Photoshop :: Scale Conversion

Sep 9, 2007

I have an floor plan image that is 1" = 5 meters, I need to convert this to 1/8"= 1'.

View 1 Replies


ADVERTISEMENT

Photoshop :: Grey Scale Conversion In CS5

Nov 30, 2012

I've found a peculiar problem with grey scale conversion in Photoshop CS5.
 
The problem:
 
I have black and white photos in an RGB colour space. I can't use a black and white layer adjustment because there are no color channels in the image. I used the 'image > mode> greyscale' menu item to convert to greyscale, and in photoshop there appears to be no change to the greyscale values. However, when I place the image in inDesign, it is markedly different; blacks are pure black but greys are washed out.

I print the two images side by side (RGB and greyscale) and they come out identical (though darker than I expected). Is inDesign showing RGB or Greyscale differently on screen? I have the display settings at 'high quality'.

View 2 Replies View Related

Photoshop :: Changing A 'scale' Of Colors To A Scale Of Transparency?

Sep 16, 2005

is it possible to create a gradient brush with the colors fading from black to white, and then edit the colors so instead of black fading into white, it's now black fading into transparent?

(so the pixels that were pure yellow are now completely transparent, the pixels that were slightly darker yellow are now almost completely transparent, the pixels that were dark yellow are now barely transparent, and the black pixels remain completely black.)

(I was only able to do it now because I started off with that black/transparent image)

I want to do this so I can change the color of the yellow.. I could use replace color,

What I'm basically trying to do is be able to change stuff in images/screenshots, like add a pattern to a white shirt (so, get rid of all of the white), but completely preserve the darkness of its wrinkles/shadows etc. A friend told me I should just desaturate it, then make it like 50% transparent, then duplicate it so there's 2 of those layers.. and add the new pattern behind it. But it doesn't look that good..

View 9 Replies View Related

AutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored

Apr 13, 2012

I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command.  Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor.  While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems.  I also have the same issue when trying to scale an existing line or block, most times but not always.

Here is a copy of the command line while I am trying to make it work:

Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:

Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.

Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.

If you notice, it does not give me the chance to enter a scale factor.  As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor.  I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?

View 9 Replies View Related

Revit :: How To Assign Desired Scale Of Plan On One Sheet Without Affecting The Scale On Other Sheets

Sep 2, 2012

I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.

The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale.
When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.

Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?

View 4 Replies View Related

AutoCAD Civil 3D :: Label Styles Annotation Scale Versus Viewport Scale?

Jun 26, 2009

am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.

I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.

The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.

I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".

Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.

View 9 Replies View Related

AutoCAD 2010 :: Scale On Printed PDF File Not Matching The Plotted Scale?

Jun 27, 2012

We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.  

For example, there is a dimension labeled on the drawing of 200 ft.  However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the  2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).

In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):

Printer/plotter selected: DWG to PDF.pc3

Paper Size:  ANSI full bleed B (11.00 x 17.00 Inches)

What to Plot:  Layout

I don't have a plot scale scale other than the default 1" = 1'

No plot style selected

Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):

Printer:  The printer I use (Konica Minolta c650 Series PCL)

And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"

** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off).  See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.  

I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file.  I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine. 

View 3 Replies View Related

AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object

Jun 27, 2013

When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on.  First of all, the units default to decimal, and I want them to default to architectural, with feet and inches.  I have to type UNITS in the command line every time I open a new drawing in order to adjust this.  I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up.  Just to let you know, the program I am having this difficulty  with is part of a package called Autodesk Building Design Suite 2013.  I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.

The scale of the objects I draw vs. the scale of the drawing field is very out of proportion.  What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum.  I should be able to see the object in it's entirety.  In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length.  I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Set Plot Scale By Annotation Scale?

Aug 9, 2012

I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with

(setvar "filedia" 0)

(setq a (getstring (getvar "cannoscale")))

(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")

Setting the plot scale with !A causes the lisp to fail.  However, when running each prompt through the command line individually, !A works fine.  what is missing?

View 2 Replies View Related

GIMP :: Dot Button Beside Scale That Auto Sets Scale Back To Default?

Jan 5, 2012

When I'm editing pix, and need a quick large solid brush for a couple seconds, (1-inch dia), I slide "scale", but it's nearly impossible to manually rest scale back to default without restarting Gimp...

Can there be a dot-button beside scale that auto-sets scale back to default..? and/or a timer on scale changes that resets scale back to default after ten-seconds..?

View 2 Replies View Related

AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012

Nov 22, 2013

I am trying to insert a block into a file in Acad 2014 and it comes in too large.  If I insert the same block into the same file using Acad 2012 it comes in at the correct scale.  Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.

There must be some variable or variables I'm missing.

View 3 Replies View Related

AutoCAD Architecture :: Synchronize Annotation Scale To Viewport Scale?

Mar 29, 2011

I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.

When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.

I was expecting the Annotation Scale to synchronize to the Viewport Scale.

Is this how it is supposed to work? and why does a locked Viewport Scale change?

View 2 Replies View Related

AutoCAD 2013 :: Block To Scale Based On Plot Scale?

Apr 19, 2013

I have a block that i would like to scale based on the plot scale when plotting.

We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.

Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?

View 1 Replies View Related

AutoCAD Civil 3D :: Making Annotative Scale Different From Viewport Scale

Nov 8, 2013

I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).

I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.

Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.

I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.

View 3 Replies View Related

AutoCAD Inventor :: Scale A Part With Different Scale Factors In 3 Directions

Apr 15, 2013

I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.

Is this even possible? How do I go about doing it?

View 9 Replies View Related

AutoCAD 2013 :: Viewport Scale List - Zooms With Each Scale

Sep 6, 2013

AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.

