Photoshop :: CS4 X64 Severe Brush Lag And No...
Oct 23, 2008
When I use Photoshop CS4 Extended x64, I experience really bad brush lag when drawing. This doesn't happen with the 32-bit version, and unfortunately it seems to make x64 the default version to open everything with (such as Open With and file associations).
I also do not have any pressure sensitivity with the x64, but the 32-bit version is absolutely fine. I'm using a Wacom tablet.
Can anyone explain why it's so bad in the x64 version and any possible way to fix these two problems?
It would be nice to fix this issue so I can actually use the x64 version, however at the minute it would be easier to just use the 32-bit version. Unfortunately I cannot seem to get it to use this instead of the x64 when opening files from Explorer. It's very iritating. I have tried to uninstall the x64 one, but I don't see an option to keep the 32-bit version on.
I'm running Vista Ultimate x64 SP1, 8800 GT, 4GB RAM, GPU settings all on in CS4.
View 2 Replies
ADVERTISEMENT
Jun 27, 2013
I have been having this issue with certain uses of Puppet Warp and I'm not sure if it's how I'm using, the settings I have for the warp or my computer.
It happens on two different MacBook Pros with 8GB of RAM, on Mac OS X 10.8.4..I will spend about 40 minutes warping a photo converted to a Smart Object so that it looks like it's wrapping around a blanket like so..I can save the file, and edit the photo more as time goes on and nothing is odd... until I save and come back to the file later.
When I open the file and try to edit the photo in the Smart Object, reduce the size of the entire image, or even just double-click on the Puppet Warp filter on the layer panel, it does this:
The pins are way off the board, the image looks like it's split into different parts and the only way to get it back is to Undo any changes. The settings for the Puppet Warp are: Normal, Normal, 2px The image is 7"x5" at 240dpi.
This doesn't happen with all of my Puppet Warped images, but this one shows this behavior every single time. At one point I went in and recreated the Smart Object and Puppet Warp and it did the exact same thing after I was finished. This happens in both CS6 and the new CC versions of Photoshop.
View 4 Replies
View Related
Aug 14, 2012
I just got a new laptop (Apple Mac book pro with OSX 10.8 Mountain Lion) and a fresh installation of Adobe CS6 and Photoshop is practically unusable. The issues are that there is weird color banding across the full size image (it looks fine in the thumbnail preview in the ‘navigator’ tab). These bands move and change. Next, when I use the selection tool it selects weird shapes. And if I attempt to fill it, the fills are not the color, nor the transparency nor the shapes that I set. That means masks can’t be used and pretty much no editing is possible. Some blog posts describe a similar problem, and propose changing the ‘Performance’ preferences .
View 4 Replies
View Related
Jun 5, 2012
I have this problem in X4 and also in X5. When I load MP4 files from my HD camcorder I can preview the clips fine. When I drop them into the timeline, and play the project, the clips are mostly pixelated. When I open other projects that I created in X4 last year using the same type type of mp4 files, I see no pixelation in the project preview. All of these mp4 files are using smart proxy.
View 5 Replies
View Related
Jan 31, 2012
Put differently: Is it possible to severe the connection between two nodes ?
View 5 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
View 13 Replies
View Related
Nov 11, 2012
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies
View Related
May 28, 2013
you can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
View 6 Replies
View Related
Sep 8, 2012
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies
View Related
Jul 27, 2012
When i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.
View 2 Replies
View Related
Jan 24, 2013
The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
View 2 Replies
View Related
Jan 29, 2011
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies
View Related
Apr 13, 2013
There are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
View 11 Replies
View Related
Dec 19, 2012
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies
View Related
Jun 16, 2013
the brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100%
in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
View 10 Replies
View Related
Sep 29, 2012
When I use the Adjustment Brush in Camera Raw it frequently just gives me a pin instead of a brush. How can I fix this? I'm on a Mac in Snow Leopard.
View 4 Replies
View Related
Jan 26, 2008
I tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
View 3 Replies
View Related
Nov 18, 2012
When I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies
View Related
May 28, 2007
Hi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
View 2 Replies
View Related
Oct 3, 2013
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
View 2 Replies
View Related
Feb 13, 2013
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies
View Related
Jul 5, 2012
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies
View Related
Feb 5, 2014
I'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
View 6 Replies
View Related
Jun 11, 2013
When I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
View 1 Replies
View Related
Feb 8, 2012
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
View 5 Replies
View Related
Oct 24, 2012
From the Brush Presets Panel, I choose Basic Brushes from the drop down menu. Then Replace. The new choice of brushes appear in the Brush Panel and in the Brush Presets Panel.
But in the Brush Panel, additional brushes appear.
There are always more brushes in the Brush Panel than the Brush Presets Panel whenever I Replace. The Brushes Preset Manager is populated with identical brushes as the Brush Presets Panel. What determines the additional brushes that appear in the Brush Panel?
View 4 Replies
View Related
Jun 1, 2012
I'm comparing the CS5 & CS6 mixer brush, with moist, light mix, right now...At first I wondered why the CS6 mixer brush was slower, until I realized that it looks like the actual brush stroke in CS6 is more advanced. The CS6 stroke looks like it's calculating the overlapping brush strokes & it's interaction with the texture more accurately to real life.
I haven't read any articles on improvements to the CS6 mixer brush. Has it actually improved or are my settings just different in CS6 from CS5? since I'll probably need to work with "Sample All Layers" unchecked when working with the CS6 mixer brush.
View 1 Replies
View Related
Feb 20, 2013
When using the brush tool, I'm getting a weird X as the brush tip. It's not the crosshairs that happens when Caps Lock is on, but it's more like two curved lines forming an X. I can't find where my brush edges are when this happens. It's a real pain!
Here's a picture of the crosshairs. How to turn it off? I'm using CS6 and running Windows 7 Pro 64-Bit.
View 1 Replies
View Related
Aug 22, 2013
I'm experiencing some brush lag, but not at first. When I open Photoshop, there's no lag at all. But, sure enough, as soon as I begin to work for 15 or so minutes, I begin to get brush lag that gets worse as times goes on. Restarting the program fixes the lag temporarily until it happens again shortly after. I'm using Photoshop CS5.1. I've already given Photoshop 100% of my CPU.
View 5 Replies
View Related
Nov 14, 2012
wanted to know what kind of brush is used here and how did he make the text 3D?
Whats the brush used here and how did he made it 3D? [URL]....
View 1 Replies
View Related
Feb 13, 2005
How do i add brushes? plz give me a clean and understanding guide/.
View 1 Replies
View Related
