Photoshop :: Camera Raw 4.6 Color Conversion
Jan 13, 2009
I'm using CS3. In the Camera Raw 4.6 import window the color looks great. When I get the image into Photoshop the color looks horrible. I know it's the color profile that Raw is assigning. My question... is there a way to disable the color profile conversion coming from Camera Raw?
I've always had great results without using profiles and now this alters my color. I've even tried to go in and force the image to use a different color profile but at this point the damage has been done by the camera raw plugin.
View 39 Replies
ADVERTISEMENT
Jan 10, 2013
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
View 19 Replies
View Related
Sep 29, 2013
Photoshop CS6 crashes while "building color conversion tables" I reinstalled the program but it still hangs up at this point.
View 7 Replies
View Related
Jun 4, 2013
Whenever I open a photo with my Adobe Photoshop Elements 9, I get the following message:
The monitor profile “LCD color management and conversion” appears to be defective. Please rerun your monitor calibration software.”
Following the message are 2 buttons: “Ignore Profile” and “Use Anyway.”
What do I need to do?
View 1 Replies
View Related
Oct 15, 2011
I've been using corel draw since version 4, and I love it. Now on x5 I cannot figure this out. I use eps files for printing large format with contour lines for cutting. My setup uses a spot color defined as "CutContour" for cutting. It seems x5 renames these colors or converts them to something else. I opened the same file in 12 and had to Reclick the same color for the cutter to see it and it worked fine. Any setting to change this?
View 2 Replies
View Related
Oct 8, 2012
I bought a Pepin press book & cd, of wallpaper patterns. They are not in the rgb mode, but the (what is it? ) CYBK? mode. When I load them onto gimp the colors are way off.
Apparently gimp converts them to rgb mode, but the colors are glaring & clashing.
View 5 Replies
View Related
May 10, 2011
For our sublimation printing, we use Corel X3,
For some time we have problems with the colors.
As standard pallette we use Pantone Coated, but after I export a .cdr to .eps some colors are replaced with a new color with the same name, when I open it in Coreldraw again afterwards. The colors are placed in a new user pallette and have different CMYK values.
How knows how to keep my PMS coated pallete?
View 1 Replies
View Related
Mar 24, 2011
Is there a way to have Corel Draw X4 automatically convert all RGB colors into CYMK? I've a very complicated clipart and all colors are RGB; I don't want to convert the clipart into a bitmap to change the color mode.
View 8 Replies
View Related
Aug 23, 2013
I have been having a problem with Gimp. I am currently working on a Gif banner for a webpage. The banner itself is 728x90 pixels. It has 186 different layes as well, some of which are inside of folders. The xcf itself is complete, but the only other stage I need to complete is converting it to Indexed colors so I can export it as a gif; however, whenever i access the Image>Mode tab, the "Indexed" button isn't highlighted, and I am unable to click on it, even with the keyboard commands. I haven't been able to find a solution so far. Here's a picture of the problem.
View 7 Replies
View Related
Apr 25, 2013
When a mixed RGB/CMYK PDF is opened in Illustrator CS6, Illustrator forces a conversion to one color space or the other. See this screenshot: [URL]
I assume this is a limitation of Illustrator and there's no way to keep both color spaces. Under that assumption, Is it possible to choose the profiles used for the conversion from RGB to CMYK? Can Illustrator be made to use the RGB and CMYK profiles defined in its Color Settings to make this conversion?
View 8 Replies
View Related
May 31, 2013
I'm new to Photoshop. Currently, Im learning Photoshop through Adobe Photoshop CS6 Classroom in a Book. I found out that the camera raw plug-in seems weird.
This is the original photo.
When I opened it in Camera Raw, the color of the photo distorted. ( I didn't do anything on it yet. )
Is it caused by software problems? Or did I accidentally tick something in the Setting/Preferences?
View 6 Replies
View Related
Nov 6, 2008
I've seen color gradations in the tint sliders (which makes selecting exactly what color hue you're shooting for easier). Is this a feature only in CS3 and above (just like the histogram display in the curves palette)?
View 1 Replies
View Related
Jul 26, 2013
Adjust the color calibration for camera?
View 3 Replies
View Related
Dec 19, 2013
Created photo then used file menue, export preset, xrite. It worked but I never got a change to select a name. It came up as "profile". What am I missing. Found the profiles but my camera Cannon Rebel 4ti is not listed. Is there an easy way to change or delete these profiles?
