra for the two colors in the CLUT - i.e. 5006 bytes. Yet the actual size is 5,268 - not a figure that squares with any size of palette! Ditto a 200x200 image, 8 bit colour: 40,000 bytes. Plus a full 256 colour CLUT at 3 bytes each, an extra 768. total size 40,768. on disk it is 41,080 bytes - an extra 112 bytes.
This is on a PC - not a Mac 'resource fork' issue. Is there some additional header info that Photoshop attaches to indexed color images -
I've read that among the new functions Adobe added to the CS File Browser is the ability to sort selected images on a number of fields, for example date/time created, file size, image width, height, etc.
Question for CS users who use Batch...
Once images are selected and sorted in the desired sequence using the CS File Browser sort function, does this mean that when one invokes the Batch dialog (either from the FB menu or the File > Automate menu and Source=File Browser) the images will be batch processed in the sorted order?
In PS7 (and earlier versions) the order of batch processing has always been in alphabetical file name order.
When I scan old film to create digital files, I put them in a folder with the file name ending in a sequential number ( 1, 2, 3, etc). Sometimes, when I open the folder to work on the image files in Photoshop Elements 11, I find the files list in the proper sequential order, but other times, especially when I have recently had some files open, the files will be listed in the order that I last opened them. How can I force PSE 11 to always list them in numerical order upon opening the folder?
View 3 Replies View RelatedI have been trying to save images from one file to a final modified one. Two problems:Â
1) Some images are unedited and save sometimes but not always. Why?  Â
2) Some are a combination of an original plus a transformed close-up from another image. When the finished edited image saves, it is much smaller than the few unedited images that did successfully save. Why?
Â
The images are digital photos of my jewelry. In order to decrease the number of pages on my impending website, I am attempting to transfer, when one is available, a resized close-up to the other shot of the full set (close-ups are what sell the work!). Some of the images show 25% on the top bar but that doesn't seem to make a difference as to whether it will save or not. Others (I notice they seem to be more horizontal images) are 16.7% ? I tried to upload example images to illustrate what I am trying to do but kept getting an error message.Â
how can i view all of a 200mb tiff file of scanned images in Ps? "windows photo viewer" opens all 5 pages of the tiff file. Ps appears to only open the first page of images. how can i view all 5 pages of images in Ps.
View 3 Replies View RelatedI am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
I'm an animation intern working for an animator who does things old school.
She gives me hundreds of animation cells to scan using her scanner into photoshop CS(nothing), using the scan utility in photoshop. the result, as we are doing it, is hundreds of separate image files. i then copy and paste each of these image files into another custom sized file as separate layers.
i know there must be a way to automate this or do it with an action, but i cannot figure it out. if you think this isn't possible with photoshop CS(nothing) i have CS3 available to me on my personal laptop.
How can I get Elements 9 to show me thumbnails of my large file images? When I tweak them with CS5 Elements won't show them in the Organizer.
View 4 Replies View Related