I noticed that the colors of my artwork are different after I saved it.I didn't sign profile, Color mode is 8bit.
I tried saving it in TIFF or PNG extension, but the quality of the colors are still the same. I want the colors of the artwork are exactly the same as the workspace (working area).
I need to generate an overview of the colors used in a document.
For that, I would like to cycle through several rectangles of which I know the exact size. The rectangles are filled with a color from the swatch palette.
What I try to achieve is that the swatch name of the rectangle's fill color is written to a text field directly above the rectangle. But I could not find a possibility to 'extract' the fillcolor from a pageItem into a pastable string.
Is there a way to do this with Illustrator and Javascript?
how to change the colors of a entire document like in color styles in x5
View 7 Replies View RelatedMy document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
Can you change permanently the default highlight color(s) for layers in new documents? CS6
View 2 Replies View RelatedIs it possible to get the list of all the fonts and colors used in the active illustrator document (.ai file) ?
if yes then how?
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedas of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
The code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedThe colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.
Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.
View 4 Replies View RelatedYou can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
How can i put the name of a document in the right corner below in that document in PS CS6?
View 2 Replies View RelatedCan this Photoshop CS4 new document dialog issue be improved?
View 2 Replies View Relatedhow do you get three different photos into the layers panel at the same time?
View 3 Replies View RelatedI would like to create a pdf document from several photos - is there a limit and how do i do.
View 2 Replies View RelatedI accidently used photo shop to opened a .pdf file and now all of my .pdf file have to be imported to photo shop to open and I am not able to get all the pages. How am I able to correct this problem and use Adobe Acrobat to open the .pdf file?
View 1 Replies View RelatedSo after 7 solid hours of tedious UI work I was in the middle of nudging a text layer and my whole document completely disappeared. Photoshop (CC) didnt crash, it didn't populate a new window and I didn't close it, it just vanished. It's not in the recent file list and I can't find it anywhere on my computer.
I have autosave set to every 10 minutes, so I'm wondering if these autosaved files are located anywhere on my computer? Photoshop normally recovers my documents after its daily crash but as it didn't crash in this case there is nothing to be recovered!
When I move my cursor over a document tab that is too short to show the whole file name, a pop-up appears with the full file name. The pop-up covers most of the tab, making it harder to click on it. I'd like to turn off this feature. I don't see anything in Preferences to do that.
View 4 Replies View RelatedI am a digital scrapbook designer and I, and several fellow designers, have just started experiencing some odd behavior in CS. It is occuring on both Mac and PC platforms and in versions of CS3 through 5.
We create 12 x 12 in (3600 x 3600 px) 300 dpi documents used by our customers as "backgrounds" for digital scrapbooking kits. We save the documents as jpg's Basline Standard, anywhere from 8-12. Sometimes, if we open a saved jpg and place (drag) it onto a new 12 x 12 document, we notice that the saved file is just a bit and sometimes as much as an 8th of an inch smaller than the new document, even though they are both 12 x 12, 300 dpi. Additionally sometimes when we drag the saved files from Finder or Windows Explorer to a new document while holding the shfit key to center placement, we're still off by that same 8th of an inch. Sometimes, if we align the horizontonal and vertical, the same jpg will be perfectly aligned and no longer too small for the 12 x 12 document and sometimes you can very clearly see the edges of the layer beneath.
This issue is driving us nuts because it just started happening recently and our customers, who very often have their finished scrapbook pages printed, have also started noticing. I don't have a clue where start trouble-shooting this.
everytime I open a new PS Extended document using CS6 on a Mac with op system 10.8.2 an old document opens. I can delete it in the tabs at the top but I would really like to open a fresh document without this step. I have removed the preferences file and rebooted PS Extended, and I have booted using the three finger option cmd shift but all to no avail as the new document open with the old file in the tabs area.
View 7 Replies View RelatedI cannot open or start more than one document in Photoshop. For example: if I have a jpeg open and say do a copy and paste of another jpeg it crashes. If I go to my images folders and try to open another jpeg after having one open it crashes.. any ideas?
View 5 Replies View RelatedI am trying to figure out how a document is given that old look. I could not find any pictures, but the best way I can describe it is that a lot of documentary/info movies use this effect when quoting text from a report or something similar.
It has the appearance of being neatly torn at the top and bottom (I figured out how to do that step through the jagged effect) the text looks as if it is has been photocopied through a bad copier (I tried the photocopy effect, but it made everything too dark) as it has little tiny splotches here and there.
I use photoshop a lot and have a recurring issue... I often have to edit photos and images which invole me being zoomed in to 300-400%. When zoomed in this far I cannot work out how to view the edges of the document (if Im trying to draw a path or something around an object and the path needs to go out side the bordering edge then come back in) is there a way to do this? I can do it by zooming out, dragging the border box to be larger than the image , but can't seem to do it whilst zoomed in. which is a right pain in the rs.
View 2 Replies View Related