I have a 16 bit, ProPhoto tif file in .psb format. My question is, if I convert it to sRGB and then back to ProPhoto will I get the original ProPhoto colorspace or will it be lost? BTW, does the same hold true for converting in .dng?
View 13 Replies
How to set output to ProPhoto RGB and 16 bit Tiff when converting RAW files in ACR? Using PS6.
View 3 Replies View RelatedI'm having a bizarre, when I try to convert any color profile from Adobe RBG to sRBG to ensure better viewing colors on the web. I actually go through the process twice to confirm that I've done it -- I convert the image's color profile to sRBG under the "Edit" drop-down menu, then I double check to make sure that sRGB is selected when I go through the "Save for Web" option under the "File" drop-down menu. The converted images still look muddy when posted online, and it always puzzled me why when I open them up again in PS, it tells me that the image has no Color Profile, and I need to assign it one. I would just ignore the message, thinking it didn't apply because I had already done it twice previously. The other day, I opened up one of my twice-converted sRGB images and when prompted, assigned the profile to sRBG a THIRD time. Finally the image came out perfectly on the web. Now whenever I make that third sRGB conversion on web images, the profile remains permanent. This just makes no sense to me. I should only have to convert the profile once.
View 2 Replies View RelatedHow does Photoshop CS3 convert from Gray to sRGB in Save for the Web? Every time I use Save for the Web with a Gray scale image, it makes it too dark. While trying to reproduce the results, I found that a Dot Gain of 30% matched its conversion the closest. Does Save for the Web assume a Dot Gain of 30% for the conversion?
This would definitely be a very poor assumption if so. Currently, I have a Dot Gain of 15% in the Color Settings dialog box. As far as I can tell, there's no setting in Photoshop, or Save for the Web for that matter, to set these types of conversions; hence, the reason my Gray scale images are coming out too dark.
I am an artist doing digital paintings on Photoshop CS3. I drew an outline of my drawing in one shade of blue and realized the color profile was in sRGB.
I have now converted the psd document to color profile Adobe 1998.
When I start to put color in, underneath the blue outline layer -will the colors be of Adobe 1998 quality? (I plan to do gradients/blend colors and eventually print my work out. I have heard the colors can look choppy when done on sRGB mode) .
I recently changed pc and monitor causing a damn problem with those color spaces! My monitor is a Dell u2412m and by default it's setted on:
Now when I open a RAW file with ACR and choose sRGB as color space the result is this:As you can see, most of the photo presents black shadows. If I save the file and I open it with windows image it's perfect. Indeed, if I choose ProPhoto for monitor and for the photo the visualization is fine:
I must change the color space in sRGB or even RGB before save the final image so I really would like to se a real preview of it in photoshop instead of saving it first. So the problem occurs when I save to RGB (less artifacts) and sRGB (lots of artifacts!). I can't understand this because I'm using the same color space as default for my monitor.
The pc configuration is:Intel i7 3770
Ati HD7870 driver Ati 12.11 beta
RAM 16gb
I have a high resolution (300 dpi) JPG image, but my printer wants me to supply him with TIFF images. If I saved this high-res JPG image as a TIFF would that be sufficient to convert it, or is there something else I have to do?
View 3 Replies View RelatedI need to be able to convert documents (.pdfs or anything else really) into multi page, CCITT group type 4 .tiffs. I've read that this is possible to do in Photoshop, but when I tried downloading a trial on my computer, I wound up with a corrupted hard disk (unfortunately, this is also on my personal, not my work computer), but no functional software. How to get Photoshop to run without destroying my hard disk, I'd like to find out if it's worth the trouble.
View 1 Replies View RelatedSuddenly I can't save my PSD files as JPEG file without CS6 wanting to turn them into tiff files. Keeps prompting me to to choose from a drop down menu as Maya or Amiga files.
I've checked to be sure my file is set for 8 bits and srgb. Not working with video files of any sort. In fact, I've tried saving past PSD files as JPEG and it's giving me the same iff prompt.
I'm taking the time to edit some of my nicer/older outdoor photos that were taken in jpeg format in Photoshop CS3 and then on to printing with an Epson 3800. I've been told that files I want to print I should make sure that I'm set to an RGB color space (1998), get icc profiles for paper, have photoshop manage colors, etc.
This is all going great! However, I've recently read online that to truly show the full potential of one's photos, those jpeg's should be converted to a TIFF file format...especially when printing (I'm now taking everything in RAW format, but I still have to take care of some of these nicer jpeg's).
Have done several prints comparing same photo in jpeg & tiff and tiff definately is higher quality. Now..my questions concern some of the settings in CS3 when I chose 'Save As' - 'Format' = tiff. Code:
I have used the Camera Raw editor for the first time. The .jpg subject file was saved as a .dng file. I don't know how to change that back into .jpg.
View 1 Replies View RelatedGIMP 2.6.11 WinXP
I've been opening my RAW images in Irfanview, converting them to .tif images, and then opening the .tif images in GIMP for processing, but I've been getting a pop-up window (see screenshot) that says:
"Calling error for procedure 'gimp-image-set-resolution': Image resolution is out of bounds, using the default resolution instead."
What does that message mean?
I am trying to find an efficient method for converting PNGs to TIFFs for management in LR 4.4. I have tried using Automator for Mac for this purpose. However, the converted TIFF files appear corrupt when imported into LR, although they still work when imported to Photoshop.
