I have a many layered PSD. The tab says RGB/8/CMYK? I didn't think you can mix color space?
Â
Now the big question. Any way to determine which layer is CMYK? I'd like to convert it or remove it? It could have been a placed PDF?
I have a CMYK file.
In it I made a selection, and in this selection I may only have B&W values (means only real "black", no more Cyan, Magenta, Yellow).
Â
My question:
How to interpretate CMYK colors/Values into real Black (K) color?
I'm going to work on a composition that will include made different photos. I'm not sure how it will be printed, CMYK or RGB. Without know for sure:
Â
1. Should each individual photo file be set to RGB or CMYK?
Â
2. How much of an affect will it have on the quality of an image if it is changed from RGB to CMYK or the other way around after it has been worked on?
Â
3. I need to request photos from others to be included in this piece. Does the physical size of each photo matter as long as the photos are 150 or 200dpi? Should I request specific sizes or just photos with specific resolutions?
getting the CMYK color codes from an RGB file.
View 3 Replies View RelatedI am working on a very large poster graphic and am coming across some odd issues, at least odd to me. I'm not sure the reasoning behind it, or if there is reasoning behind it? I must be doing something wrong.
I created a ribbon/wave graphic in Photoshop in RGB color mode then converted to CMYK. I then cropped the large (310.875") canvas in to 4 separate images).
I created a new Photoshop file for each canvas to then begin placing different text and graphics on each. The idea was to have the wave behind the images in the forefront of each poster be continuous and flow from one poster to the next. Once done I saved each poster as a tif and then laid them out in inDesign to verify the transition. To my surprise the color for each wave was off or slightly different than the other.
I have been receiving some very simple files from a colleague and her file sizes are a 10th of what mine are. The confusing part is she is sending them in CMYK and I convert them to RGB.
Theoretically they should be smaller. Dimensions and resolution are exactly the same and both are 8 bits per channel and no color profiles. She might be using an older version of Photoshop than me (currently CS3). Anyone have any ideas?
I got a .psb-document with a adjustmentlayer>solid color as a background. The color is a Pantone 354-C. When I save my document (CMYK), and then reopen it, I no longer get the Pantone color library but the default color picker box. I see no visible change in color though so I'm not sure if the color changes. If I click the color library button in my adjustment layer, it automatically pics the PMS color beneth the 354-C (that is 355 C) and I see a change in color. So I have to repick 354-C again.
View 1 Replies View RelatedWhen converting the colour of a Jpeg to CMYK in Photoshop CS5 the file size is increasing.
Â
The original image is 352KB and after saving as CMYK it is 2.1MB
Â
Why is this happening and how can I stop it?
Â
I'm using a lot of images for a print project so need to keep file sizes small with resolution of 300dpi. The image dimensions are really small, only about 30mm high so they shouldn't be this large a file size
Â
I am using a clipping path but this doesn't seem to be effecting file size (I checked by saving it as RGB with a clipping path which stayed small, and by saving one without a clipping path in CMYK which was huge)
Alright, so I'm a photoshop intermediate who's really used this fine program for making web images and a few other things. Now, I've gotten into print advertising at work (yeah, get me to do it rather than outsource it and then pay me a lot less for the effort.
My issue is that I can make ads in B&W or 4C, no problem. This issue comes when I want to do a 2 color ad using a specific color. In my naivety, I presumed using 2 colors in Photoshop and outputting to a CMYK TIFF would be sufficient. The printer has informed me otherwise.
How can i create a digital file for print with a CMYK setting?
View 3 Replies View Relatedmy printing house said I sent him a RGB file and he needs CMYK for printing.Â
Â
(1) How can I know the original file is RBG color mode?
Â
(2) How to convert RGB ai file to CMYK ai file?
I have PaintShop Photo Pro X3 running on Windows 7 x64. I have created artwork for an ad that I am purchasing in a trade publication. The contact person at the magazine tells me that they need my artwork in CMYK format and in a file type of eps. They need the CMYK format in one file as opposed to being broken out into separate channels. They are using Quark software. How I can get my artwork into the format that Quark needs?
View 2 Replies View RelatedI want to know if the PSD file gets converted automatically to CMYK upon placing into Illustrator's CMYK document?
View 2 Replies View RelatedI have an AI CS6 file (CMYK) which I can not print in color. When I save as a PDF file and print it using Reader it prints out in color. My other AI files print in color without a problem.
View 1 Replies View RelatedHaving an issue with CMYK 100%-K value getting reconfigured on PDF/X-3: 2003 (ISO 15930-6) CMYK Export to values like:
C - 74.06%
M - 68.29%
Y - 66.57%
K - 89.83%
When working in the xar file, the CMYK for black is:
C - 0%
M - 0%
Y - 0%
K - 100%
I'm using Paintshop Pro X4 to create images. As these Images are for printing, I need JPG and CMYK. Therefore I use a Internet page called rgb2cmyk.org
But as I upload my files, the dpi is set up from 300 to soething unbelivable high. The Pixel stay the same and so the image gets verry small. If I save them with the old Paintshop Pro 8 I do still have on my Computer, it works perfectly.
So I think, the new Paintshopversion does save a watermark or anything similar on the file and the website can't work with that. How can I fix that??
