I'm using Photoshop CS2. When I use pen tool to draw paths line, the line is in gray,which is hard to see some sometimes. I have seen path line in other colors before, however, I really don't know how to change the color.
View 1 Replies
I found out that you can't change line color in the line nova because a fix to prevent white on white or something like that. Is there another way to change the line color.
View 6 Replies View RelatedI need to change some lines that are in a layer from a black/gray to brown. So I tried to change it by right clicking (PS 7.0) and blending options then tried a bunch of stuff and nothing seems to work: color overlay, blend mode, blend if... but I can't get the color.
I would greatly appreciate it if someone tell me how to do this? The color I need is somewhere between #734002 and #B16203.
How can i change i line color of a shape (Rectangle, ellipse, etc)? I mean the Border color of a shape?
View 5 Replies View RelatedI'm trying to create a rectangle with a red border and no inside fill. It's only to highlight some text of a bank form.
Â
I know i have to right click the layer and choose blending options and stroke. But I've tried to change the color so many times and no matter what I do, the outer line remains gray and with rounded corners.
Â
I want the corners of the rectangle to be squared, not rounded but I'm having a hard time changing this.
I'm using Photoshop CS3
show a picture of where to change the color of the outer line? I've tried everything.
I have a black and white line drawing (jpeg or bmp) that I need to modify. A section of it needs to have the white background changed to a color background.
View 2 Replies View RelatedBeen using ACAD for 20+years...AutoCAD 2012/Civil 3D 2012 is driving me nuts. Simple question I am sure. I created a new layer with green as its color. It is showing up as yellow in my viewport. I checked my plot style(ctb), and is same as I have used for many years....prints black(pen 7). Typically shows green on screen and plots black. Looking in the Layer Properties Manager, I noticed that on the far right, there is a column labeled 'VP Plot Syle'. It has Color 2(yellow) shown. How do I change this as I am guessing this is causing issue.Â
View 6 Replies View RelatedHow do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies View RelatedHow can I change the horizontal line color of a table (not the border line color)? I would like the border to be black, but the horizontal lines to be gray.
View 9 Replies View RelatedI would like the section line to have a special line type and color. How can this be changed?
View 1 Replies View RelatedI am trying to create a script who could act as an Autocad plot (ie convert each color to black, with a different line weight).Â
Â
Here is the first script I melted, who create my Black swatch
if ( app.documents.length > 0 ) {
var myDoc = app.activeDocument;
//add Black swatch
var newSwatch = app.activeDocument.swatches.add()
var newColor = new GrayColor();
newColor.gray = 100;
[Code] .........Â
Â
And here is the second one, who replace one color by Black (it don't change the text, nor the lineweight yet…
Â
if ( app.documents.length > 0 ) {
//test de dialogue
function csDialog() {
var fabGroup = app.activeDocument.swatchGroups.getByName('Fabrics');
var allFabs = fabGroup.getAllSwatches();
var fabNames = Array();
[Code] ........
Is there a way to change the cursor color in the command line in AutoCAD 2013?
When I change the background (active command) to black, the cursor blends into it and not visible. Can’t see where is my current position when editing coordinates. The command background was black and text white for the last 10 years for 20 drafters; we would like to keep it this wayÂ
Is it possible to change the color of a line by changing the display configuration? If so, how?
View 3 Replies View RelatedIn AutoCAD 2009 is there a way to make a leader line change color with per the layer it is on?
View 3 Replies View RelatedI'm currently trying to use the text tool so I can color a line of text in two differing colors. However when I highlight the characters I want to change the whole line changes.
How do I change the color of specific characters in a line of text?
I was trying to do one that can change color and line weight using a number provided by user. What i want to do is to ask a number to the user, 5 for example, and then change the color to 5, and the lw to .5. I was starting with this:
(defun c:ccv (/ eco lun ob cc clw)
(setq eco (getvar "cmdecho"))
(setq lun (getvar "lunits"))
(setvar "lunits" 2)
[code]......
but is not working, it has a bug with the clw variable.
How can I modify the line type/weight? How can I change the color? Â Where are my object properties?
