When installing Photoshop CS4 I get the following error:Adobe Photoshop CS4 International English Language PackError:Error 2. Adobe Photoshop CS4 International English Language Pack_x64Error:Error 2.Selecting continue tells me that CS4 and CS4 x64 installed correctly.If I just continue on and try to launch the program, I get an error box that says:"Some of the application components are missing from the Application directory, Please reinstall the application."Reinstall didn't help.
WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
I wanted to install the Photoshop CS6 trial, however both installation apps that are available come up with errors:With Adobe Download Assistant, after a few seconds of the message "Installing application", I get the error message: "The application could not be installed. Try installing it again (Error# 0)".
With Adobe Application Manager, after the files are downloaded and extracted, I get the error "Installation failed: Insufficient disk space to extract files. Please clear space on C: and try again (EX10)", even though both on the target drive (which I've set to D:) and on the C: drive, there is plenty of space available (85GB and 2.5GB, respectively).
I previously had CS4 installed, and uninstalled it before attempting to install the trial of CS6. I'm running Win XP SP3 32-bit on a laptop with 4GB RAM.
After installing Photoshop and Flash CS 4, I have received a network 1063 error concerning a file called AdobeCMapsAll.msi. I've searched through the forums and googled it but haven't found a solution to the problem. I used Adobe AIR to diagnose the problem, however it failed to do so. Has anyone here received a similar problem?
OK so I uninstalled CS and went ahead to try and install CS2, about 30 seconds into the install I get this error message saying that data1.cab cannot be located. I go to the following folder where it should be located and it is there intact with all the files in it.
I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4 Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. I'm just trying to install the trial...
During the extraction of the upgrade version of CS4 (about 95-100% completed) I got the error "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder". I have 690GB free on a 750GB drive so I know space is not a problem. I'm running XP w SP3.
I have reinstalled my operating system twice, after complete format, and both times when I have tried to install Photoshop 7.0 I get an error message; "Component Move Data Error Info, Media name: Data, Component: App-Photoshop, File Group: App-PS, File: photoshop.exe, Error Number: -106 (refer to online help)" which prevents me from reinstalling Photoshop 7.0!
I tried installing on another computer in my house, and the installation was flawless. I am having no problems reinstalling my other programs. On the 2nd of the above re-installs, I did it in the safe mode after deleting all the *.tmp files (and others) as recommended in a forum with Photoshop 7.1 update.
I have requested technical support from Adobe using their online system. I'm supposed to receive a response within 24 hours. I've used this system once before for Adobe Premiere Pro, and got good results, so hope I will again.
When I try to install Photoshop Elements 1.0.1 on a Windows 8 64 bit computer, it says I must have IE 4.0 or higher and I have IE 10 installed. How do I get Photoshop Elements 1.0.1 to install.
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
I tried to install the update with Adobe Updater and it failed with error code U44M1P7.I then downloaded the update patcht directly from the site and tried to install. Again error code this time U44M2P7.
CC Applications PS, Illustrator, Adobe Acrobat Pro will not launch in newly installed Mountain Lion OS on Imac Platform. Attempts to launch and run CC applications results in Configuration Error: 213:5. Further, On board PS and Lightroom applications fail to Launch. CS5.1 install CD (DVD) ejects and will not install. The installed CS5.1 Photoshop failed. Attempted downloads. No luck still could not launch. Attempted to re-install from Adobe installation Disc ...Disc is ejected after 3 or 4 minutes.
The installer stops with this dialog "Insufficient privileges ....." to accesss <file name> Program FilesAdobeAdobe Lightroom 4.2Resourceslensprofiles1.0SigmaSigma When I as the administrator go to this file in Explorer, I can do nothing with: CANNOT SEE THE OWNER, CANNOT SEE PERMISSIONS.... The one thing I have not tried yet is delete it.
I got to this point in the following way: I installed Lightroom from a DVD I purchased; it contained Lightroom 4. On startup it offered to upgrade to LR 4.2. For the rest, see above.
have an install fail on a minor item. Moreover, a prior dialog box said that it was installing the features I selected: I never was given the opportunity to select anything.
I am getting “Error: 4 – Corel VideoStudio files have been damaged or modified. Please reinstall your original source.” with VS Pro X6 trial download. Install runs normally. But when I try to run the software, I get the above error immediately.
Things I have tried:
- Uninstalled from control panel, followed by cleanup tool (VSX4_Cleanup. Is there a more recent version for X5 or X6 ?)
- Deleted the Setup Files folder “Corel VideoStudio Pro X6 Setup Files”, and cleared TEMP files. Rebooted
- Downloaded installer again and repeated install. Rebooted. Tried to run. Same Error
- Confirmed “Protexis Licensing V2” service is running
- No prior version of the software was ever installed on this system
- Running Win 7 Pro x64 SP1. Thinkpad T420 with integrated graphics.
I installed the upgrade version of Lightroom 5 (running 3.6) on a Dell laptop with 4GB RAM and Windows 7 Ultimate. The install never asked for the serial number. When I try to start it I get the folowing message: "The application was unable to start correctly (0xc000007b). Click OK to close the application."
I've installed Inventor 2012 with local (desktop) content libraries.Everything installs OK except the ANSI content library which throws an install error and stops the install.
I had to uncheck the ANSI library prior to install to get everything else to install.Occurs on both of my machines (Win7 32-bit & 64-bit).I think the ANSI install file is corrupted.
How/where can I get the "installed" ANSI content library file that gets installed into C:ProgramDataInventorContent ?
Trying to install LR4 upgrade and it won't install.
Error msg when clicking the yellow package reads: The operation couldn't be completed.(com.apple.installer.pagecontroller error -1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg".
My system is an iMac 3.06 GHz Intel Core 2 Duo w/ 4 GB 1067 MHz DDR3.Just upgraded to 10.6.3 Snow Leopard and the HD has 893GB available.
how or why I am getting this error code when I try to install my software. I bought Coreldraw Graphics Suite X5 from a seller on Ebay. It is supposed to be new but it was opened package.
I have 2013 on my system, and it was working fine for a few weeks, but then one day I tried to bring it up and got this error:
[URL]
and when I click on the ok button, it shuts down the CAD window again. I tried repairing teh install, and then I tried reinstalling the program. I still get the same error, no matter what.
I'm trying to install AutoCad Map 3D 2012 on a Windows 7 x64 machine. The user was
Successfully running the trial version.
Here a couple of the errors I get.
Could not write value Assembly to key softwareClassesCLSID{01255oCB-1BD0-42d5-BAC3-6567BFA308CC}InprocServer3217.0.54.0. Verify that you have sufficient access to that key, or contact your support personnel.
I have also attached a couple of the errors.
The user is a local admin of the machine, I have tried installing as the local administrator as well. I have tried to change the onwer in the registry and all give me the same error.
I downloaded LR 4.0 as an upgrade to 3 for my iMac. When I try to install, the error message I receive is Operation could not be completed ([url]... error-1). What's the problem?
I just signed up to the PhotoShop & Lightroom Cloud. Photoshop installed OK But Lightroom fails to instal. It give 2 errors:
ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
I am trying to instal on a Macbook Pro 2010 running OS-X 10.6.8 with 8 GB of RAM and 535 GB of free hard disk space. I have tried the installation process twice to no avail. Currently running version 4.4 of Lightroom without a hitch.
When trying to run Photoshop CS 5 I get an error message (stopping launch) saying I need to install Java SE 6, however Java SE 6 is no longer supported by Apple for security reasons. I have Java SE 7 (Oracle) installed but Photoshop seems to be unaware.
I have spent a few hours searching for how this can be fixed in a way that does not involve installing an old unsupported version of Java (i.e. SE 6) over the top or in place of the latest version of Java (i.e. SE 7).
I see many people have the same problem, but there appears to be no clear answer from Adobe staff.
So big waste of time.
The more difficult the update process is, the less often people will update their products, ultimately this will impact on Adobe's bottom line.
I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
