I've made some selections by color range to recreate a scan and have them as channels. When I save them as a pdf while veiwing only the channels the result is a blank pdf. I'm thinking I should convert the channels to layers but can you. It seems I've done it before.
View 2 RepliesWhat I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
Â
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
(CS3) I have a raster layer that has some semi-transparent pixels.
I'd like to make the layer itself fully opaque, and move the contents of its alpha channel into a layer mask.
(If possible, merging the alpha channel with what I have already placed into the layer mask.)
I am interested in B&W conversion from color. I need to copy a red channel information to a new layer, how is this done in CS?
View 8 Replies View RelatedIm trying to copy a channel as a separate layer Im not sure how to word this right. I wanna keep the red channel cause like it as a starting point but i also want to keep the RGB to add some of the original color on parts of the red channel
View 1 Replies View RelatedI follow a tutorial about making a pattern and she tells me to paste. I need to have the right channel marked. I do have the black dot in the right channel, and the channel is marked. I have a mask selected. I click paste, nothing happens.
Â
It's a brick and I'm planning to have 3 channels for it. Light, dark and something in between recolorable. I even saved a selection and then loaded it onto the correct channel. I tried to delete the extra mask channels hoping it was still saved. Then all knowledge of any maskes seems to be gone. As you can see on this picture I have all the channels there with masks, but it's still not being saved. I load this into another program and channels is nothing but 3 different colors all over. There is no selection. When I'm trying to save this as dds It says I have 3 alpha channels, they are suppose to be red, green and blue! [URL] ........
Suppose I have carefully made a selection and saved it as a channel. I then use that channel in an adjustment layer as a mask. I also use the inverse of that channel in another adjustment layer.
Â
At this point do I have three separate masks inside photoshop: the original channel, and two others that are layer masks? If I then see that the original mask wasn't quite right so I do a refine mask on one of the layer masks. I haven't, I think, changed the original channel, right? But I'd like to use the inverse of that channel in the other adjustment layer.
This gets pretty messy pretty fast, especially because I'm working on a very large image. After I modify the layer mask should I save it off as a separate named channel (it doesn't seem to be accessible unless the layer it's on is active) and then invert that, save it, and reload it as the layer mask for the other adjustment layer?
This question is more theoretical, as I have found a work around. On a layer, I have a gray color, which I sample, and it becomes the desired Foreground color.
Â
I would like to Fill a Selection in an Alpha Channel with this gray color.
Â
However, when I view the Alpha channel, my forground color is lost to black/white, which I understand, as the Alpha channel is a gray scale image.
Â
But, I am able to sample a gray Swatch to make a Foreground color, but how can I preserve my chosen Foreground gray selected from a Layer? The only way that I know would be to make a new Swatch, and then use that when I am in Channels.
when I added a layer mask to a layer, it would display in the palette as the alpha channel, which was very handy. Now, when I add a layer mask, it only appears as the mask icon; i.e., gray square with white circle in the middle. I have no clue what I did to change from the one to the other, but I would certainly like to get the alpha representation back!
View 3 Replies View RelatedI am making selections of models off of a white background. I use the quick select tool and refine to make a clean selection. I go in and use the clone tool to remove the "halo" that is still there to make a super clean selection with no light bleed on the model. I put a black layer underneath to make sure that I got all of the remnants. I save the selection and turn it into a channel. I apply the layer mask and everything looks good. I flatten the image and put it on a white background (this is the desired form of delivery for client) Image saved and closed. When reopened, I make a selection using the channel and there is a distinct halo effect still present. I have tried making the selection and going over it a couple times with the brush at 100% and it works a little bit, but not entirely. I have already spent a lot of time going through cloning things out so it looks good, delivering the images, then they are sent back because of the halo.
View 8 Replies View RelatedWIndows 7 x64Â Â |Â Â PS CS6. Just now while attempting to edit a Channel Mixer adjustment layer's creation dialogue settings, about 15 browser windows (not tabs but individual windows) trying to load Adobe docs all popped opened simultaneously.Killed Firefox's process and went back to PS.Every time I went back to PS though, it would happen again, when I clicked in the Channel Mixer settings.
Â
Got out of the loop by mashing the ESC button as I switched back to PS, which successfully killed the Channel Mixer dialogue.I've seen this behavior in PS for about 4 versions now, but never this severe. How dysfunctional.
I have an existing (grayscale) image that I want to make into the alpha channel for another image.
View 11 Replies View RelatedI am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
For years I've been using various image editors, often in combination. That is, I do simple stuff as copy / paste and repositioning of elements in one editor and subsequently open the image in a more advanced editor for proper paintwork. Currently I'm using the Gimp for the latter. Color layers work brilliantly. However, I have big problems with my alpha channel--I've found no way to edit it within Gimp and I've found no way to import a revised version that I've edited in another image editor. There must be solutions to both challenges.