I have seen a few threads with variations of these questions. Â I had the same ones, until now. Â I did some serious messing around and came up with this, I thought it may be useful:
To get the AutoCAD 2012 "Properties" panel in ACA 2012:
Disclaimer: This procedure involves modifying your software's configuration file(s). If you choose to follow it, you do so at your own risk.
1. Â Open the "Customize User Interface" dialog by a familiar method (I like the keyboard, the command is "CUI").
2. Â Switch to the "Transfer" tab.
a. If you can't see it, expand the dialog to 2-columns by clicking the ">" button in the lower right corner.Â
3. Set the left-hand column to "acad.cuix", I'll call this the "source file".
a. Â If you can not see the file, click the "Open" button and navigate to your "Application Data" folder.
i. Â Win7:Â {userProfile}AppDataRoaming
ii. WinXP:Â {userProfile}Application Data
b. Navigate further to the Autodesk Support folder:
i. {Application Data}AutodeskACA 2012enuSupport
4. Â Set the right-hand column to "Main Customization File", or another customization file you intend to use, the "destination file".
5. Â Expand both files' "Ribbon->Panels" nodes.
6. Â Locate the "Home - Properties" panel in the source file.
7. Â Right-click the panel and select "Copy" from the context menu.
8. Â Right-click the destination file's "Panels" node and select "Paste" from the context menu, it will be added to the end of the panel list.
a.  NOTE: You may get a warning that the panel already exists. If you do, click the "Rename" button. The new panel will most likely show up as "Copy Of Home - Properties"Â
b.  Right-Click the new panel and select "Rename". Set the name to "Home - ACADProperties"
9. Â Click the destination file's "Save" button.
10. Switch back to the dialog's "Customize" tab.
11. Using the drop-down, select your destination file as the file to customize.
12. Expand the (a) "Ribbon -> Tabs -> Home-ACA" and (b) "Ribbon -> Panels" nodes in the "Customizations…" (top-left) section.
13. Select the "Ribbon -> Panels -> Home-ACADProperties" panel, a preview will appear and the "Properties" section will populate.
14. Edit the panel's "Display Text" property, change it to "Properties"Â (this is the name that will appear on the panel once it's added to the UI).
15. Right-click the "Home-ACADProperties" panel in the "Customizations…" section and select "Copy" from the context menu.
16. Right-click the "Ribbon -> Tabs -> Home-ACA" node and select "Paste" from the context menu.
17. Click the "Save" button.
18. Click the "OK" button.
19. Observe your UI, the new Properties panel will appear at the right end of the "Home" tab.
20. Drag the panel to the location you would like it.
a.  NOTE: Adding this panel to the tab causes the other panels to resize so the ribbon fits the screen/UI width. If there are any panels that you aren't using, turn them off to allow more room for the other panels. (I turned off the "Transparency" panel, the new "Properties" panel includes those commands in the slide-out, making it redundant.)
b. Â To turn a panel off, right-click a panel title, select Show Panels, then uncheck any panel you don't want displayed.
Now, my ribbon looks like this:
Just installed service pack 2 on Civil 3d 2012...
I go to open a drawing; drawing opens fine and views fine for a second, but then everything changes to viewing Color 9.... I am able to select a line or a piece of text and change it to any color imaginable but it always stays color 9. Although I am able to create a line and have it the correct color, it is just everything that had been existing in the current drawing at the time...
I have tried shademode, which if I put it into a 3d wireframe views fine in modelspace... but it always is going back to the 2d wireframe visual style that is the problem...
I cannot seem to find any problems with the drawing... I have run audit and purge all, I open backed up files and autosaves, all doing the same thing... I even had someone else open the drawing with the same occurence...Â
I want to change the color, line type, width and layer of all my blocks in my drawing. is there a way to do this with out opening all the blocks for editing? I am using AutoCAD 2009.
View 1 Replies View RelatedI'm looking for a way to copy a text or a simple line, circle... ; after I copied it, the last entity change its color to green.
View 3 Replies View RelatedLately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies View RelatedI am working in Photoshop CS4...have been for years. All of a sudden, when I try to fill a closed path with a color, it fills the entire art board with color, except not inside the path. I have not selected "inverse" or anything....and it has never done this before....I can't figure out why it has started doing this, and I can't get it to stop. Most of the paths in my file, I have made in Illustrator and then pasted into Photoshop...they work normally....it is just the ones I actually draw in Photoshop that are doing this....one thing I have noticed is that in the paths palette, the paths I pasted in from Illustrator have a grey background.....while the paths I actually drew in Photoshop have a white background.
