I'm using photoshop cs6. i would like to know about how to convert RGB image to CMYK. then how to convert into two colors(yellow & black).finally i like import into any vector drawing software (illustrator, coreldraw) for printing.
View 5 RepliesI want to create slightly rounded corners for an image prior to printing. Being non-destructive and able to adjust the degree of rounding would be great too.
View 6 Replies View RelatedHow do I edit a color image to print well in both color and b&w printing?
View 2 Replies View RelatedI am not able to print images in Photoshop cs6 accurately using my Epson r1900 printer. This seems to have become an issue only since installing cs6. The images look dark and murky. I am using osx 10.7
View 1 Replies View RelatedI'm trying to print colour to my epsom inkjet but for some reason Illustrator keeps converting my colour image to greyscale.
Â
Now I've been using Illustrator for years and this is a new problem I've not come across before. Is there something I can do to stop it doing it - maybe there's a setting that has accidentally switched on that converts all to greyscale.
Â
If not then I suppose I'll have to revert to "turning it on and off again"!
How can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedHow 2 color printing and 4 color printing will work? What are the designing conditions for 4 color printing and 2 color printing?
View 4 Replies View RelatedI'm a machine knitter. I'm converting images into 2,3 or 4-colors for knitting on my compuerized knitting machine. I need to have a separate "line" for each color of the image in order for my machine to knit with yarn of that color. If 4 colors, I must knit 4 times for each row, once with each color.
I'm doing pretty well with creating the needed image file of 2,3 or 4 colors, but have no clue how I might be able to create a master monster file where each horizontal "line" is essentially exploded into 4 lines, one for each color.
No problem when printer manages color. 1-hour photo service was fine also. Printer color management is turned off, in fact greyed out. I tried different papers and icc profiles with same results. CS5, Mac OSX 10.8.3, Canon Pro 9500 Mark II.
View 10 Replies View RelatedWe print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011Â 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
Could it read:
Plate: 1 of 3Â Color: Pantone 375
I need to create a BMP for printing on a Fox Jet Printer. The BMP needs to be 64 dpi vertically and 150 dpi horizontally.
View 2 Replies View RelatedI'm running Mac 10.7.5, with Photoshop CS5. My printer is a Brother MFC-J435W. Until just recently, I've not had any problem printing anything. But a few days ago I can't get the printer to print in color off of Photoshop. Any other program (LibreOffice, Preview, etc...) it prints color images just fine. But all Photoshop documents for the past week have been coming out black and white. I've checked and double checked all the Print dialog settings, and they're all set for color. Puzzled and annoyed does not accurately express things..
View 2 Replies View RelatedI have photoshop cs4 and i'm trying to print to a Toshiba 6520c color copier. I set it to print in color but it only prints black and white. All the other cs4 products will print in color. Has anyone else run across this problem. photoshop will print to our other color copier just fine (its a konica minolta bizhub). I'm thinking it may be a communication issue with photoship and the toshiba print driver.
View 6 Replies View RelatedI got this sticker design in black and in red (#EE2A24).
Now when I print it with my own printer it looks darker and less vivid than on the screen. I put the colors to CMYK format. I also get the exact same result when I print it in RGB.
I want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?
I have many images files. For each picture, I need a color field of the main color, so the one that is most commonly seen.
This color should be saved as a new image as background.How can I do it in Photoshop, so this is done automatically.
I have seen a difference in the color and the shape when I send something in to be printed by a Print company. The file looked alright to me on the screen, but when I got it back the shape was "stretched". I print inkjet CD labels on a Primera Signature Pro Printer as well and some of the labels have come out stretched out of shape as well. It's not terribly out of shape, but enough to mess up the artwork. Any suggestions as to how to check for proper sizing and color?
View 1 Replies View RelatedI work for a small manufacturing company and started using Photoshop 7 to create our magazine ads. I have done pretty well, but the only part I do not understand is how to print out 4-color hard proofs in order to send to the publication.
Currently I do 98% of the ad work and then have to send it out to a printer to create the final 4-color proofs to send to the publication. How can I do this on my own?
I just got a new computer installed, same monitor tho. Ever since I got this new computer, I am unable to print in PS as well as I used to be able to a couple days ago. The color is way off. I have applied my color settings throughout all my Adobe programs to be the same in AI 10, ID CS3 & PS 7.0. I also have a Xerox Phaser 7750 GX.
There is a computer in back of me that prints great & how my computer used to print. Are there some settings that I should check there to compare with?
is there any difference when printing if my images are in CMYK in different colour modes? I will be printing in Spain and i would like to know if there is one more suitable than other. For example, US Web Coated or Japan Color 2001.
View 3 Replies View RelatedWhy when i print a photo on my new HP Photo-smart does it only print in greyscale
View 1 Replies View RelatedI have Photoshop cs5. I also have the Epson R1900 printer. I love this printer but if I don't print enough the heads get clogged. Any RGB color codes or a site where I can download a color bar page that would represent all eight colors of my Epson printer.