Any reason why Automator's conversion would not be acceptable?
Similarly, I tried using GraphicConverter 8 and had the same results.
can I convert my jpeg files in iPhoto to TIFF files for better printing quality?
View 1 Replies View RelatedIs there any way of running a batch process to convert a number of AutoCad drawings into Tiff format, at once? Also, if a batch process is not available, can we save our plot settings for conversion to Tiff so that they can be recalled at a later stage? We would like to be able to transfer the same plot settings to other PCs so that we are all producing the same formatted files. Are the plot settings transferable?
View 5 Replies View RelatedI scanned my signature into my computer as a TIFF file. I then edited and cleaned it up in Photoshop. Then I placed it into Illustrator and turned it into a Vector file. The problem with this though is that there are vector paths around the perimeter of the signature and not down the middle of the letter strokes as would be if I had made it in Illustrator. Is there a way that I can still make this happen?
I just converted it back to a tiff file becuas the vector lines were turning into double lines in places. I just enlarged them enough that it hid any gaps and then converted it into a tiff file to have another try at it. Would much rather work with one line though.
I noticed that converting tiff to dng makes the files smaller.Is there any reason not to convert them? Is the compression completly lossless? Will it be slower?
View 2 Replies View RelatedI have a very large piece of artwork in my possession. The artwork was originally drawn in high-resolution on a computer, but a true digital copy of the original is not available to the public.
My copy of the artwork is large enough such that the original pixels can just barely be distinguished by the naked eye. I would like to scan it in at extremely high resolution, or take photos of it (multiple photos of various sections may be necessary for enough resolution). Afterwards, I am wondering if Photoshop, some available filter, or other image-processing program would be able to analyze this ultra-resolution scan and reconstruct a perfect copy of the original digital image?
The idea is that if I can see the original pixels with my eye, Photoshop should be able to likewise deduce all the original pixels of the original digital image, and reconstruct it as such via some algorithm, in the original resolution.
Is there a way to do batch process of converting .jpg or .tif images from RGB to CMYK?
View 2 Replies View RelatedI had recently downloaded CorelDraw 6 upgrading from CorelDraw3. I'm guessing that the CD6 automatically converted all my files that were CD3 to CD6...Any who...I decided that I like corel draw 3 better and redownloaded it. Now I can't open my CD3 files now..Even though my files says CD3 I still can't open them.
What can I do?
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
I have the following problem, I would like to select in Photoshop, edit, color setting ProPho RGB as working space but for some reason it is not there, meaning I cannot select it.
Do I have to enable or install this somehow?
I recently started using PS CS6 and edit the photos in ProPhoto. My stock agency requires flattened TIFF images for submission. They look fine when I send them, however after they load them on the site the colors are very flat. I understand that when saving for web I must save and convert to sRgb. Is there something I need to do to the TIFF file prior to submitting or is this something that needs to be resolved by the agency prior ot loading on the site?
Here are links to
1) a side by side comparison
2) the image as it appears on the stock site
URLs....
Well, it looks like I edited an image in ProPhoto RGB and now when I save as JPEG I get a color change (always looks warmer, like a change in white balance.)
When I convert to another profile, the color change. Is there anyway to either convert and get my colors back or as to JPEG with the color's I'm getting in photoshop? What is odd is I'll see a nice white background in PS and even in the thumbnail. But if I open it in anything but PS I get color change.
Missing ProPhoto RGB and Mini Bridge in CS5 version 12.0.4?
I am missing the ProPhoto RGB in the Color Settings in Photoshop CS5.
Also the Mini Bridge in Photoshop CS5 just shows Waiting for Bridge, but never retrieves anything.
Windows 7 Ultimate 64 Bit, Intel i5, 4GB Ram, ATI Radeon 5400
1. Is there any benefit to using the ProPhoto color space when one's monitor is only standard (sRGB) gamut?
1a. Ditto Adobe RGB with a standard gamut monitor.
- What is the use of retaining more colors if you can't see them?
2. Are there any possible DISadvantages to using a wider colorspace than you can see?
3. If printing, how can you softproof your photos and visualize the printer output, if the file contains colors you can't see on your monitor?
why Light-room was set up to use the ProPhoto RBG Color Space?
View 4 Replies View RelatedIs it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
View 3 Replies View RelatedI am using PSE 12 as an external editor for Aperture. When I ask to use an external photo editor, Aperture creates a .tiff file in my Aperture folder, launches PSE 12 and tells it to edit that .tiff file. This all works great. When I am done editing in PSE 12, I ask it to save the file and it saves it back to the original Aperture folder with a .tif extension. I can instead say "save as" and then it suggests the file name with a .tif extension. When I correct the extension to .tiff it warns me that I'm going to overwrite the file (exactly what I want!). I say yes and then I find out that PSE did not overwrite the file, but wrote it as a .tif file anyway. I have to go to the folder, delete the .tiff file and rename the .tif file to .tiff and then everything is fine - but what a hassle.
View 3 Replies View RelatedWhat the difference is between RGB and sRGB? Any website links that explain the whole colours/printing side of things in detail that would be handy as need to touch up on this knowledge.
View 8 Replies View RelatedI have a pc using xp. I have overwritten the sRGB IEC61966-2.1 profile in Photoshop 7.
View 4 Replies View Related
