Photoshop :: CS6 - Difference In Speed With Only 512MB Video RAM
Jun 24, 2012
With regard to PS CS6: I'm specifically interested in CS6's ability to utilize video memory to make PS faster, more powerful; but will I notice a difference in speed/performance with only 512MB video RAM? Currently running PS CS5 on an iMac (Duo-Core, 8GB RAM, 512MB Video RAM).
Was hoping Apple was going to release new Mac Pro (been saving dough for a few years now). Since that didn't happen, sticking with current Mac setup for at least another year, and this includes a video card that only has 512MB memory.
Is it worth it for me to upgrade to CS6 with regard to speed/performance?
View 3 Replies
ADVERTISEMENT
Jun 19, 2012
I am running CS5.5 on a new machine and it is taking 3x longer to open a 28.9MB file than it does on my six year old machine running CS2.0.
View 4 Replies
View Related
Dec 31, 2012
i an having trouble accessing this function. I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion. I know this can be done
View 3 Replies
View Related
Nov 23, 2011
I'm near completion of a year long video project. I inserted several HD video clips into my VS X4 time line which includes many other HD/SD and .jpg clips along with transitions, music, etc. For effect, I used the tool in VS to speed up two or three of these clips by about 300%. Without the effect, the scene doesn't work so I'd like to keep it this way.
I noticed that when playing the clip in the time line after the effect is added, it plays very jumpy and jerky. Without the effect it plays fine as do all the other clips in my project. I am guessing the effect puts a strain on the system but mostly, my system is fine. However, the hard drive may be the culprit and not able to get the data fast enough to provide a smooth video. Is that possible? My cpu (core 2 quad Q6600 clocked to 3.0 g), new video card, memory, and monitor (HD certified) are all new and well within spec.
My question: Do you think the stuttering video will also be present in the final burn of a Blu-Ray? Or is this just a function of the preview window?
View 4 Replies
View Related
Mar 25, 2014
I want to film my CEO standing on London Bridge as people walk over it. The trick is is that I want to film him at normal speed (for obvious reasons), and i want the people walking past us to be shown at double the speed.
Having thought logically I guess I need to film people walking over the bridge separately from filming my CEO, then somehow superimpose him on the that footage.
View 4 Replies
View Related
Dec 17, 2013
I am trying to edit a video for a friend. He shot the video with his phone and it shows up sideways when it is imported to Premiere. Everything works fine till I rotate is 90 degrees. When I rotate it the bar on top becomes red. The audio and video still play perfectly fine though. When I render the video and it plays back, the audio stays the same, but the video speeds up by almost 10 seconds. Also, when I try to just start over with the clip and just reimport it, it will only let me add audio to the sequence. The video plays in the preview, but will not add to the sequence after telling it to render the first time. I have deleted the project, all prefrences for Premiere, and even did an uninstall and reinstalled it.
View 2 Replies
View Related
May 24, 2011
Does a Sata hard disk drive of 5400rpm allows successful capture of video via Firewire. I checked the boxes which v10+ and Pro X3 but they do no state this.
I am contemplating purchasing a notebook which has a Sata HDD of 5400rpm and Intel Pentium Centrino Duo (dual core 1.83GHz) - the CPU should be fine I think but what about the HDD? I think that when I first started video editing (VS v 6 I think) that I only had a 5400rpm drive and had no problems but just wanted to be sure. Oh yes the notebook does have a firewire port.
View 6 Replies
View Related
Dec 11, 2011
I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies
View Related
Aug 20, 2013
What is the difference between the Video track and the Overlay tracks?
I noticed that I cannot trim the "overlay" clips, but when I added some screen recording to my folder and placed it on the timeline, it automatically goes to the Overlay track. And from there, I cannot trim them as the scissors icon is greyed out. Is there a way to add those clips to the video track instead of the overlay track if there is no other video in the way?
View 13 Replies
View Related
Aug 16, 2009
Whether there is a difference between 512 and 1024 videomemory for Photoshop CS4?Whether the volume of videomemory will be important in the future?Now I choose a videocard, 512 Mb or 1024 Mb?
View 7 Replies
View Related
Feb 29, 2004
I have CS and 7 on my machine. I opened the same picture first in CS then in 7. Then opened another picture first in 7 then CS. Both times 7 opened the picture at least 3 times faster. Is this normal for CS?
