I have a multitude of old edits with the ext .pspimage. I have googled and tried the 2 most likely options I found with no success, is there any way to open them in CS6. I would like to convert them and save them as .psd. There must be a way surely.
View 12 RepliesMorphing space! I would like to do what other advanced programs do by assigning points to an image and then morph/transpose those points to another space with the same number of defined points.
As a very crude geometric example if I have a 5-pointed star and want to transpose those 5 defined points onto an ellipse with 5 similarly defined points, what might be your approach be to execute this function. How to create and application/extension pack, or write the code for such a function? Any method of steps to create this transition process? (See Two Accompanying JPEGS) .
A vastly more complex situation, but one that continually is used it graphic arts applications would be to morph or transpose the spacial dimensions of one image into those of a second image which is assigned the same set.
I have 1000 or so CR2 raw files that I need to convert into 2000 px .jpg files. I tried the batch and action combo but I can’t get past when the file is opened in camera raw and the action stops.
View 3 Replies View Relatedi have this simple image 1 to image 2 problem.Basically i need to go from this:
[IMG][IMG](URL address blocked: See forum rules)[/IMG][/IMG]
To this:
[IMG][IMG](URL address blocked: See forum rules)[/IMG][/IMG]
I have tried using a levels adjustment layer (and quite a few others) and dragging the gray midtone slider to the left and almost but not quite,
i am running photoshop 6.0.1 on win2000.
I need to know how to batch convert many tif images from 200 dpi to 300 dpi.
do i need to modify a .atn file? is there a plug-in or something?
I have 72dpi image at 18in. I need to go to print. Should I resize to 300dpi at around 4in or just scale down the image? It will go on a business card so I really have enough pixels because it's not very big, just not sure best resize method.
View 9 Replies View RelatedI want to batch convert some .psd images into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another.Â
View 3 Replies View RelatedWe would like to use Gimp for a small set of image conversion experiments. Unfortunately, the system where we want to install and run Gimp belongs to a US Govt agency, the environment is secure and their data is extremely sensitive. So we need to get their approval before we can install Gimp. To get it, we need to provide information on whether Gimp is "US-based" or "foreign-origin". We don't have a strict definition of what either of these terms means, but I am wondering if you have encountered these questions before. Can you tell me what the geographic origin of the tool is? Do you know of any specific instances of your tool being installed at any US Govt locations with sensitive environments?
View 2 Replies View RelatedI recently switched from a Dell PC to a Mac and wondered if there is an exchange program or an upgrade change to keep from having to buy a whole new copy for the Mac.Â
View 2 Replies View RelatedI use CS3, 3gb of Ram and more then 50mb of free hard disk space.
When I convert a Raw image to Jpg the file size is reduced but opened in CS3 the Image size appears unchanged. What is the correlation between image and file size? I thought the Image Size was the horizontal number of pixels x the vertical. If this is correct and the jpg has less pixels how can CS3 show it as having the same image size?
in addition what is the use of Image Size other than to indicate the print size at a given resolution?
I am working on Photoshop CS3 with 24 bits Bitmap files.
I would like to know how to convert a 24 bits Bitmap files to 565 RGB files.
Opening Nikon D300 jpg image (Bridge CS3/file/open with/photoshop) does a sRGB->aRGB conversion. Why?
The D300 metadata shows Color Mode RGB and Color Profile sRGB IEC61966-2.1 so that looks good. PS Color settings/Working Spaces/RGB is set for aRGB and Color Settings/Color Management Polices/RGB is set for Preserve Embedded Profiles (and the three check boxes are checked). I expected the sRGB embedded profile to be preserved but that isn't the case.
I like to use LAB fairly often and have done so in CS2 with no trouble. I'm on Windows XP Pro, 1 gb RAM.
Now that I've loaded CS3, same image converts to black. All over black. Edge to edge black. I mean BLACK!
All channels are active (L, a, b). No mask is in effect. My working
space is ProPhoto.
If I convert it back to RGB, the image is still there.
What's going on here with CS3? I've done the usual color settings. I've deleted my preferences.
Also, when loading PSCS3, a message always pops up saying "there must
be at least one document open to run this script!" Don't know where
that comes from either. I'm not trying to run any script, just opening Photoshop?
I'm thinking I'd better uninstall CS3 and start over. Before doing
so, though,
I have recently switched to shoot my photos in RAW format. I do the usual adjustments in Camera Raw and the hit "Open Image". Next is that I save my image as JPEG with the Maximum Quality. Once I look at my saved JPEG file though I find that most of them have a lot of noise and seem not to reflect any adjustments that I did to the RAW file.
View 9 Replies View RelatedI work in a school district that is running an old version of Adobe Photoshop CS3 in a Macintosh environment. The Macs are old 10.4.11 machines that would not print. So, I set up a Windows Server with Macintosh accessible folders and copied files to this server. I then had newer Windows 7 client machines available and copied the files over to their client machines. Some of the files came over to Windows as CS3, but others didn't. They show up as "File" in the format and not as CS3. Is there a workaround for this, or another way to get these files to Windows?
View 1 Replies View RelatedHave been reading thread that one had posted about converting PSD to JPEG. From what I have read, seems as though no matter what you can not replicate the image you have created as PSD. I have worked on a photo that was taken on my BB and to my pleasant surprise have been able to correct several issues. I believe it looks so much better because of flattening and 16bit application.
Must say color, focus(originally was terribly out of focus) everything is great. However, cannot covert and keep the work I have already done with Photoshop. Can I convert to JPEG or any other format that allows sharing without sacrificing what I have as PSD ?