View 4 Replies View RelatedUsing Illustrator CS4
Â
I've imported a map from a DWG prepared in Archicad (vector based architecture software)
Â
This map shows roads and buildings (they are paths in illustrator) and as you would imagine the roads are curved but rather than being drawn with curves they are composed of many many straight line paths and as I'm meaning to have a model laser cut from the Illustrator file I need to join these paths into longer paths so the laser cutting doesn't take forever.
Â
As far as I can see it's fairly simple to simplify the number of anchor points on a curved path using the Object>Path>Simplify tool but simplifying multiple straight line paths that only have the slightest deviation in angle seems harder, or at least I can't work it out.
Â
I have attached an image, The areas highlighted in green are examples of areas where there are too many paths and just one or two paths would be fine. It would be fine to either convert the paths to curved paths or just simply reduce the number of straight line paths that compose the curves.
I searched the forums briefly and couldn't find an answer to a couple annoying problems I've been having with Photoshop. I'm running a PC with Photoshop CS2, which is part of the entire creative suite package that I recently purchased. Here are the two issues that I’m trying to tackle.
1) Combining multiple paths
I have a picture of a car and I’ve painstakingly traced a path around the outer perimeter, but then there are other areas that I’d like to include as part of the same path and I can’t seem to find out how to make this happen. Just to be clear, I select a path around the outside of the car so I can place it into a new background, put in some shadows, etc.
But, when I try to select other areas of the image to include as part of the path (say between the spokes of the wheels) so the new background shows through as well, it creates a separate path. I’ve yet to figure out how to combine each into a single path file so when I attempt to create an effect, I don’t have five different paths to tackle. A similar scenario cropped up (pardon the pun) when I try to do a radial blur on the wheels and a motion blur to create the appearance of motion. I simply can’t figure out how to get the paths into a single file.
2) When manually adjusting levels of an image, the three eye-droppers that allow you to set white, grey and black points can be used, for example to select which part of the image should be the brightest white (in the case of “set white point”). When I use this eye dropper, it keeps changing the foreground color in the toolbar.
Does anyone have any ideas on how to prevent that from happening? This is rather annoying because when I try to expand the canvas size and I’m expecting it to be white, it ends up being and off shade of white because it picked up the color of the background that I selected as what should be the brightest white in my image. I know the long work around, but am I missing a default setting that would prevent this from happening?
Being new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedThis is what I'm trying to make...
The black lines would be the pen paths (curved shapes) with a brush stroke, but then I would like to select an area of all those pen paths lines (like you for example do when using marquee tool) (in the example green color) and fill the path lines with for example green only on that selected area and the rest stays black in this case and only the lines would be filled, so not the white space between. I kind of did it in Illustrator using scissor tool, but cutting all the paths takes a lot of time and precision so I thought there might be a better, easier, more precise way to do this in photoshop. how to accomplish something like that?
I need to send vectorized art to this company that only uses Illustrator. I have never used or even opened Illustrator. Ok, I'm very familiar with Freehand so I get the basic idea about vector. I have a 3 color logo that I have saved as a Photoshop DCS .eps file with the channels saved as spot colors so I can print separations with Pantone colors. According to what I have translated from the Photoshop guide what I need to do is figure out how to get my clipping paths of each channel to retain its fill when I export paths to Illustrator. I've tried and when I open the vectorized paths in say Freehand there is only lines and no fills. Do you guys have any ideas on how I can get these file seperations to this company with Illustrator?
View 3 Replies View Relatedi want to create technical drawings, in photoshop, with the pen tool - and then for the resultant image to end up looking like it's been hand drawn with a pencil
so a little variation in shade, along the paths, perhaps with little variations of pressure and even a little wobbliness,
Using IL CS6. I have a photo that I did an image trace on. Now I want to make it an illustration. I would like to select multiply paths and apply a color change to all of them at once. I would like to be able to select the paths to change by their current color, and then apply the change all in one shot if possible.
View 11 Replies View RelatedI would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View Related
