In previous verions of Photoshop, when I made a curves adjustment layer, selected the midpoint, then did a shift-arrow adjusstment, it was always in increments of 10. Now in CS6, it is 12 on my machine, 13 and 14 on the two other machines in the office I have checked. Why would that be? Can that be changed so it is 10 again?
Â
FYI - this is all in RGB mode if that matters.
Using CS6, try to open a curves adjustment layer...the way I have for years...levels opens. Will not correct. Have to close the app and reopen. Impossible to find on internet. What's up?
View 21 Replies View RelatedJust upgraded CS6 to CC and really enjoy a lot of the changes but there seems to be a bug with the adjustment layer curves (not regular curves).
Â
If I make a change to the curve using modification point and then toggle "undo", the preview of the image will toggle on and off with the change but the modification point does not reset. This point stays in the original position even if the curves are not in effect and will only reset when another layer is selected before returning back to these curves.
Â
One must also manually reset the point if you wanted to revert back to the original (instead of undo) because if you place another modification point on the curve it will revert back to the change you made earlier.
Many Photoshop users consider the Curves panel to be Photoshop's most important feature. For many Curves users, the Layer panel introduced in CS4 does not offer the speed, the instinctive use, nor the superior results of the older Curves Layer panel.
The Curves dialog includes all the features that long-time users rely on. Some of these features have not been included in the Adjustment Layer version. They should all be available in the Layers panel, too.
After doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type:Â EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
Â
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
In CS3, CS4 and CS5 I was able to:
Â
(a) add a point (corresponding to the position of the Eyedropper Tool on the image) to the RGB composite curve by Control + Clicking; and
Â
(b) add a point (whilst focused on the RGB composite curve) to each of the Red, Green and Blue channel curves by Control + Shift + Clicking.
Â
Neither approach seems to work in my CS6 (PsCs6 x64 latest update, on Win 7x64).
Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable.
But I can still access the RGB channels using the Alt + 3, 4 and 5 shortcuts. This behavior doesn't occur on my workstation, and if I don't crop the image, the drop-down menus work fine. I have the crop tool set to delete pixels. Also, if I apply curves directly (not with an adjustment layer), the dialog box works OK. And the other adjustment layers seem to be working, too. It's only the curves layer that's doing this.
this has been only happening since updating this morning from 13.0.1 - 13.0.2...I have a problem where if I create a new curve layer and then press the preview button on/off it fails to re render the preview and nothing else happens until I OK it. I also notice that it creates history entries on the history panel like I'm making adjustments? Weird!
Â
There's been a few other noticeable things too. The liquify window now doesn't draw as nice and smoothly as it did with 13.0.1. The cursor jitters a lot and control isn't as smooth.
Adjustment layer- curves. I have always used a Curves Adjustment Layer in CS3 to brighten images and increase contrast. I have just upgraded to CS6 and when I open the adjustment layer and try to Command Click choose points in the photograph to drag the line up or down to darken or lighten I get instead some crazy saturation changes.
View 4 Replies View RelatedWhen making adjustments in the curves panel the procedure in previous editions was to raise the curve in the upper section to lighten the image and lower it to darken the image. Mine is working just the opposite. When i raise (or lift) the curve the image darkens and when I lower it lightens. The lower half for contrast works the in the same backwarsds way.Â
View 2 Replies View RelatedI have PS 6.0.1. yes I know its an old version but it does everything i require so I have no need for upgrade.
One of the main function i use it for is adjusting curves. recently I have noticed when i open a jpg and select adjustment/curves. Photoshop automatically selects the eyedropper tool and the curves window is NOT displayed. When i attempt to do anything i get the windows error bell/noise. The only way i can carry on is by selecting escape on my keyboard.
This also happens if i attempt to add a curves adjustment layer. The eyedropper tool becomes selected and no curve adjustment window is displayed.
I have the latest updates for Adobe Photoshop CC. Using the advanced blur filters, such as Tilt Shift do not show any adjustment anchors. If I am lucky enough to run my mouse cursor over them, I get a changed mouse cursor to indicate I came move them. but the references lines, anchor points...nothing is visible to show me where to make the changes or boundaries for such adjustments. I had hoped this bug would be fixed, but apparently not. I am unable to find any other references to it on the forums so maybe it is just me.
Â
I can run my old Photoshop CS6 and they show up just fine. to how to fix this?