View 3 Replies
View Related
Oct 27, 2013
I'm running an older system (WinXP 32-bit, 4 gigs of DDR2 RAM (733 mhz), lots of hard drive space (more than 1TB), 1-gig video card (ATI Radeon 4xxx series), 3GHZ intel dual-core processor, Photoshop CS5
I do a lot of painting, and some of the brushes I have are a lot slower than others. Example- some brushes produce almost no lag, while others produce severe lag. (The slower brushes tend to have a lot of settings in the brush panel such as texture, scattering, dual brush, etc)
I'm planning to upgrade my system soon - I'm considering 8 gigs of DDR3 Ram (2400mhz), a 3.4GHZ i5 quad-core processor, an upgraded ASUS motherboard, and probably stick with the remaining hardware for now. I'll eventually move on to 16GB of RAM. I will also be using a 64-bit version of XP and maybe even go up to Windows 7 64-bit (If I can set aside the time for all the headaches that come with something new like this)
My question is, with an improved system like this, would I expect to see the lag drop significantly on these slow brushes? Or is it just the brush itself which is slow and an improved system will have no impact? I do very little in the way of filters, 95% of my workflow is pure painting with a variety of brushes and not too many layers for the most part (usually less than 50 and closer to 10 on average). So my main concern is trying to remove the slowdown when painting.
View 4 Replies
View Related
Jul 26, 2013
I recently used Migration Assistant to move my entire system from an old iMac (32 bit) to a new iMac (64 bit) running OS 10.8.4. I assume my Photoshop CS 5 installation still thinks it is running on a 32 bit system. How do I tell it to now run at 64 bit speed? The option no longer appears in the Info>General menu selections.
View 3 Replies
View Related
Sep 3, 2003
I know I've seen this somewhere here, but I can't find it by searching, and I've spend this morning and a while last afternoon trying to look for it in various sections...
There is a way by using the "single column marqee tool" to get a part of a pic to be "extended"/"drawn out"/"giving the illusion of speed"...or what eva'. I give U this...Now that SCMT (hehe..) is supposed to be transported to the right here in order to make that oval "stretch"...But HOW, god damn...?
This is prolly a basic knowledge, but I can't for the luv of it figure it out *puts tail between legs and awaits the ban*
View 1 Replies
View Related
May 21, 2007
I use the pencil/brush tool and hold down shift and draw my line, It works great for small lines, but when I have to go off my current screen space, photoshop will FUCKING FLY down to the end of the document, leaving a line through the whole thing. The area where it doesnt move the document to where it shoots down is so sensitive.
if there is anyway to change the scroll speed, so i can make my lines in peace.
View 8 Replies
View Related
Oct 3, 2008
A bit off topic, but maybe not. Information comes from file | file info in CS3.
Metadata from a jpg image show different exposure times.
First: "Exposure", giving the traditional expression in decimal form, e.g., 0.017 s for 1/60s.
Second: "Shutter Speed", expressed as NNNN/256. I am unfamiliar with this convention. How does it relate to the traditional expression?
There is also a Brightness parameter, also expressed as NNNN/256, and can be negative.
View 3 Replies
View Related
Feb 25, 2013
How do I increase cs6 3D rendering speed
View 1 Replies
View Related
Nov 19, 2013
i need to know to finish an illustration, how i can make an effect of light that there is in this picture:
View 5 Replies
View Related
May 25, 2013
I have a jpeg sequence of 165 frames in my psd animation. Upon export (as an .mov file), I need to keep frames 1-29 and 80-165 as is, but speed up frames 30-79. How can achieve this in PS CS4?
I have tried exporting each of the clips individually and then brought them into i Movie to speed up the middle portion and subsequently re-piece them all together. This works great, but I am not familiar enough with i Movie or Premiere Pro to export the file properly; it seems to not allow me to export it with the same specs (mainly size, 1280x1024 at 30fps) as my source files.
View 2 Replies
View Related
Mar 17, 2009
I have a technical question I wonder if anyone on here can answer. I am far from a Photoshop newbie having been using it from version three, but rarely get the chance these day to fathom all the new widgets on new versions.
For many years I have always hoped that Adobe would include a filter for a speed blur. I know it does a motion blur, but what I want is a blur that show the direction of the apparently moving object. I am working on a project where I have animated a chilli on the companies web site where it flies around. I want to give the impression of movement with the blur coming from the tail of the chilli for a leaflet.
Here's the image I am working with, though it looks a bit crap here as it's cmyk.
View 1 Replies
View Related
Jan 31, 2008
with Photoshop CS3 on XP-Pro and would really like to learn if there is some why to get it to work as well as PSCS2 (9.0.2)?