I am working with a .jpg(rgb) straight off of a camera, I have converted it to CMYK as this is a photograph that is going to be submitted and printed and they want it CMYK , obviously.
Now I am aware that CMYK isn't as 'colourful' as RGB so I understand that.. Only when I save my photograph and open it, it is completely different to the photoshop file. COMPLETELY! And even when I reopen it in photoshop it is different.. See the image/attachment below is Photoshop vs Just open...
I have tried just the simple
Save As > .jpg
Save for Web as Jpg
Save for Web as Png
they are all doing the same?
I use CS5 on a Mac.
I recently photographed a set of pastels in raw. The body of work has been reviewed and the final color balance has been approved by the artist. I now need to export the images from their raw files to CMYK. to provide for offset printing. Adobe provides a number of options. I am completely lost on the options to select.
Â
The Source Space is Adobe RGB 1998
Â
The Color Space Conversion Options are:
Â
Conversion Options
Â
Engne:
   Adobe (ACE)
   Microsoft ICM
   Adobe CMM
Â
Intent:
   Perceptual
   Saturation
   Relative Colorimetric
   Absolute Colorimetric
Â
Selections with Selection Boxes
   Use Black Point Compensation
   Use Dither
Â
And, of course there is a CMYK Set of selection options that I assume are based on the paper the printer will use.
Â
Do you have a recommendation on the Engine, Intent, Black Point, and Dither.
I'm currently working with PS 7.0 on a PC. Is it possible to save a graphic within PS so it can be viewed with a MAC and even manipulated by a MAC?
View 2 Replies View RelatedI have an floor plan image that is 1" = 5 meters, I need to convert this to 1/8"= 1'.
View 1 Replies View RelatedI've been using Photoshop for a while but Mom just e-mailed me a few pictures she wants to print out 8x10 (inches). How many pixels equal an inch?
View 10 Replies View RelatedI have designed a CD cover for my band that we will have professionally printed. I'm now told that having designed the whole thing in Photoshop using RGB, that it needs converting to CMYK in order that it prints out properly at the Cd Printing firm.
I have found the "image>mode>CMYK colour" function, but when I click it, it makes the whole image really dull and lifeless.
i convert an image from rgb to cmyk to be printed i loose alot of my brighter colors...namely blues....i know these rich colors can be printed...(i see them all the time on flyers and magazines)...so what can i do to keep these colors...
View 2 Replies View RelatedI'm working on an image that I imported from an .eps file. I just noticed that it's in CMYK. I'm almost done, so I can't restart. I guess because .eps files are mainly used for printing from, it defaults to CMYK. ANyway, when I go to covnert to RGB it says it may alter the appearance. I can't see any difference, but I don't want to come back and kick me later. Does anyone know of any serious problems that can arise from changin image modes halfway through?
View 1 Replies View RelatedI've found a peculiar problem with grey scale conversion in Photoshop CS5.
Â
The problem:
Â
I have black and white photos in an RGB colour space. I can't use a black and white layer adjustment because there are no color channels in the image. I used the 'image > mode> greyscale' menu item to convert to greyscale, and in photoshop there appears to be no change to the greyscale values. However, when I place the image in inDesign, it is markedly different; blacks are pure black but greys are washed out.
I print the two images side by side (RGB and greyscale) and they come out identical (though darker than I expected). Is inDesign showing RGB or Greyscale differently on screen? I have the display settings at 'high quality'.
On photo raw conversion, where is the 'restore' function on Photoshop CC?
View 1 Replies View RelatedI have a 1 bit bitmap file but when I convert to grayscale and then on to CMYK the black CMYK components end up as:
Â
C: 75%
M: 68%
Y: 67%
K: 90%
Â
I need to keep black at 100% but all the other values to be at 0%, so:
Â
C: 0
M: 0
Y: 0
K: 100%
Â
How I can do this?
How can I take a scan of a negative and convert it to a positive image with cs5?
View 2 Replies View RelatedHow do I use Photoshop to create a focus-blended image from multiple RAW files and convert the result to B&W using Silver Efex Pro in smart filter mode with *everything* non-destructively edited?
Â
I typically export files from Lightroom to Photoshop as Smart Objects. How can I export multiple files from Lightroom to Photoshop as Smart Objects, focus-blend them in Photoshop, and then convert the resulting focus-blended stack into a B&W image using Silver Efex Pro in smart filter mode?
Â
If this isn't possible, what workflow would give the closest approximation of the flexibility (being able to tweak RAW conversion without a lot of re-work of the later steps) of my desired workflow?
Â
I'm using OSX 10.7.5 on a Core i5 with 16GB RAM, Photoshop CS6, and Silver Efex Pro 2.
I'm using CS3. In the Camera Raw 4.6 import window the color looks great. When I get the image into Photoshop the color looks horrible. I know it's the color profile that Raw is assigning. My question... is there a way to disable the color profile conversion coming from Camera Raw?
I've always had great results without using profiles and now this alters my color. I've even tried to go in and force the image to use a different color profile but at this point the damage has been done by the camera raw plugin.
Is there a way to convert from Canon Raw to Adobe Digital Negative (dng) while retaining the file name? For instance, I would like for "IMG_1709.CR2" to become "IMG_1709.dng" rather than New "File01.dng". Currently, it seems to force me into choosing a new file name. I want the file to be converted but want to retain the portion of the filename that appears in front of the "." (dot).
View 2 Replies View Related