How to save Ai file in CMYK, in Corel Draw. How do I convert colors from RGB to CMYK?Â
View 9 Replies View RelatedI want open a PSD-File (CMYK) and save it as PNG (RGB). The Problem is, that the colors are completely wrong (orange is brown and so on). I tried something with Colour Management and -Workspace but nothing solves the problem.
If i take a look with XN View the Colours looks good. Same problems with JPG in CMYK (MS Paint shows correct colors, PaintShop wrong).
Example.png
Example
(237.38 KiB) Downloaded 462 times
I work in prepress. I have an Illustrator CS6 file that is made up of 3 Pantone Spot colors. I save the file as an eps from Illustrator and rip the file with our prepress software. When previewing the ripped file with our prepress software it shows me that I have process colors (CMYK) somewhere in the file. I can not see these colors visually in the ripped file so I go back to Illustrator to see if I can edit them out of the file. I use the Preview Separations tool but can't find those process colors anywhere. There are no placed images, everything is vector art. I double check any white color and make sure it doesn't have any tiny percentage of process color in it. I make sure my spot colors are indeed spot colors and not process colors. I add used colors, I delete unused colors. I can't find the CMYK being used anywhere in my Illustrator file. How to clean up these "hidden" colors? This was also a problem in CS3. I'm using an iMac 2.5 GHz Intel Core i5, Mac OS X, Version 10.7.5
View 4 Replies View RelatedAbout once a year I ask about a capability to output a file fromGimp in pdf format and the CMYK color model. In addition it would benice if this output was in the PDF X/1-a:2001 format, to satisfycertain fussy printers. I know there are external converters likeImageMagick. It would however be nice if after all these years Gimpcatered to the needs of the printing industry.
View 4 Replies View RelatedI am working on a 2-color newsletter in Indesign CS5... black and Pantone 227U.
Â
Whenever I place a duotone .eps (black + 227U) or an Illustrator vector .eps with 227U in it, the color mode for that swatch changes to CMYK. An Illustrator vector which is 100% 227U also gives me the same issue.
I need to know if i can make a file into a process color like cmyk for plates. How would i do that
View 5 Replies View RelatedI am using AI and PS CS5.I have an eps in AI that is set for RGB. The colors are how I want them.
Â
When I open the same eps in PS, PS thinks the file is CMYK. Whether I open the file as CMYK and convert to RGB or open at RGB, the colors shift. If I leave the file as CMYK, the colors are shifted.
Â
I can confirm that when I convert the file in AI from RGB to CMYK, I can see the color shift. If I leave the file as RGB in AI, it looks how I want.cannot get the file to show in PS as the same color as what I see in AI.I have confirmed that both AI and PS have color settings set to NA GP2.
[URL]...
Basically, the file with AI in RGB mode looks how I want. The file with AI in CMYK mode looks different.In PS, both RGB and CMYK color mode are the same as CMYK in AI. am not sure why PS does not show the RGB colors like AI does.PS CS5 and AI CS5 are synched:{URL]...
I've been creating book covers in paint shop pro 8. I create the covers from images that I get from my customers, and then send them off to a printer to be printed. On a couple of occasions, the printer people have came back and told me my cover is created in "rich" black. I think they mean the CMYK value is 100% for all 4 colors. They won't accept that. My question is, in photoshop, is there a way once I receive an image to check and see what the CMYK value of that image is, and if so, fix potential problems as described above? It doesn't appear I can in paint shop pro. I have been looking for a good reason to purchase photoshop anyway since I'm sure its a much better graphics program.
View 1 Replies View RelatedI have just started using Photoshop CS3 amending photos and adding text & graphic for printing. The photos start off in RGB but when I get them printed in CMYK they look dark and terrible! how to handle the transition of photos from RGB to CMYK and how to avoid making them darker/destroying the quality?
View 5 Replies View RelatedI was give an image in RGB to put onto my own image which is CMYK. Now that I have spent an hour color matching it, when I go to cut and paste it only one part of it at a time comes over and it looks awful.
View 4 Replies View RelatedI have set up 2 a2 architecxture presentation boards in photoshop in rgb, have come to print them and the colours are a lot more acidy and bright than on screen.
View 3 Replies View RelatedI have a flattened .psd file with significant areas of contaminated black that needs to be changed to key color black. The problem is that the color mode was changed from RGB to CMYK at the last minute after the file was flattened and saved, so now I'm stuck with large black areas that are not PANTONE process black, but are 90% K with varying levels of CM and Y. I need to replace the large impure black swaths of my file with true key color black without compromising the quality of the file to ensure the project succeeds.
View 9 Replies View RelatedI just created the background of a business card in photoshop, it's pretty complex, using lime green as one the main colors.
FORGOT TO CONVERT IT CMYK before I started.Â
When I convert it to CMYK it gets very dark and doesn't look at all like it does in RGB.....
I sometimes Export a vector image with a text I put on, from Illustrator to PS. I do that because I want to work some more on it. However, I'm not sure whether to Export as CMYK or RGB. I have been told that there are more options for working on an image, if it's RGB, it that true? Mostly, I want to do some effects on the text.
View 9 Replies View Relatedkeeping the bright colors of RGB intact when converting to CMYK?
View 2 Replies View Related