View 6 Replies
View Related
Sep 12, 2012
Attempting for the first time camera animation, but the rendered movie appears to be faded, washed out, loss of color- not sure the proper term here. Attached image shows original, with window in upper left showing washed out color in movie animation rendering.
Using:
Inventor 2012
Windows 7 64 bit
3.07 Ghz Xeon processor
6 Gig
NVIDIA Quadro 2000
View 3 Replies
View Related
May 4, 2012
I have taken some pictures with my camera, I cannot adjust the white balance of the camera, so the pictures come out with a slight grey background. I want to change that to a white background.
View 12 Replies
View Related
Jul 14, 2012
I am an underwater photographer and white balance is an important issue. I was advised to set the white balance in my camera (Nikon D90) to the color temp of my strobes ( 4800 K) so my subject lighted by by strobes would have the correct color. When I import the RAW (NEF) file into lightroom I would expect that the color temp shown in develop mode would be 4800 K.
Unfortunately it is not. It even differs from picture to picture. I would like to know why and if something can be done about this?
View 16 Replies
View Related
Jan 26, 2013
I have created custom profiles using Color Checker Passport for sunny, cloudy, flash, tungsten etc but would really like to create one for most shoots. I thought it would be a good idea to name it say "Temp" and overwrite each time so that I dont end up knee deep in camera profiles. But I am guessing if I do this will the latest saved version of "Temp" change the camera profile of all other previously saved versions of "Temp" from other shoots?It would be good if the saved version of "Temp" resided within the folder of that particular shoot only.
View 27 Replies
View Related
Sep 15, 2013
Can't open file from Nikon D7100 in Camera RAW Plug-In,i have Photoshop CS5 and plugin is upgraded.Format NEF from Nikon D 7100 is not in this plug-in photoshop.
View 2 Replies
View Related
Dec 22, 2013
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
View 2 Replies
View Related
Nov 13, 2012
Have no choices in the camera calibration tab inside camera raw plugin. Use CS3 and Raw 4.6. Are choices only available in later version or PS? Also in Raw preferences choice for camera serial number and also setting as defaults. Where to enter serial number etc.
View 1 Replies
View Related
May 11, 2013
my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
View 10 Replies
View Related
Dec 16, 2012
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies
View Related
Sep 14, 2013
I own a GoPro Hero 3 Black camera. I saw the Russell Brown demonstration of Camera RAW to correct lens distortion (
[URL].......
In this instruction, he takes images into Camera RAW and selects a tab called Profile, and it automatically detected the camera from metadata and made corrections.
I was sold, subscribed to Adobe Cloud, downloaded Photoshop and started following his tutorial. When I got to the lens correction part, my Camera RAW has no Profiles tab. Brown does say that you need the latest version, but I have assumed that since I just subscribed and downloaded, that I have that.
View 9 Replies
View Related
Jun 2, 2013
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script [URL]....right? but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw.
View 2 Replies
View Related
Jun 2, 2010
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies
View Related
May 31, 2013
I don't know how to phrase it correctly but the 3d camera tracker inside of After Effects will only apply key frames to the null object. This causes the footage to rotate around itself.
View 4 Replies
View Related
Nov 25, 2008
I shoot photos with a Nikon D2X and my wife uses a Nikon D70. If I open a D70 raw file, and then go to camera calibration, the profiles available are for various standard profiles and D2X profiles. The D70 profiles do not show in the drop down list. All of the profiles have been downloaded, from Adobe, and installed.
If I open a D2X raw file, the standard and D2X profiles are shown in the dropdown box.
Have I missed something in the installation? Do the profiles have to be loaded somehow?
View 2 Replies
View Related
Dec 28, 2011
I'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies
View Related
Apr 7, 2014
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies
View Related
Nov 23, 2013
I am working on a project where I am incorporating 3d text into a shot with an onscreen talent speaking to the camera. I am trying to get the text to only move when the camera moves such as a pan or a hand held shake, making it look like it's part of the environment. It will track with the camera and looks great until my talent /subject moves, then the text moves with the subject. What am I doing wrong in my tracking? I have looked up tutorials and articles searching for others who have had this problem and cannot find anything that replicates my issue. Every tutorial I've seen does the same thing with fantastic results but I can never get the text to not move with my subject.
View 2 Replies
View Related
