Photoshop :: Could Not ImageReady Specific Data Because Slices Were In Unsupported Format
Feb 20, 2012
I am trying to create an animated gif by modifying multiple layers of an image in Photoshop, then opening the image in ImageReady to customize the animation. However, when I open the image in ImageReady, I get an error message: "Could not read Adobe ImageReady specific data because slices were in an unsupported format." Consequently I am unable to "make frames from layers" in the animation pallette of ImageReady.
View 1 Replies
ADVERTISEMENT
Jul 24, 2005
When creating templates with photoshop and image ready, is there a way to mark the slice as a background image?
When I generate the html the slices all end up as images. I then have to go into DW and change the img src to none and set the background image of the cell to the name it was.
Is there an easier way?
View 1 Replies
View Related
Oct 9, 2004
I am creating an interactive trainer that operates like a website. I created slices and rollovers for different section within the trainer and all works flawlessly in Imageready, but when I preview there are gaps between the slices and some of the page edges are jagged where the slices seem to have moved or slipped?
View 1 Replies
View Related
Jan 27, 2005
Many times, when I set up a set of slices and export the html and images, I discover that an extra row has been added by ImageReady along the top and right side of the table. It is 1 pixel high along the top, 1 pixel wide along the side. How can I prevent this?
View 3 Replies
View Related
Mar 23, 2013
I am currently on X6, but have had every version prior produce the same problem. When I create a Video File using the "Custom" avi (Xvid) option, it doesn't matter which Audio format and setting I select ( and I have tried them all !) when I play the file on my TV ( Panasonic - New) I get a message that the Audio file is unsupported, and there is no audio.
View 7 Replies
View Related
Mar 11, 2008
OK, I want to make a slice which will display my image, just like a normal slice, but which will allow me to put text over that slice. For example, if I could get it to make a table slice, which would use the image as a background and allow me to fill the table with text, that would satisfy my need. I just need to be able to type text over the available image. I could do this in HTML, of course, but that disallows me to go back and edit the page in photoshop again, without losing all the table modifications.
So is there a way to do this? I've been using photoshop forever, but I'm not all that familiar with imageready. So maybe this is a simple solution, but I don't know it.
View 3 Replies
View Related
May 8, 2011
Trying to streamline some work flow issues and would love to be able to "Save As" without having to navigate through file formats , say, .png - every time.
Is there a way to open the file browser in PS to a specific file format each time?
View 5 Replies
View Related
Aug 10, 2012
When we are producing cross sections through our surfaces, the chainages are every 10m, and the level at these chainages. This is fine in some cases, but when you have batter slopes, you want a level at the top of slope, and bottom of slope. How do you get the chainages at these areas. I have attached a sample image, showing a dashed line where I want a chainage and level in the bands. Is there a way to do this?
EDIT: The attached section is produced from an alignment through the surfaces,
View 2 Replies
View Related
Dec 14, 2008
I need to export out of Map into MapInfo. My problem is I need the object data to export out into a specific order. At the moment I can only get it to export in alphabetic order which is no good for me. Is there any way I can reorder the object data into the order I want?
View 9 Replies
View Related
Oct 27, 2013
I want to send the contents of A1 to an Illustrator document at 135, 172 and B1 to 135,190, same with A2/B2 will be at different coordinates as will A3/B3 and so on... I want to do this 6 times and save the document as a PDF. Then, it should clear and do it again. The columns will ALWAYS be A and B.
View 5 Replies
View Related
Dec 7, 2011
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
View 9 Replies
View Related
Nov 28, 2013
I've created the attached table (used as legend in drawing, to point out revisions).
Cells in second column from the left are set as data dd/MM/yyyy, so when I change revision I write current data and it give correct format.
The problem is that every time I change layout and come back (or every time I open the drawing), data in empty cells were set to 01/01/1970...but I want them empty.
If I clean them, I clean also the data format.