Example: I open a white canvas 20x 30" @ 300ppi. On this I 'Place' 4 small websized (400x600px) images as 'Smart Objects' and then add a layer mask to each (a 154mb image when open). Even as I'm placing the 3d image PS10.0.1 is slowing to a crawl and the scratch file has already grown to 6.3GB. Add a few layer masks and the whole thing becomes unusable. PS freezes with "Not Responding" and then 20 or so seconds later it recovers with a scratch disk that's grown by another GB. Every time I move an image around on the canvas PS freezes again. FINALLY after about 5 minutes of poking at the thing the scratch file maxes out at 8.56GB and I can then do what I want with the image and CS3 starts to perform in an acceptable fashion. If I 'purge' the cache I'm right back to the staggered performance. Same image on my laptop behaves the same and scratch file grows to 9GB.
Same image in CS2 (PS9.0.2) opens immediately, performance is right there ready to go. I can do whatever I want, as fast as I wish, and PS9 just keeps up. The scratch file maxes out at around 1.5GB.
I'm running an Intel mobo with an E6600 Quad, 4GB RAM that I run with and without the 3/GB switch (via a boot menu). Main drive is a 10k Raptor and I have two 15k Atlas SCSI drives, one empty one dedicated as PS's scratch disk. History states is set to 10 and cache to 6. This is otherwise a very fast PC that pretty well matches Mac dual Xeon's performance in the Driver Heaven Photoshop benchmark test (I was curious <g>). So why is PS-CS3 so darn Pokey :-((
I really don't know where to start with fixing this as the same behaviour occurs on other computer's I've tried it on. I have not yet seen PSCS3 perform well on ANY PC I've tried it on. Does CS3 always create such HUGE scratch files compared to CS2? Is everyone just living with this sort of performance and accepting it as the price for getting the new features? Other posts here seem to point to a 'networked printer set as the default' issue. Did that, didn't help. And if that were so easy then it would seem like something begging for a small patch from Adobe to fix it. Lots of pros out there with networked printers..
I now shoot with both a D300 and D3 so I have to use BridgeCS3+ACR if I want to continue that preferred workflow. But processing in BridgeCS3 and then working in CS2 is frustrating. Except for very basic chores I'm finding PS10 to be unusable.
Is there anything I can pull out of PS10 to get it to be more lean and mean?
View 39 Replies
View Related
Apr 26, 2005
I need to create a few mockups of an Intranet site for a project, the task can be done in HTML and CSS or using an art package.
Ideally I want to be able to change the colour of text, background colour or maybe border colours throughout the site at the change of a hex value as you would on a stylesheet.
Is it possible to group text/assign styles in Photoshop so that any changes will occur throughout my PSD file, in a similar way to styles in a Word doc?
How do you guys go about making mockups? Art package or CSS and HTML?
View 4 Replies
View Related
Aug 29, 2004
I'm trying to do is take a video file and make a part of it into an animated gif. I only just got Photoshop CS (Version 8.0) and so I'm still a bit of a clutz with it. What I'm doing is going into ImageReady and using the "File > Open" option to open the video, I edit it down to the length I want with the dialog that pops up. Then I adjust the video and canvas size to my needs. But I can't find any option to control the speed. While I'm editing it the animation runs in slow motion, and when I save it to gif it still runs in slow motion. However, if I save it as a QuickTime file or something, it runs at normal speed. How can I change the frames per second or at least get it to run at the normal speed it does in the video for a gif file?
The only way I've found so far is to edit out frames from the animation, but then it comes out choppy. I've asked in several other places and looked at tutorials and they say to use the "File > Save to web" option. But there does not seem to be any such option and I think they may be referring to older versions. How can I do this in the version I have?
View 1 Replies
View Related
Oct 5, 2012
I've read so many forums where people's computers are just completely bogged down when running Photoshop CS6. Mine is. Two of my contractors computers are.
That's 3/3 for people who have just upgraged to CS6. Does this seem "random"? No. What's going on and why is Adobe saying there isn't an overall problem. If Photoshop CS6 is running, it completed kills the speed of the Finder, or any specific app I've got running — even illustrator.
The amount of time I've sat back just waiting for my computer to become responsive again is just absolutely unbelieveable. I've got a gazillion projects and deadlines I need to get done and CS6 is literally killing me...
View 4 Replies
View Related
Jun 29, 2012
I love Photoshop CS6, and my absolute favorite new feature is the Color Lookup adjustment layer. So far, I've been extremely happy with the effects I've been able to pull off by combining that with other adjustment layers, channel work, etc.
However, I've gotten to the point where I realize that my next step -- much like a user who graduates up from using actions he/she downloads off of Deviant Art -- is to make my own color look up tables. The only tool at my disposal for this is Speed Grade. (I have a CS6 cloud membership -- off topic, but way to go, Adobe, that made it feasible for me to "graduate" from only having Photoshop CS5.1 to having the full suite at a very reasonable price!)
