I'm an artist by profession and having problems trying to blend colours consistantly on canvas. At the moment it is trial and error. Is there software out there that if I select two colours , the programme will create a colour gradient and by selecting a certain point on the gradient by using a dropper, the programme is able to calculate in what proportions (%) the two original colours were mixed?
View 1 Replies
I have been trying the achieve a smooth colour gradient in one of my PS drawings using the gradient tool. No matter what I do I alway get banding. The worst scenario is when I try to use radial gradient.
I'm using large (80x50ins@200dpi) 8bit psd files on a colornavigator calibrated Eizo CG301w. (Vistax64)
Greyscale gradients are really smooth but the colour gradients are not....
I click the gradients panel and then the dropdown of gradients on the left side.
All I see is: White Black, Gold Dust, and Blue Sky.
I know AI has a ton more gradients premade than that so why aren't they in the list? How do I add more to that dropdown?
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedHow do you make a 3 colored gradient? Like Orange, Red and Blue?
View 6 Replies View RelatedHow do I create my own gradients? I know how to manipulate existing gradients and I DLed a few free gradients as well but i would really like to make my own. Anyone know how to do that?
View 2 Replies View RelatedI am trying to create a gradient glow effect like the attached, my attempt is on the right hand side but it has rings and just looks crap... Was this not done in Photoshop? I thought this was the best program to do this type of thing in... I just want to create nice gradients!
View 5 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI recently wrote myself an action that includes a gradient layer (two colors in radial so one color is in the center and fades to another on the outer edges)
The gradient's position is exactly as I want it when I return the action on horizontal images, but doesn't work on vertical, as the gradient stays horizontal when the action is run, and so the edges are more or less lost.
This might be a daft question, but is there anything I can write into the action so it knows when it's running on a vertical picture, and when it's running on a horizontal one, so the gradient layer will have the corresponding position? Or is this (as i have a feeling it might be) a case of inserting a stop, and message telling the user to manually adjust the angle of the gradient before continuing?
there's a sharp transition after the smooth one (transition end and fill color doesn't match)... What is configured wrong? in the gradient settings, there's only one color, and gradient midpoints are also in the middle...
View 1 Replies View Relatedi used one of the preset gradiant colors and cant get it to use the pallete for gradients.
View 3 Replies View Relatedi'm working on a 16 bit psd photo file. i'm using an adjustment layer with a layer mask. when i draw a gradient or use the eraser tool on the layer mask i've been noticing a banding pattern.
View 4 Replies View RelatedI've got a client that needs the PMS colors of his logo. The problem I have is that his logo has a gradient and since I didn't originally make it, I don't have the original source files.
View 1 Replies View RelatedI recently upgraded from CS to CS3 and I can't for the life of me figure out how you set the gradients so they add on top of each other rather than overwriting.
View 2 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View Related9.0 CS2, but it is not so important, because the questions are fundamental.
Gradient Overlay
1. Look at the gradient settings scale. Why gradient isn't stopped at the second opacity stop and go on till the edge of the settings scale? After all, following the logic it’s the opacity stop and the gradient filling have to be stopped at it. That is to say If the logic of gradient algorithm is next. Filling begins from the left edge of the settings scale and stops at the first opacity stop(this filling is initiated by first markers). Then it continues since first markers and stops at the second opacity stop(this filling is initiated by second markers). But in practice filling continues since second markers also, though there is no third markers which initiate it.
2. Why second markers are necessary(they can’t be deleted)? I can suggest if second markers would be deleted and the first would be moved to position of the second, we would got the same gradient preview. Of course if the filling begins from the left edge and is initiated by the markers as I wrote above.
3. User color – you can set fixed color, which you can choose for the future in a dialog window. The window can be called via click to the pointer near the color icon.
When I click the pointer I see only one window where are three text items – foreground, background, user color. All is clear about foreground and background, they are set in two squares in the tools palette. When I choose “user color” there is no any window is appeared which have to contains at least current user color icon, color picker window, and buttons that allow to tune and apply user color: “set as user color sample” for picked color, “use user color sample as user color”. So how I can tune and choose user color?
Gradient:
4. I use gradient tool from tools palette. I spent it since canvas top edge till guide line. What is the gist of spending it for a specific distance? Why the color of first color stop fills the space till the guide line changing and stops at some light blue. And then monotonically fills with it all distance from guide line till canvas bottom and have no any opacity changes at bottom. Although it have to have some opacity changes because them present in the end of gradient settings scale.
I frequently find myself recreating gradients created in illustrator using Photoshop. however, even when using the exact settings for color, opacity, and location, they never come out the same. is there some rule of thumb or some logic as to how those two applications create gradients and how to better approximate them?
View 5 Replies View RelatedI try to load gradients I saved in cs5 and it now says I've exceeded the number of gradients. it would never save them so I had to keep loading.
View 3 Replies View Relatedi`m trying everything to get the smoothest softest blends possible in photoshop, and I think its possible because Ive seen a lot of digital graphics where it is really nicely done, but mine is a disaster.the banding and artifacts in it are disheartening. whether with brush or gradient, even on small areas like 7 to 12 inches. I'm not talking about poster size just average A4 pages being painted.
I've used the brush tool on the softest setting, and a wacom bamboo tablet, with pen pressure determines opacity seeming to produce the best results, low opacity to try build it up, opaque etc, and very close tones, as close as possible, and the gradients don't fair much better,
is this the way it is or is there another technique to get smooth blends with the brush or gradients? the colour picker seems to have smooth silky powdery blends, I thought it would be possible to paint like this with the airbrush in PS but it doesn't produce this kind of softness.. of course the colour picker is code generated not with a brush,,
-here the brush is used on 3 types of settings, the last being with pen pressure determines opacity producing better results, but not what I expected.
-here I used a large soft brush which was larger than the oval, and a few swipes across but I can still see artifacts or shapes in there,