The editing I require is piece-of-cake in basic image editors--I simply want to move a transparent region a bit to the left. That should be a simple rectangle selection and then shoving it (mouse or arrow keys) to where I want it. Alternatively I could import my edited alpha channel image as I'm used to doing in other editors. Well, the Gimp will accept the image as a layer all right but I haven't succeeded in making the Gimp import my grayscale image as an alpha channel. I get a grayscale non-transparent layer instead.
So, I've got a perfectly good alpha channel that needs a minor tweak. It loads as intended in Gimp. How to perform basic editing of this alpha channel layer or tell me how to import a revised version and tell Gimp that this image should be interpreted as an alpha channel?
Is there any way I can directly make a grayscale image into an alpha transparency channel?
I mean, NOT involving selection? Because selection by color to layer mask,is really difficult what I need to do the selection threshold.
Why is it easy to turn an alpha channel into a grayscale image but not the reverse?
I'm having a problem with being able to select inputs in the Chanel box / layer editor ! I am using maya 2012 on a MacBook pro , for instance if I create a cylinder ,when it's created I bring up the Chanel box , I have : pCylinder1 then the boxes for adjusting the xyz axis etc , then shapes / pCylinderShape1 , and that's it ! I have no inputs tab to adjust sub-divisions etc ?? Have I not got something selected
View 1 Replies View RelatedI'm trying to make a texture for a model in a video game, and I want some of it to be transparent. This is done by editing a text file that tells the model to use the textures alpha channel. things in the alpha channel that are white are transparent and things that are black aren't.
But I don't really know how to edit the textures alpha. Here is a video I've seen that explains how to make one in photoshop: [URL]......
How to do exactly what he does in gimp? whenever i duplicate one of the rgb layers, it isn't black and white like it is in ps. i'm also not sure how to have it turn into the alpha.
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedI have a large psd. The bottom most Layer can be a background layer is it possible to flatten just this layer to make is a background layer as this may make the file size smaller. Im working in PH5 on a Mac.
View 2 Replies View Relatedim trying to add an alpha layer or alpha channel to a bitmap and save in BMP format.
I am using Photoshop 6.
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? Â I need the flowline to follow my profile elevations.
View 4 Replies View Relatedcan someone tell me the easiers way to make an alpha tga file? Photoshop 7 can done alpha when i save to tga 32 bits, but in CS we have to do it manually...
View 1 Replies View Relatedany difference between alpha layer and alpha channel? I mean has to be right? I just don't know what exactly that would be if there is. I'm trying to figure out some more stable uses for computer graphics when building textures with alpha layer or alpha channels. So far I get a flicker from opengl bug when using alphas. So I'm wondering if I use Alpha layer and something with a solid color underneath the geometry if I could achieve a more stable result where alpha sorting. Possibly clearing it up where my alpha layered geometry stays on top vs bleeding through at times it seems.
View 4 Replies View RelatedHow do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
How would you take a layer mask, and make it its own layer? If you try copying and pasting a layer mask, you can only dock it to another layer.
View 1 Replies View RelatedIn order to make a copy of a layer. I know I make a copy of the layer, but then I'm having issues taking the layer, and reversing it horizontally so that I can create a new layer using the previous copied layer. I don't know what I'm doing wrong, and I've been experimenting with it. I'm now able to create really nice and curvy looking hills, but still just not able to copy it, and reverse it.
View 2 Replies View RelatedPhotoshop cs5 I have a picture with a lot of layers.
Â
One of the layers I would like save as a separate layer that is not part of the images, for after that to use the stamp tools to "copy" from the new lay and in my original image.
Â
When do I copy a layer which is a self-image?
I have a layer that I used in every project of Adobe Photoshop and in that case I used to re-design that layer or copy the image of layer from another project. Is there any way to make that layer default that when I shall start a "new" project, that layer automaticaly fix at layer panel (same as first layer) ?
View 2 Replies View RelatedI'm wanting to make a diagonal cut and can find no information about how to do this.Â
View 5 Replies View RelatedAfter recent update (CC) the feature which was allowing the invisible layers (turned off by "eye" icon) to be not selectable by Move Tool is gone. So when one have a web page design with 300 layers and 3 states in groups and you decide to deactive some of them (make them invisible) you can still select them. So overall it makes imposible to selecet anything. You must do it manualy on the Layers pannel.
Â
See image below - so instead of selecting only visible layers (like in previous versions) now onet is forced to select every possible layers so in most cases all present layers in the file.