View 1 Replies
View Related
Jul 1, 2013
I am looking for software that will convert USGS GIS data to CAD format. Does AutoCAD offer such a thing?
View 2 Replies
View Related
Sep 29, 2013
I have an drawing file which contains 3000points , as i want those to be converted in .csv format,
[URL]
View 9 Replies
View Related
Sep 17, 2012
How can I display the object data of a layer in table format, with VB.net. or How can I display the attributes of a .SHP file, edit it and also add new point to it.
View 2 Replies
View Related
May 30, 2013
I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
View 5 Replies
View Related
Feb 13, 2012
How to plot a survey drawing with field data in text format, (using Autocad 2008, so that the point number and XYZ coordinates appear on the drawing.
View 1 Replies
View Related
Jun 18, 2012
i want to convert autocad drawing which indicates water depth data as text into txt format...x reference and y reference and the digital value indicated at the reference in xyz format...
View 3 Replies
View Related
Nov 14, 2013
We've recently upgraded a large project from Civil 3D 2012 to Civil 3D 2014 and for the most part things have migrated well.
On this project as well as others that have been migrated, I've been noticing this and similar messages re: modified in a previous version when the dref's synchronize:
"FG-STREET A was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized."
The steps we used for converting this project in order are:
Set Data shortcuts working folder.
Migrate Survey Database.
Open/save base drawing containing survey & EG surface.
Open/save all C3d source dwgs before opening any plan sheets.
Open/save all C3d plan sheets.
Because of the warning message I thought I'd try the "Migrating Data Shortcuts" following the instructions.
Use the stand-alone Data Shortcuts Editor to save one or more data shortcuts to a specified folder. If the shortcuts were created with a previous version of AutoCAD Civil 3D, they will be updated to the current format in this process.
When following the steps in the Data Shortcuts Editor, when I get to step 5, select the folder & choose Saveas, I see the following message that they will be saved in 2009 format?
Isn't that a downgrade? How these modified in a previous version messages?
I'm still trying to figure out if they are a benign message or if they are something I should be concerned with. 95% of the shortcuts on the project sync normally & seem to work fine other than an occasional disappearing profile in the sheet profiles.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 7 Replies
View Related
Jun 18, 2012
how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
View 3 Replies
View Related
Jan 12, 2013
This is an InDesign/Photoshop error but the problem itself is coming from Photoshop.
I made a silhouette pic in Photoshop CS6 after rasterizing some layers and what I have is a black background with a white figure in the foreground. I could not convert it to a JPEG, but I opened it up in Bridge and I wanted to import it into InDesign, but then I got an error message that said:
"This file uses an unsupported color space. Only RGB, CMYK, L*a*b*, grayscale, indexed and bitmap formats are supported by the Photoshop filter"
I tried to fix it in Photoshop but there's no way to unlock the Background layer in order to edit it.
View 1 Replies
View Related
Oct 26, 2012
I've just bought Sony Vaio Duo 11 i7 edition with Windows 8 Pro, but I found pen pressure isn't working on neither Photoshop CS5.0.4 or Photoshop Elements 10, while its pen pressure works on Fresh Paint and Artrage 3.5.5.
View 20 Replies
View Related
Oct 25, 2012
I have a folder of tiffs that were recovered from an sd card out of a Canon T3i. The only recovery software that worked saved them as Tiff files. I can view the thumbnail, I can even view the full res version in Windows Picture Viewer, but the files cannot be opened by Lightroom, Photoshop, Infranview or Gimp. The all spit out a message to the tune of "unsupported tiff format".
I'd be happy to just get these things into jpeg format so that I can edit them,.
View 36 Replies
View Related
Mar 27, 2008
the TIFF output from our large office printer cannot be opened with photoshop? im just told its unsupported. how can a £2000 design suite (dont even get me started on why the english have to pay more than double the US pay for the same product) not open basic TIFF files? the basic windows one can open them fine and i have to print them to pdf to import into photoshop
this is ridiculous - is there a work around or do i just not use TIFF from that printer/scanner any more?
