For some reason, every time I draw, I'm not getting accuracy from within that circle, but it's like the paintbrush tip is on the top-left OUTSIDE side of the circle.
Using Photoshop CS6 Extended. Genius tablet.
how to edit it so that you don't have to select a specific brush for sensitivity? ALso, is there any way to make the brush sharper and cleaner? It just looks blurry.
When I use the paint brush tool with my mouse, color set to black, it works fine. But when I use the tablet pen, it draws this fuzzy pinkish black color. What's the problem and how do I fix it?
View 2 Replies View RelatedI have a Trust Slimline graphics tablet (TB5300) and lately i've had the problem that when i open photoshop, the cursor sticks to the left-hand side of the screen.
So I move the pen about the page and the cursor moves only vertically along the leftmost edge of the screen.
This doesn't always happen, but i'd say it's the vast majority of the time lately. The tablet works fine when I close photoshop.
I'm trying to install a graphics tablet on my computer (Dell, Windows 64-bit), but for some reason it wasn't working with my Photoshop CS6 Extended. I was advised to uninstall Photoshop and then re-install in order to get the tablet to work with it. I have the Creative Suite 6 Design and Web Premium but I only uninstalled Photoshop Extended specifically.
Now that I'm going to re-install Photoshop, I'm unsure what to do. Do I download the trial version of Photoshop Extended and then put in my serial number? Or should I uninstall all of the Creative Suite and then re-install that?
I am running Photoshop CS5 Extended on my Windows 7 64bit. I recently decided to try a new drawing tablet i got, a rather "offbrand" one. It is the Auro II, made by a company called braVod. While the tablet works great, in Photoshop i cannot get the pressure sensitivity to work. Photoshop is up to date, and I have the latest driver for the graphics tablet (that being said, it was rather difficult to find any driver for the tablet online...).
View 3 Replies View RelatedI'm having the problem with pen cursor when i use dual-monitor.
Before I run GIMP everything work fine, The pen cursor can move in both monitors.But when I run GIMP, It lock my pen area into only the main monitor, even if I close GIMP. So I need to restart my PC to use both monitor with my pen.
It seems to be fine locking pen cursor area in a single monitor, But GIMP cursor IS NOT CORRECT with pen cursor. They both should be the same, But they are not. As you can see in the photo.
I've tried changing the input mode for tablet to Screen and Window. But it still doesn't work.
PS.I'm running GIMP in Window 7 (32Bit), My tablet pen is Kanvus Life H85
For the past 2 months I've been using a Yiynova 10.1 tablet to design in Illustrator CS6. Later today I have an issue where the cursor would be on place but immediately move to a random area on screen. It is quick and I can keep my pen to point where I need to. However, everytime when I do close Illustrator the tablet seems to work perfectly. Photoshop and other programs seem to respond well with the pen and tablet, but Illustrator doesn't. I have ran a windows compatibility to all previous versions of windows and there are no results. I have reinstalled my Illustrator CS6 and the tablet doesn't want to play well still.
View 2 Replies View RelatedToday I was playing with brushes and then all of a sudden my cursor disappeared from my workspace, but if I move the mouse around I can see it outside of the workspace area. I'm really not sure how to overcome this, or how it happened, a complete novice with PS. If I was using psp I would be able to rectify the problem as I've used this program for years.
View 2 Replies View RelatedI recently had to reinstall my OS (Win 7 64 bit) and after doing the same to my photoshop program, I now get a flashing cursor that changes to a waiting circle. Other post talked about DPI and Java, which I have checked and still have the same problem. I've had the program installed on the same computer without this problem, and the setup is the same with the usual update in drivers.
View 17 Replies View RelatedI am using photoshop. the icon for cloning is a circle...it changes to a cross. i need to use the circle. how do i get it back
View 1 Replies View RelatedCursor does not change to a circle when using the eraser.I'm sure it must be a tick box somewhere.
View 1 Replies View RelatedUsually the tool cursor is a circle the size the tool is set to, that is, it will be 60 pixels in diameter when the tool size is set to 60 pixels. Sometimes, the tool cursor changes to a gun sight-like icon. I have no idea what I'm doing to cause that, but I'd like to know in order to 1) stop doing it, and 2) maintain my sanity.
View 4 Replies View RelatedHow can I change my clone stamp brush cursor from a cross back to a circle?
View 3 Replies View RelatedI want to add a cursor that I have made to my GIMP program. I have made one in the form of a circle. I have changed the extension to .cur, but what folder it needs to go in when I use the "Associate File Extension" facility in Windows 7.
View 1 Replies View RelatedI hooked up a VisTablet drawing tablet and am using Photoshop CS2. With the mouse, I can draw curves, zigzags, whatever, but with the pen, I only get straight lines. Is there an option or a preference that makes this do this? How can I undo it if there is one?
View 1 Replies View RelatedI recently upgraded to CS4 from CS2.
When I'm drawing with the Pencil tool at high magnification (1000% or more, doing icon work), the actual pixel changed is not the pixel I click on half of the time. In fact, it often is up to 20 pixels away, so it's not just some snapping problem. Half of the time, it doesn't even change any pixel in my icon (presumably, trying to change a pixel outside the smallish image).
Do I call support to get this logged and have to wait for a fix? Or is there some work-around?
I'm trying to change the color of an image by using pencil, but even though I change the foreground color in Toolbox, the pencil only draws Black.
View 1 Replies View RelatedI want to produce a brush that draws a row of buntings all attached to a rope or tape either using a graphic or a jpg. I have tried everything I know but for the life of me cannot get it to work. I can get the little flags to draw but not from a continuous line.
View 9 Replies View RelatedI seem to be having an issue with polylines and a few other things like rectangle, they will only draw in up and down movements and not draw to the left or right.
View 4 Replies View RelatedAfter a linetype thad draws double and triple lines.
View 6 Replies View RelatedCurrently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
A friend recently installed photoshopCS3 and she asked me why her lines were choppy. So I looked at her file and sure enough it looked as though there was no anti-aliasing.
So I'm no expert and the only plac I could find out about the anti-alias are the little check boxes under the selection tools. Is there something else that woul dmake this happen? it just shows the black line with no tranparent pixels on either sides etc...?
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedIn Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedTrying to lay a dime on a nickel, without the "squares". In otherwords, how do I cut out each coin and lay them on top of each other so each coin shows and isn't hidden by the top coin?
View 2 Replies View RelatedI've been considering getting one of the Wacom Intuos4 or 5 small tablets to use while working in PS. From what I've read they really make editing and, just working in PS in general, much easier.
View 9 Replies View RelatedI just bought myself a new digital pen by e3Works. It is pressure sentitive, giving greater width in response to heavier pen pressure. I don't always want this feature. If I am trying to paint an accurate mask, I might want the width to be consistent, regardless of pressure. This pen does not have a software interface of it's own. Can I make such a change within Photoshop?
View 2 Replies View Related