I've used Speed Grade on video clips I've shot with my Canon 5D MkII to great effect. Nothing I'd post publicly yet (I'm still learning how to shoot motion), but I considered the results to be very positive. I've managed to save several test .look files, as well, both on video footage and still images (JPGs, to be specific).
I always shoot RAW, and my usual workflow is to start in Aperture (I'm a Mac user), do some basic RAW adjustments, then export a 16-bit PSD and get down to the real work in Photoshop. SpeedGrade doesn't yet seem to support PSDs natively, so in order to create a .look which is appropriate for my image, it currently looks like I need to export a JPG (down to 8-bit sRGB, ugh) from Photoshop, then open THAT in SpeedGrade, do my work, save my .look, go BACK into Photoshop, and use the .look file there.
I could live with that if -- IF -- the .look file actually gave me my expected results. However, the only time the .look behaves exactly the same in Photoshop as it does in SpeedGrade seems to be if I open the image as a JPG -- thus losing all my layers, adjustments, smart objects, etc. When I apply any of my .look files to a PSD, they come entirely too dark, every time. Many of them have simply turned an image into a large 22 megapixel black rectangle.
So my question is this: How do I make a SpeedGrade .look file behave predictably in Photoshop, in a 16-bit-per-channel PSD file? I'm OK with changing the color space if I have to (even if it's to sRGB, the bane of my existence) -- but I need to see the same thing in SG that I do in PS. Is this possible today, or am I waiting on the next SG release? Or, and I assume this to be the case -- as I'm a software engineer by trade, and know that this is almost always the case! -- is this a case of user error? And if so, what can I do to correct my user error?
Or, sacrilegious as it may seem since I have all of Adobe's tools, are there other Mac-based products I can use to create color look up files compatible with Photoshop?
In case it matters, here's my platform:
Canon 5D MkII, latest firmware, always shoot RAWApple Aperture 3.2.3. Mac OS 10.7 (late 2011 MacBook Pro 17", 16 GB RAM)Adobe Creative Suite 6 Cloud Subscription (photo, illustration, video tools installed; no Flash nor web tools)
View 3 Replies
View Related
Jun 24, 2011
So I'm always interested in what others use for gear as well. As a photographer myself comparing gear is quite common. I thought I'd ask what people are using for their photoshopping. I figure some use mouse, trackball, tablet etc.
I run a Sony Laptop and a Wacom Intuous 3 tablet. I run the tablet for the incredible speed and accuracy. I do have a large monitor on my second lappy in the office, but rarely use it. I find that screen size isn't that important to me, i just zoom in when I need to work on details.
View 1 Replies
View Related
Sep 19, 2013
Photoshop (any version) has historically had an issue with typing speeds. If you type too fast, double letters will come out as single letters. The previous line would've looked like this: "If you type to fast, double leters wil come out as single leters"
This mainly happens when typing fast, and any of these conditions are met:
- the file is big
- you haven't restarted photoshop in a while
- you've been doing some work (lots of history states)
Basically, as soon as the memory fills up, Photoshop's responsiveness becomes pretty poor when you're typing.I don't expect a solution for this, other than a patch/update, since this is an issue on any machine with any (performance) settings.
View 10 Replies
View Related
Dec 31, 2007
I don't know why, but PS is a BEAR to deal with when drawing out shapes up close (to get pixel perfect position)
As I draw it I have to move the cursor "off the screen" to get it to start creating the object while it's moving the canvas over.
But it moves SOOOOO slow! I mess with 1400px wide images and I'm zoomed in quite a bit, and it seems to move by 5 pixels a second. Is there some trick to speeding this up? There's only 20 or so layers.
View 2 Replies
View Related
Oct 7, 2013
Is there a way to speed up the entrance of text animation using Elements 10?
View 2 Replies
View Related
Jul 25, 2012
I use CS5 on Win 7 64-bit. Today I learned about this option to disable file compression to speed up save time:
[URL]........
I downloaded the reg key and installed it. When I restarted PS to test it on a file, there was no difference in either save time or file size. The test file is a 300 MB multi-layered PSD file.
View 21 Replies
View Related
Feb 13, 2014
I upgraded to Maverick last fall which caused my PSE11 to slow way down so I recently purchased PSE 12 thinking it would be compatible to Maverick. At this point it is not. Everything works even slower than it did with PSE 11. Is there a patch or an upgrade or a procedure that will improve the work flow speed?
View 3 Replies
View Related