View 1 Replies View Related

AutoCAD 2010 :: Annotation Scale Is Not Equal To Plot Scale

Mar 15, 2011

I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.

Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?

I press yes, I print it and the outcome is always a bit smaller than it should be.

When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Quicker Alternative Changing Annotative Scale In Object Scale List

Apr 10, 2013

I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list.  Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale. 

View 3 Replies View Related

AutoCAD 2013 :: Change Global Scale Factor Or Current Object Scale In Specific Paper Space

Apr 10, 2013

I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,

the other page will be affected...

View 4 Replies View Related

AutoCAD 2010 :: Imperial Scale Not On Scale List

Feb 7, 2013

My scale list has metric list on it as it suppose to have both metric and imperial scale.

Screen shot..

View 2 Replies View Related

AutoCad :: Understanding Drawing Scale And Scale Factor?

Jul 8, 2004

I am having some problems getting the hang of applying the drawing scale to my assignment. I understand the scale factor that is applicable to the printing only and that AutoCAD doesn't care about the units used...but something is not clicking here and I'm sure it is pretty simple. My assignment requires me to draw 3 simple structures at 1/8" scale on 11X17 paper. Each house is 20' long with 10' walls and each is done in absolute, relative, and polar. I actually completed the work with all 3 formats without specifying the scale or paper size, just to get familiar with the commands. But now that I am trying to set the dimensions correctly, I cannot replicate my work because I'm getting lost in the way things are defined. I am using AutoCAD 2005, also have a 2002 version to which I can defer.

View 9 Replies View Related

Revit :: Detailing Scale Linked To Hatching Scale

Jun 26, 2012

I created a wall detail in a scale of 3/4"=1'  and when I change the scale to 3"=1' the hatching becomes smaller.  I want the hatching to get larger without having to redraw it. 

View 1 Replies View Related

3ds Max :: Yellow Scale Triangle Is Missing When Click On Scale?

Feb 20, 2014

Yellow Scale Triangle is missing when i click on scale in 3DS Max 2014. i saw it earlier on the screen, but now it is gone. all the scale tool does is move the object up or down. (no matter what axis i move it.) 
 
did i press something or this is a glitch in the program?

View 2 Replies View Related

3ds Max :: Unit Scale / Display Scale And Working Units?

May 14, 2012

there's a bug in my file. but

system unit is set to 1cm.

display unit is set to 1mm.

I measure the geometry at the side. its about 6355mm

I put a dummy @ base where I measured it with the tape measure.

I move it up 6000mm and it goes way off.

View 2 Replies View Related

AutoCad :: Annotation Scale Does Not Equal Plot Scale?

Sep 20, 2012

I do warehouse layouts: circles, squares and rectangles. I don't know a thing about these scales.

I get this message when i try to print D-size drawing. Received this drawing from outside source and need to print.

View 4 Replies View Related

Photoshop :: Conversion From PC To Mac

Jun 21, 2013

I recently switched from a Dell PC to a Mac and wondered if there is an exchange program or an upgrade change to keep from having to buy a whole new copy for the Mac. 

View 2 Replies View Related

Photoshop :: Raw To JPG Conversion

Mar 3, 2009

I use CS3, 3gb of Ram and more then 50mb of free hard disk space.

When I convert a Raw image to Jpg the file size is reduced but opened in CS3 the Image size appears unchanged. What is the correlation between image and file size? I thought the Image Size was the horizontal number of pixels x the vertical. If this is correct and the jpg has less pixels how can CS3 show it as having the same image size?
in addition what is the use of Image Size other than to indicate the print size at a given resolution?

View 2 Replies View Related

Photoshop :: 565 RGB Conversion Within CS3

Apr 20, 2009

I am working on Photoshop CS3 with 24 bits Bitmap files.

I would like to know how to convert a 24 bits Bitmap files to 565 RGB files.

View 5 Replies View Related

Photoshop :: RGB Conversion

Mar 6, 2008

Opening Nikon D300 jpg image (Bridge CS3/file/open with/photoshop) does a sRGB->aRGB conversion. Why?

The D300 metadata shows Color Mode RGB and Color Profile sRGB IEC61966-2.1 so that looks good. PS Color settings/Working Spaces/RGB is set for aRGB and Color Settings/Color Management Polices/RGB is set for Preserve Embedded Profiles (and the three check boxes are checked). I expected the sRGB embedded profile to be preserved but that isn't the case.

View 12 Replies View Related

Photoshop :: RGB To LAB Conversion In CS3

Aug 11, 2008

I like to use LAB fairly often and have done so in CS2 with no trouble. I'm on Windows XP Pro, 1 gb RAM.

Now that I've loaded CS3, same image converts to black. All over black. Edge to edge black. I mean BLACK!

All channels are active (L, a, b). No mask is in effect. My working
space is ProPhoto.

If I convert it back to RGB, the image is still there.

What's going on here with CS3? I've done the usual color settings. I've deleted my preferences.

Also, when loading PSCS3, a message always pops up saying "there must
be at least one document open to run this script!" Don't know where
that comes from either. I'm not trying to run any script, just opening Photoshop?

I'm thinking I'd better uninstall CS3 and start over. Before doing
so, though,

View 1 Replies View Related

Photoshop :: RAW To JPEG Conversion?

Sep 29, 2012

I have recently switched to shoot my photos in RAW format. I do the usual adjustments in Camera Raw and the hit "Open Image". Next is that I save my image as JPEG with the Maximum Quality. Once I look at my saved JPEG file though I find that most of them have a lot of noise and seem not to reflect any adjustments that I did to the RAW file.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved