I have a CMYK colour image which I'm using for a Yellow Pages advert. However I'm only allowed to use one colour for the advert.
So I need to convert this image to tints of that one colour.
The colour available is CYAN and the tints are: 100%, 80%, 60%, 40% and 20%.
How do I do it.
I'm experiencing a strange problem in Elements 10:
When I'm in a new file, if I go file-place and select an image it automatically tints the image into black and white. I recently used this option in the program and it almost seems like the function is stuck!?
My only option now is to re-install the software.
Everything is brown. It goes from white to brown to dark brown to black.
Here is an image I got by screenshooting twice.
If I draw a shape and select the fill color from one of my swatches, this applies the color OK. Then if I want to change the fill color to a tint of the swatch, what I used to do in Illustrator 5.5 was go to the 'Color Guide' tab and choose a tint. This tint was then applied to the shape. If I do the same in Illustrator CC, I can select the tint, but it does not get applied to the shape, the shape remains with its original fill color. I use tints of our company colors a lot, so I need this to work!
View 6 Replies View RelatedIn CorelDraw x6 if i draw a box & fill it with a color from the default RGB or CYMK palettes how do i then adjust the tint of this particular color?
If i open the uniform fill box there is a tint slider ...but it's nearly always greyed out?!
CS5 has bad color, and cannot see light tints. The computer used to be a freelance computer, so all the settings were probably messed with. So far I
Deleted /Users/<username>/Library/Preferences/Adobe Illustrator CS5 Settings/en_US*/Checked both use the same color settings, see screenshots
In Bridge CS5 synchronized settings to North American Gen Purpose 2Overprint prefview is on in both CS5 (left, CS6 (right) background has dark pink pattern.
using brushes in Illustrator 5.5, I cannot find a way to change the "tint" of an art brush to a solid color. I have dragged the brush from the brush library to an ai document to try to modify it ...no luck. I have expanded the brush to art outlines ...no luck. I have expanded the transparency. All color and transparency panels indicate 100%, however the object is still a transparent tint. I have tried cutting and pasting the expanded object without luck.
I have read the reference manual on this subject, but nowhere does it tell how to remove the tint and make the newly created object a solid color.
how i can make the body color a few tints darker.
View 3 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View Relatedworking in CS6, OS 10.6.8. I'm working on a 3-color screen print CD label, and the colors will be a white background, plus black and a PMS color. I've been recoloring some CMYK artwork to use in the design, and really liked the results of Recolor Artwork (selecting only black and the spot color), until I noticed that when I selected "tints & shades" it converted everything with black in it to process (which I know Adobe says is why you shouldn't select that option).
But my question is, how can I get the same effect (that is, using shades of the spot color "mixed" with black) without having it convert the shades to process? I'm sure it involves overprinting, but I'm hitting a big hole in my knowledge.
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedHow can I convert negative image to a positive image in Lightroom.
View 2 Replies View RelatedWhat's the easiest way to convert an image from PNG to JPG ?
I've created an action for that (see attached image), but I'm not able to save the JPG version in the same directory as the original image.
I have created skins for button in photoshop is it possible to convert them into css..??
View 1 Replies View RelatedI've been asked to convert an image to a BMP, but I don't see BMP in the "save as" menu.
I mucked about foundthat I can go Image>Mode>Grayscale then Image>Mode>Bitmap, however I need the image to remain in spot-bluecolour. I sent the person a JPG and TIFF of the file but they insist it has to be a bitmap image. In case this helps the image is simply a company name in Times New Roman font in blue with a white background.
i got an icon from the internet which is png,i open it in ps and its in rgb colour mode of course.but i change the colour mode to cmyk and save it when i imported into indesign,in the link info,it says its rgb again!why isn't it appearing in the colour space as cmyk?
View 7 Replies View Relatedgetting the best results when creating 3D images in Photoshop. I've been experimenting in the creation of 3D images using a 2D source using Photoshop CS5. The output is intended to be a lenticular print.
[URL]
I've achieved some good results by converting my single 2D image into multiple layers, creating 3D postcards and adjusting the parallax and focal plane. This gives a good illusion of depth in the image, but (in my experience at least) I can't get a layer to look like it's popping out of the screen.
I've also tried using a single image and creating a depth map from a greyscale image. This does work to make it look like the image pops out of the screen, but I can't get the same illusion of depth that I get in the other case without distorting the image.
What I'd like to do is combine both methods, using the depth map for the foreground layer and using parallax and focal plane settings for the background. Unfortunately I can't get this to work. If I use a semi-transparent layer as the basis for the depth map I get a light grey fringe around my target layer when I apply the greyscale mask and if I then try and set the parallax and focal plane settings as I would have in the first scenario, the layer with the depth map becomes unusable.
