I have a Canon PRO-10 printer. I made the custom size change to 11 x 14 in the driver's printer properties, but it does not show up as a choice when I open the dropdown in PSE 11. Is there no way to use custom size paper in PSE 11? What am I doing wrong?
View 3 RepliesWhere can I download the HP Premium Plus Photo Paper, Advanced Photo Paper and Everyday Photo Paper ICC Profiles?
View 2 Replies View RelatedIs it possible to add a custom paper size to Gimp? I have a new HP wide format printer and was looking for a capability to customize the paper size. Hewlett Packard and Microsoft have said that the customization of paper size is application specific even though Microsoft tells you can customize paper size through server properties , which on my XP machine will not save the custom settings.
Note: This page, even though it is not a Microsoft page, shows what Microsoft tells you to do. [URL]
I am editing photo's of documents and I want to make them all the same size after cropping so that when combined into a single pdf they will all be the same size.What is the best way to set the crop feature so my photos will all be the same size as the original paper document they were copied from?
View 3 Replies View RelatedUsing Elements Ver. 7. I have one photo which I have cropped using a 4x6 aspect ratio. I've done the same thing on dozens of photos but this one only prints on half the page (4x6 photo paper) no matter what orientations I set the printer or the program to.
View 1 Replies View RelatedTrying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies View RelatedIs there any way to ad more customizations to it?
Instead of doing post work, can I change it to use my banner and other preferences automatically?
I know of the different choices possible when going through the photo gallery creation options, but I want more.
The index pages are not a problem but it's all of the image pages that become time consuming.
I would like to adjust old photo made on bromportrait photo paper. Is it possible remove texture of bromportrait photo paper? If yes, how it to do?
The image has such texture:
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedI would like to customize the names of Places as I assign them. For instance, I know that this set of pictures was take at the House on the Rock in Wisconsin. Under the "Places" tab, it's listed as 5754 State Road 23 in Spring Green Wisconsin. I'll never remember that this is the ADDDRESS for the House on the Rock, so I want to change the listing to something that will make sense to me as I use the column search function (something logical like: "House on the Rock, Spring Green, Wisconsin")
Is it possible to edit the Place tags?
I select the shape. It has me drag and customize over the picture. Then I click on the Green check mark, but nothing happens?
View 4 Replies View RelatedI am making a slideshow using Corel Movie Factory and realized I need to add 10% to each image for TV overscan area. Each photo is a dif size. I see PhotoShop can resize the canvas using a "relative" percentage and I am wondering if it's possible to do in PhotoPaint using a script or macro, as I don't see resizing as a percentage as an option.
View 2 Replies View RelatedIt happens to me about 50 % of all time when I'm using the Paper Size dialog to crop an image:
No matter which alignment I select in the Placement drop-down box, PhotoPAINT uses the opposite direction.
This doesn't always happen, but it happens about every second time I use that dialog (and I use it often). It seems the error occurs randomly, probably not initializing some internal program memory location correctly.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I thought that I would take a shot at a possible reason why cropping with the paper size dialog would give different results which appear to be random.
1. The dialog opens with the programmer assuming the user will make the paper size larger than the image. He takes the difference between the paper size’s lower right corner and the image’s lower right corner and subtracts the two. That’s a positive number since the paper size is larger than the image. It’s added to all pixel positions in the image which brings the image to the lower right corner of the paper.
2. Now consider what will happen if the paper size is smaller than the image.
Scenario 1: The user picks paper size before position. The difference between the lower right corners is now a negative number. Using negative numbers to reorder the image pixels will incorrectly display the upper right corner of the image in the canvas.
Scenario 2. The user picks position before paper size. The lower right corners of the image and paper are set equal. Reducing the paper size now leaves the lower right corner of the image to be displayed.
Thus the display of the corner of the image appears to be random. However, it’s following the orders given by the user. Without doubt, there are other possible scenarios for this behavior.
I've been printing out a lot of black and white photos on photopaper on a HP Photosmart 7510e.
The printouts are very dark so I've had to boost the brightness levelsin GIMP prior to printing. The problem is that this takes extra timeand I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around40% of the brightness they ought to be.
How do I print 2 different 5x7 photos on the same 81/2x11 sheet of photo paper
View 1 Replies View RelatedWhen trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies View RelatedOn Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies View RelatedHow can I remove a white film on my photos after scanning the photos?
View 1 Replies View RelatedHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedWhy does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View Relatedin elements 11 how can I extract a person from one photo and insert that person into another photo? I'm totally new to this and my software booklet doesn't say and I'm lost.
View 2 Replies View Relatedhow do i add a person from 1 photo to a group of people in another photo (using elements 9)
View 1 Replies View RelatedSo I go to the print set up, but I seem unable to switch from plain paper. I'm using a Mac.
View 3 Replies View RelatedI did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies View RelatedI have PSE 11 and I am creating a Christmas theme with various pictures. I have my main photo with 6 layers including a tree and figures which I can move independantly and the background is the checkerboard as the main layers are turned off with only my selections showing. I also have another photo where I have selected part of it and also turned off the main layers leaving a small part with checkered background. When I have the main photo loaded and drag the other one from the photo bin with the move tool, nothing appears on the main picture. I have already dragged the Christmas tree in the same way and that worked. By the way, all the files are .PSD.
View 6 Replies View Relatedtried several times to shift an object from Photo 1 to photo 2:
identified the object in photo 1, e.g by using the lasso
stored it by edit/copy (or strg/c)
opened photo 2
edit/insert (or strg/v)
object appears in photo 2, but without the frame it was supposed to come with - and by which I could enlarge / minimize / shift it....
made a mistake or software error?
I have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies View RelatedIn Elements is it possible to copy a selection from one photo into a different photo, i.e copy and paste
View 5 Replies View Relatedhow do i replace a face on one photo to another photo
View 4 Replies View Related