Photoshop :: CS5 Curves Layer Dialog?
Jun 27, 2011
In CS5 is there any way to have the Curves Layer Dialog revert back to the old standard interface? When you click Image/Adjustments/Curves you get the standard interface. But when you create a curves adjustment layer you get a horrible new interface, which has been "improved" to the point of being totally useless.
I recently upgraded from CS3, mainly to get the latest ACR to work with a newer camera's RAW files. I use curve layers extensively and have spent a lot of time with CS5, but the new curves layer interface is so incredibly difficult and exasperating that I have now reinstalled CS3 and use it for all my work. I use CS5 to convert from RAW, save as PSD, then open the file in CS3 to do the work.
View 8 Replies
ADVERTISEMENT
Oct 29, 2012
Is there a way to create a curve in the curves dialog box with points of non-differentiability (i.e. sharp corners) such as the following:
I was almost positive that there was a way to convert a point added to a curve in the Curves dialog to be a sharp corner, but I can't seem to locate it now.
View 9 Replies
View Related
Jul 16, 2012
CS6 is consistenly locking up in the selective color and curves dialog. i.e. I come to the selective color dialog and try to choose the reds and it is stuck on whites, which I used last and I can't change it. I have to quit and relaunch. The same thing is happening with the Curves dialog. I can edit the RGB curve , but can't select the R, G or B channels until I relaunch. It works for a while and then it just stops.
View 4 Replies
View Related
Mar 23, 2013
Using CS6, try to open a curves adjustment layer...the way I have for years...levels opens. Will not correct. Have to close the app and reopen. Impossible to find on internet. What's up?
View 21 Replies
View Related
Jun 21, 2013
Just upgraded CS6 to CC and really enjoy a lot of the changes but there seems to be a bug with the adjustment layer curves (not regular curves).
If I make a change to the curve using modification point and then toggle "undo", the preview of the image will toggle on and off with the change but the modification point does not reset. This point stays in the original position even if the curves are not in effect and will only reset when another layer is selected before returning back to these curves.
One must also manually reset the point if you wanted to revert back to the original (instead of undo) because if you place another modification point on the curve it will revert back to the change you made earlier.
View 12 Replies
View Related
Jan 5, 2013
Many Photoshop users consider the Curves panel to be Photoshop's most important feature. For many Curves users, the Layer panel introduced in CS4 does not offer the speed, the instinctive use, nor the superior results of the older Curves Layer panel.
The Curves dialog includes all the features that long-time users rely on. Some of these features have not been included in the Adjustment Layer version. They should all be available in the Layers panel, too.
View 14 Replies
View Related
Jan 7, 2013
I have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
View 4 Replies
View Related
Jan 18, 2013
I'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
View 2 Replies
View Related
Mar 24, 2012
After doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
View 1 Replies
View Related
Apr 10, 2013
In previous verions of Photoshop, when I made a curves adjustment layer, selected the midpoint, then did a shift-arrow adjusstment, it was always in increments of 10. Now in CS6, it is 12 on my machine, 13 and 14 on the two other machines in the office I have checked. Why would that be? Can that be changed so it is 10 again?
FYI - this is all in RGB mode if that matters.
View 12 Replies
View Related
Nov 6, 2013
In CS3, CS4 and CS5 I was able to:
(a) add a point (corresponding to the position of the Eyedropper Tool on the image) to the RGB composite curve by Control + Clicking; and
(b) add a point (whilst focused on the RGB composite curve) to each of the Red, Green and Blue channel curves by Control + Shift + Clicking.
Neither approach seems to work in my CS6 (PsCs6 x64 latest update, on Win 7x64).
View 2 Replies
View Related
Jan 12, 2013
My curves layer sliders seem to have been reversed. I would like the curves layer to show the black point slider on the left and the white point slider on the right.
View 2 Replies
View Related
May 20, 2012
Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable.
But I can still access the RGB channels using the Alt + 3, 4 and 5 shortcuts. This behavior doesn't occur on my workstation, and if I don't crop the image, the drop-down menus work fine. I have the crop tool set to delete pixels. Also, if I apply curves directly (not with an adjustment layer), the dialog box works OK. And the other adjustment layers seem to be working, too. It's only the curves layer that's doing this.
View 5 Replies
View Related
Dec 11, 2012
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
View 2 Replies
View Related
Oct 25, 2012
Adjustment layer- curves. I have always used a Curves Adjustment Layer in CS3 to brighten images and increase contrast. I have just upgraded to CS6 and when I open the adjustment layer and try to Command Click choose points in the photograph to drag the line up or down to darken or lighten I get instead some crazy saturation changes.
View 4 Replies
View Related
Apr 27, 2012
On on of my drawings that I created, some of the layer names are highlighted in light blue. What does it mean, and how did it do it?
View 3 Replies
View Related
Oct 27, 2012
I've been working with Mac CS5 since it came out. And Mac Photo Shop in general since the early 90's. That said. This just started today right in the middle of a project:
Normally I hold down my Option Key and drag a layer down to the New Layer icon at the bottom of the Layers pane. Now I get a dialog popping up asking me if to give the duplicate a name (if it's multiple layers), or to ask if the default name is OK.