I have read several of the discussions about the curves adjustment flyout showing greyed out controls after use. This also happens on my levels adjustment flyout. On my CS6 curves adjustment flyout, the drag control and the edit points control are both showing up as active and at least it appears that the drag control is working properly. Is this problem also one that Adobe is working on?
View 2 Replies View RelatedCS6 is consistenly locking up in the selective color and curves dialog. i.e. I come to the selective color dialog and try to choose the reds and it is stuck on whites, which I used last and I can't change it. I have to quit and relaunch. The same thing is happening with the Curves dialog. I can edit the RGB curve , but can't select the R, G or B channels until I relaunch. It works for a while and then it just stops.
View 4 Replies View Related1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Â
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
Â
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies View RelatedI'm familiar with adjustment layers and clipping masks, but am wondering if there's a way to have an adjustment layer affect a group of layers below it, but not all of them. (Usually you have a choice of having it affect either JUST the layer beneath it (through a clipping mask), or ALL of the layers beneath it.
View 5 Replies View RelatedSome of the options in Layer>New Adjustment Layer are gray.
I don't know why I can't click them. I need to use Color Balance.
Using Photoshop CS.
When you open an image with adjustment layers, what determines what is selected, the background or the adjustment layer? It seems sometimes it's one or the other, and I don't know the logic. Personally I would prefer that the image always opens with the background layer selected.
View 5 Replies View RelatedI'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedI'm working in Photoshop CS5. I have several layers, and only want to make an adjustment to the top layer. I don't have an clip icon on the bottom of the layers pallete either, what should I do...
View 4 Replies View RelatedI want to add an new adjustment layer to a layer but not have it affect the layers below it?
View 4 Replies View RelatedIn CS5 is there any way to have the Curves Layer Dialog revert back to the old standard interface? When you click Image/Adjustments/Curves you get the standard interface. But when you create a curves adjustment layer you get a horrible new interface, which has been "improved" to the point of being totally useless.
I recently upgraded from CS3, mainly to get the latest ACR to work with a newer camera's RAW files. I use curve layers extensively and have spent a lot of time with CS5, but the new curves layer interface is so incredibly difficult and exasperating that I have now reinstalled CS3 and use it for all my work. I use CS5 to convert from RAW, save as PSD, then open the file in CS3 to do the work.
Im creating a layout in CMYK and have a brigthness/contrast layer above my artwork. Once I merge the layers together (save it as TIFF) the contrast is not the same and I cant get the same color/contrast effect when I do it in flattened image. Any ideas how to solve this problem?I was thinking of taking screenshots of the "pre-merged" layout and putting it together but its a rather large file...
View 1 Replies View RelatedI worked on a phot and tried to save it as a jpg among other formats. The file that saves is missing one of the adjustment layers?
View 1 Replies View RelatedIn CS3, my workhorse editor until recently, when I double clicked an adjustment layer it opened up the initial settings window. There I was able to tab browse through the variables, make whatever adjustments I wanted, hit enter, and live happily ever after. I haven't been able to figure out how do do this in CS6, which has the 'properties' panel for making changes to adjustment layer settings.
Â
The question: Can CS6 be set to behave like CS3 in this respect?
Boosting the vibrance using a vibrance adjustment layers is the same thing as just increasing saturation?
View 3 Replies View Related1) I'm not clear about when I should use an ordinary "new layer" and when an "adjustment layer"; are there instances when either will work and others when only one will; and
2) I think I've come across something funny about using an opacity setting: Say I've used one of the brush tools and, then, toned things down by lowering the opacity. I then go on to save the photo and quit PE. Well, when I open that photo again, the opacity comes already set as it was before. I find this confusing, especially if I go on to do something else involving opacity. Somehow it makes more sense to me to always begin fresh at "100%".
I'm almost finished with a project, but like always at the end something has to go wrong.
So I'm trying to make this sort of portal (based on a videogame).
I got the portal like I want it to be, but when I link the Color Balance effect to the Portal layer (so that it only effects that layer) the color just disappears, leaving me with a white portal.
But it needs to be done, otherwise it effects my other layers to and turn everything red.
When I link layers this happens:
But if I don't, it of course turns everything red:
how to make an adjustment layer and make the adjustments when the dialog/window pops up. Then I click OK and the layer appears in the Layers Pallet. So now lets say I want to refine the adjustment I just OKed. Is there a way to get the adjustment dialog to open up again? Or do I have to delete the first adjustment layer and start over on that adjustment?
View 2 Replies View Related