I use some graphics software that accept the image in the form of grayscale as follow :the software then convert this grayscale to a 3d relief.is there a method to convert any image to such format with there details ?
View 4 Replies View RelatedI'm quite the novice with Photoshop. I have to deliver a Tshirt design to a print company in about a day, and they need it in EPS format, vectorized.
Could someone please walk me through how to do this?
Hi all,
I just found this forum a few days ago and have been reading it a bit and found some very useful information and some great resources for Photoshop, I am hoping you can help me with this.
I am using Photoshop CS2 and I know how to convert a color image to B&W, but is it possible to convert a B&W image to color?
Not sure what photoshop version it was BUT there was an option under the menu to convert image to transparent background. I know it wasn't in CS5... it's in CS6. If not, what's the quick and dirty way to get rid of the white background from a JPG?
View 1 Replies View RelatedI want to combine four b/w images of the same object using slightly different illumination into one final colorized image.
View 1 Replies View RelatedI have CS5. Is it possible to convert a raster image to vector, and if so how?
View 2 Replies View RelatedI am trying to help an organization convert lotssss of .jpg pictures that have been created by PhotoShop into a smaller resolution size. Can I receive a suggestion as to how this can be done pragmatically?
View 2 Replies View RelatedI received a TIF image with 5 pages built in to the single image. When I open it in PS CS it does this Pixel Aspect Ratio thing. Which seems to be fine, but I can't figure out how to view the other pages in the TIF. Since Adobe (I think), owns the TIF format as well as PSD, I assume PS has a function to not only SEE and EDIT multi-page TIF files, but also CREATE them.
So Question 1 is, how do I handle multi-page TIF documents? For reading, editing and creating them? A tutorial or help page or another site, whatever is fastest for you guys. I can't find the functions. Or recommend another app to turn 5 TIFs into a SINGLE document would be fine also.
-------------------
Second question is. I have an older scanner that is on it's way out. I have black and white text documents I need to scan and sign and E-mail. Problem is, my scanner WON'T scan in black and white! The page either comes out blank white or as black and white stripes. I CAN scan as a color, or greyscale image.
Now then, let's say I scan this doc as greyscale, as a JPG.
I open the JPG file in PS. Now the page is not B/W to begin with. The whole of the document has an off-white Grey hue to it. I want to make sure it has solid text (no gradients) because the original multi-page TIF is this way. And I want the background to be solid white and text solid black. When it first comes into PS it is greyscale with gradients on the text and a non-white color across the whole image.
How can I convert this to B/W and have good looking black text on white? Plus how do I take these five scans after converting them, and turn them back into a multi-page TIF like the original?
The other thing to note is, that I am amazed about. The original 5page TIF is only 134KB. But even with all my editing I can get as low as a single, ONE page TIF at 80KB. How in the world did they compress so far and still look so nice with so many pages!
I am hoping to edit these docs, convert to b/w and put back in a 5 page TIF, and not be far off from the original file size.
-----------------
What I have tried to far is messing with the "Mode". Changing to duotone and other stuff in that menu. I've used magic eraser to try to remove the background (but still looks like crap in and around fonts).
I've used the hue/saturation tools but that doesn't leave crisp lettering.
I can accept "some" baddies around the fonts. Seeing as how it is scanned. But one of my attempts produces pretty nasty looking fonts! Like so:
This is 516% zoom. You can see "something" needs to change to make this clearer. And artifacts still show up here and there as black dots around the document. Somehow I got it to be b/w.
I once saw a Star Wars poster wich was made up of screenshots of the movie and when you looked at it from a distance you could see a character of the movie.
I was wondering if there is a special technique or even better a filter to recreate this
effect :
Basicly I have an image and loads of other images And I would like the first Image to be build up of all the other images ... (infact the other images will l represent 1 BIG PIXEL of the original image ...)
I have to convert a CMYK image into a monochrome bitmap and I can't figure out how to do this in Photoshop.
In the menu under image - mode , there is only greyscale option, or if I choose bitmap, there is also no monochrome option.
can i use photoshop elements to convert a CR2 image to JPEG?
View 4 Replies View Relatedhow do I convert a raw image to a jpg image file
View 2 Replies View RelatedCan I convert PDF image to TIF format with my Elements 2?
View 2 Replies View RelatedI am attempting to convert a proprietary image format to a dng file. What value do I use for the PhotometricInterpretation in my main image if it came from a black and white camera?
View 2 Replies View Related