This wasn't happening earlier in the day. Why has this all of a sudden started happening? How can I turn the pop-up off? I've tried resetting the prefs with Cmd-Opt-Shift on reopening PS5.
Yes, I know I can do this with Cmd-J, but I've doing the Opt-Drag methods for many years, and that's now how I'm used to working. Running i Mac with 8 GB RAM, OSX 10.8.2. RAM usage set to 70% default. Photo Shop CS5 10.0.4 x32.
View 2 Replies
View Related
Nov 22, 2012
When creating a new layer and holding ALT I do not get the dialog box to appear the new layer is just created. I've tried to reset my preference twice and this has not work.
View 6 Replies
View Related
Oct 27, 2012
I've been working with CS5 since it came out.This just started today right in the middle of a project:
I hold down my Option Key and drag a layer down to the New Layer icon at the bottom of the Layers pane.I then get a dialog popping up asking me if to give the duplicate a name (if it's multiple layers), or to ask if the default name is OK.
This wasn't happening earlier in the day.Why has this all of a sudden started happening?
How can I turn the pop-up off?
View 5 Replies
View Related
Feb 23, 2013
I am preparing a batch of images for test submission, for a stock photo library.Recently a person working for one of the visual effects studios in London happened to tell me that these strict agencies use some set of layers that can separate tonality and color values to check for banding, dirtiness, noise and all those technical flaws that the human eye can't notice on a monitor.He said they perhaps have an action for it so that they can review faster.
He said that it is known as 'Craze Curves' or 'Visibility Curves' technique.He further added that all the studios use it before giving the final files to clients so that there is no issue in printing afterwards.It is sort of a quality control check and has been used by digital and advertising agencies all over the world.
But now his email seems to have changed and I can't get in touch with him to know how to use the technique.
View 1 Replies
View Related
Mar 23, 2012
How I got this annoying display at the bottom of my layer dialog box...???...
"All: 197 layers displayed of 197 total layers"
it covers up the slider and the bottom 2 layers in the dialog box so I can not see or edit them...I will try to attach a screen cap to show you what I am talking about...
View 4 Replies
View Related
Aug 27, 2012
I'm having an issue where the Layer Properties Manager Dialog Box appears to be anchored. Meaning I can't move or resize the dialog box.
View 4 Replies
View Related
Nov 6, 2013
This problem just started when I upgraded to 2014. When I try to set up layer filters the Layer filters properties dialog box does not show. I'm guessing the function is working its is just that the dialog box is poping up somewhere out of view of the monitors, forgot to mention it is a 2 monitor set up.
View 2 Replies
View Related
Jun 26, 2013
I have a user who is experiencing a blank or improperly rendered layer dialog box from time to time (see image attached).
I've seen this with another user at a different office as well. I assume its a video driver issue but as I'm strictly a CAD manager and not IT support, messing around with that is outside my responsibilities.
A restart usually fixes the issue but I figured I try to at least find out of its a known issue with a known cause (and a known fix).
View 1 Replies
View Related
Jun 12, 2012
My issue is with the Publish dialogue. I am publishing several sheets to PDF. I do not want layers to be available in the PDF. I shoud be able to control whether or not layers export with the PDF in the "Publish dialogue box > Publish Options > General DWF/PDF options > Layer Information" (then there are two options, either to include or not include layer information). However, when I change it to "don't include" and close out of that box, the main Publish dialogue still shows the layer option as included and the layers are in the PDF after I publish it. why the layers still show up?
View 2 Replies
View Related
Apr 18, 2013
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies
View Related
Aug 1, 2013
I'm attempting to create an easier way to change layer colors of nested linework by selecting the linework and having the ACAD index color dialog box appear to select the replacement color.
defining the "ic" variable;
(defun c:clc (/ ent ent_data ic ent_lay) ;change layer color(setq ent(nentsel)) (setq ent_data(entget(car ent)))(setq ic ;index color(cdr(assoc 62(ACAD_COLORDLG))))(setq ent_lay(cdr(assoc 8 ent_data)))(command "-layer" "c" ic ent_lay ""))
View 3 Replies
View Related
Jul 3, 2008
how to use Curves, in CS3.
View 6 Replies
View Related
Jun 26, 2013
How do you get bezier curves in PhotoShop CS6 to act the way they used to in CS5.5? In 5.5 i would be able to move/adjust the path with the direct select tool and the control arms would stay at the angle they were created at. In CS6, depending on where you direct selected the path, would depend on how the path could be/would be adjusted. And the control arms have become more fluid, rather than static. They do not keep the angle they were created.
View 2 Replies
View Related
Jul 30, 2013
How do I get a percentage value in Curves-in CS5 it used to be command-click would make a dot on a point on the curve, to allow for accurate adjustment...
View 8 Replies
View Related
Oct 25, 2013
When making adjustments in the curves panel the procedure in previous editions was to raise the curve in the upper section to lighten the image and lower it to darken the image. Mine is working just the opposite. When i raise (or lift) the curve the image darkens and when I lower it lightens. The lower half for contrast works the in the same backwarsds way.
View 2 Replies
View Related