View 10 Replies
View Related
Apr 19, 2009
I recently had to make the move from CS4 on Mac OS 10.5.6 to CS4 x64 on Vista.
I opened a file and worked on it with no problems on the new CS4 x64 setup. It also saved multiple times throughout with no apparent problems.
When I have tried to reopen the file on the same CS4 x64 Vista setup I get the following errors in this order:
--
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose Flatten to load composite data as a flattened image.
Options - Keep Layers, Cancel, Flatten
(If I choose Flatten I get this error: Could not complete your request because an unexpected end-of-file was encountered)
I choose Keep Layers -->
--
The file uses an unsupported blending mode. Substitute normal mode?
Options - OK, Cancel, Flatten
(If I choose Flatten: Could not complete your request because an unexpected end-of-file was encountered)
I choose OK -->
--
encountered reading layer
"Shape 1 copy 220"
because of a program error.
Continue?
I choose OK -->
--
Some groupes were found corrupted and repaired.
OK -->
--
Could not complete your request because the file is not compatible with this version of Photoshop.
OK -->
And the file has closed itself.
I cannot open this file on either CS4 on the mac or CS4 x64 on the PC.
As a side note, this particular file is a personal blog design I've been working with on and off for several months so I can't be 100% sure, but I don't believe I have a layer called 'Shape 1 copy 220' as I surely would remember copying a layer 220 times.
Of course, it is annoying that I lost maybe 4 hours work (I have a backup of the original file), but my main concern is this happening again - especially with commercial work. Can anyone shed any light on known issues between Mac and PC versions of CS4?
View 1 Replies
View Related
Sep 20, 2012
I have a Gateway 500SE PC, Home XP, Nikon View 6.0.0, Photoshop Elements 1.01. I have a Nikon D100 camera. When I import a Nef uncompressed file into Elements it gives me an error box...Unsupported Color Depth. I must change these pictures to a supported color depth. This takes too much time to change every picture in a folder when you want to make a contact sheet What is this and how do I fix it?
View 4 Replies
View Related
Sep 6, 2013
Why do my .JPG files "appear to be unsupported or damaged" in LR 4? I've never had this isssue before, just (attempting) to import files from my snycomatic folder (taken with my iphone). I've been doing it exactly the same as usual, but this time when I attempt it I get "the files appear to be unsupported or damaged."
All are jpeg files, all open in finder just fine, and it did allow 8 of the 30 some odd pictures to be imported? preview image(s) were unavailable in the thumbnails, though the ones that worked were visable.
I did double check and the folder permissions are all fine and I seem to be able to import other files from other folders with no issues.Running Lightroom 4.4 & OSX10.7.5 on a Mbpro.
View 23 Replies
View Related
Mar 27, 2014
I can drag these same pictures to Lightroom and work on them but I can't import them for catalog. They preview in any viewer but I can't import for catalog.
View 3 Replies
View Related
Jun 6, 2013
I'm synchronizing my LR files with my Hard Drive files. I get an Import Results page that says: Some import operations were not performed. The files appear to be unsupported or damaged. It then lists the files that could not be imported. When I look at the files, some are .CR2 (Canon RAW) files, some are .TIF files, and some are .PSD files.
I don't know when the problem originated, but I was able to open them earlier. There are hundreds of files that cannot be read.
View 6 Replies
View Related
Feb 15, 2012
program which has full PSD support? (ie not Photoshop)
View 11 Replies
View Related
Sep 1, 2013
Having a new problem with X3. Starting today, when I try to add borders to a raster image, I get the following message:
"Command could not be completed because the document type is unsupported"
Same thing happens if it is "Merged Visible"
If the image is flattened or is a background image all works fine. I do not have this problem in X2. I did reset the workspace, as sometimes that works, but not in this instance.
View 1 Replies
View Related