What I want to do is print a 8.5 x 11 page every few days that will use each of the print heads wherefore keeping the print heads from clogging.
I am printing on an Epson Stylus Pro 4800. I am using Photoshop CS2 (version 9.0.2)and have the Color Settings set at North American Prepress2 which was recommended for using ICC settings. I have the printer set to "No Color Adjustments" (i.e. let Photoshop control the color).
Each time I send an image to print, the printer is printing color calibration bars then ejecting the sheet. The image is printing on the second sheet. At $2.50 per sheet (fine art paper), I can't afford to waste the paper. Does anyone know how to turn the color calibration bars off. I have already checked the Output Options in the print dialog box and the calibration box is unchecked.
I'm creating images in Photoshop and printing to a Xerox solid ink printer. If I print in greyscale everything is fine, but if I have an image that has both color and B&W portions, the greys come out green (or brown depending on whether I print from CMYK or RGB). Is there any way to have a portion of an image in a color space and others in greyscale?
what I might try as far as the printer? If I print CMYK the greys come out really green but all the other colors are good. If I print RGB the greys come out browner (which is a little better), but other colors get muddy.
Is there any way to get a printer to stop trying to "interpret" greys as a color when in a color mode?
Have used 6 versions of Elements and then moved to CS3 2 years ago. Have printed 100's of large format images using HP Photosmart Pro 8350 and 8750 printers. Results have been excellent with CS3 set up to let printer manage color and at printer color management level the setting is colorsmart/sRGB which is HP's default for printer managing the color. Installed Design Premium last week and significant differences from monitor to preview of print image. Print test results are all too vibrant and dark-muddy.
I changed about every setting I could in both CS4 and the printer to find a match up. I wrote every single one down for reference. I then reinstalled CS3( removed when I installed Design Premium). CS3 had the same problem now ( No I have not reinstalled Design Premium yet) CS3 is removed and I am  back to square one. I know the monitor set up is perfect as I have access to a very expensive spectroradiometer and the calibration including gamma is dead on. I then experimented with bringing up an image to print using a very routine editing program named Microsoft Digital Image Suite. The preview was perfect as well as the print( on both printers using the settings listed above).
Did a lot searching on the internet for a similar problem. Found none with HP printers but did find several instances with Canon printers( too vibrant too dark) but could not find a resolution. I am really open and appreciative of any suggestions. I don't care if I have already tried them. I will try again. Oh I also reloaded the printer drivers on both printers, no improvement.
I'm unable to get correct results in printing through Photoshop Element 11 and my printer Epson R1800.Though, it works correctly with other software that support colorsync (ex: DXO Optic Pro 8).
Â
I tried every combination with my ICC profile : "let photshop manage colors", "let printer manage colors", ... Each time the resulting print is too dark.Even worth : when I print several time the same photo with the same parameter under Photoshop Element, I don't get the same result each time.
Â
On DXO, I print by activating colorsync with the same profile I use with Photoshop Element and the result is always great with each time correct colors rendition.
Â
My configuration is : iMac 24 2007 + Mountain Lion + Epson R1800.
I am using Elements 6 for Mac with OS 10.6. My printer is a Canon MG8120, which uses several color cartridges (including a black and gray) and a pigment black cartridge.
Â
Today I tried to print a B&W line-art document, and it printed in a faint yellow. I tried another B&W doc, and the same thing happened. I exported the documents as both .pdf and .jpeg, and they printed in B&W using the Preview application.
Â
As it happens, all the color carts in my printer are either low or out of ink. Only the pgiment black is full (I put it in yesterday). So I wonder if my B&W docs have been printing from the color carts and not the pigment black cart. Is there any way to get PSE to use the pigment black cart?
Create photo calendars for local printing.
View 2 Replies View RelatedI’m wondering about color spaces and how they affect working with BW digital images and digital printing (working in PS and LR).
Â
I’ve been thinking that the grays are probably more limited by the bit depth (65,536 shades of gray for 16-bit vs. 256 shades for 8-bit.) than by whether or not you’re working in ProPhotoRGB or AdobeRGB, but that’s just a guess on my part. Does these two color spaces really better than the other, specifically for BW images and digital printing (I'm printing to an Epson 3880)?
I'm designing a roll-up banner with an image of two people that has to be on the banner, so I use Photoshop for the background + the image of the people.
Â
What is the best color depth (8/16/32 bits/channel) for this roll-up banner when working on 100% of the original size: 1260x2120 mm? Other tips and tricks for future designs concerning color depth?
I have PS CS6 and like to do B & W prints. I print them on my Canon MX870 printer (4 color printer) ... they turn out quite nice. VERY Black & White. Recently, I started doing B & W with a small highlight of color... like a photo of my daughter and her friends with just her red shoes in color.
The Black and White is now not truly B & W... it is slightly tinted ... purplish. I have tried adjusting the levels and contrast but it only changes the tinting to other tints... bluish, redish, etc. I use cmyk 300dpi (typical of what commercial print shops would use). Still no success. Or am I stuck having to send my photos to a printshop for printing?